LG GB-B2731PZ Owner's manual

MFL62883374

Rev.02_033020

18

19

21

22

24

To Reverse the Doors(Optional)

Setting Wi-Fi

Freezer Compartmet(Optional)

LG ThinQ Application

Smart Diagnosis

Optinoal

Accessory

Dimensions and Clearances

If there is a gas leakage

(isobutane, propane,

natural gas, etc.), do not

touch the appliance or power plug and

ventilate the area immediately. This appliance

uses a refrigerant gas (isobutane,R600a).

Although it uses a small amount of the gas, it

is still combustible gas. Gas leakage during

appliance transport, installation or operation

can cause fire, explosion or injury if sparks

are caused.

Risk of Fire and Flammable Materials

This symbol alerts you to

flammable materials that can

ignite and cause a fire if you

do not take care.

• This appliance contains a small amount of

isobutane refrigerant (R600a), but it is also

combustible. When transporting and

installing the appliance, care should be

taken to ensure that no parts of the

refrigerating circuit are damaged.

• If a leak is detected, avoid any naked flames

or potential sources of ignition and air the

room in which the appliance is standing for

several minutes. In order to avoid the

creation of a flammable gas air mixture if a

leak in the refrigerating circuit occurs, the

size of the room in which the appliance is

used should correspond to the amount of

refrigerant used. The room must be

1 m² in size for every 8 g of R600a

refrigerant inside the appliance.

• When positioning the appliance, ensure the

supply cord is not trapped or damaged.

•

Do not locate multiple portable socket-outlets

or portable power supplies at the rear of

the appliance.

1

2

3

Accessory

Dimensions and Clearances

Too small of a distance from adjacent items may result in degradation of freezing capability

and increased electricity costs. Allow over 50mm clearance from each adjacent wall when

installing the appliance.

F

H

G

D

E

541

Size (mm)

578

643

y

Setting Wi-Fi

The Wi-Fi button, when used with the LG

ThinQ application, allows the refrigerator to

connect to a home Wi-Fi network.

The Wi-Fi icon shows the status of the

refrigerator’s network connection. The icon

illuminates when the refrigerator is connected to

the Wi-Fi network.

Press and hold the Wi-Fi button for 3 seconds to

connect to the network. The icon blinks while the

connection is being made, then turns on once the

connection is successfully made.

y

Freezer Compartment (Optional)

If a large quantity of food is to be placed in the

freezer compartment,

The middle drawer of freezer compartment

shall be taken out of the appliance and food

shall be stacked directly on the wire shelf.

Freezer compartment provides wire shelf on

default to maximize food storage capacity. And

also the drawer is provided to convenient usage

for watery meat or half-liquid state food.

Notes for Operation

• If you are leaving the appliance turned off for

an extended period of time, remove all food

and unplug the power cord. Clean the interior,

and leave the doors slightly ajar to prevent

mold from growing in the appliance.

• The automatic defrosting system in the

appliance ensures that the compartment

remains free of ice buildup under normal

operating conditions

CAUTION!

1. Before cleaning, make sure that power

1.

supply is switched off;

2. Outside and inside, the refrigerator should

2. For products with a stainless steel exterior,

use a clean sponge or soft cloth and a

mildDetergent in warm water.

Do not use abrasive or harsh cleaners.

Dry thoroughly with a Soft cloth.

Do not use appliance wax, bleach, or other

products containing chlorine on stainless

steel.

be washed with a clean napkin wetted in

warm water with a liquid detergent.

Then wipe dry with a dry napkin;

3. After cleaning, make sure that the power

cord is not damaged.

Then tightly insert the plug to the power

outlet.

CLEANING

It is prohibited to use abrasive materials,

gasoline, benzene, solvents, hydrochloride,

hot water, hard brushes, etc., which may

damage the refrigerator surface.

• If there are chill compartments in the

appliance, do not store vegetables and fruits

with higher moisture content in the chill

compartments as they may freeze due to the

lower temperature.

• In the event of a blackout, call the electricity

company and ask how long it is going to last.

− You should avoid door openings while the

power is off.

− When the power supply gets back to normal,

check the condition of the food.

To Reverse the Doors(Optional)

Your fridge-freezer is designed with reversible

doors,so that they may open from either the left

or right hand side to suit your kitchen design.

However, when you want to reverse the

doors, you must call to service agent.

Reversing the doors is not covered by the

warranty.

21

LG ThinQ Application

Before Using LG ThinQ Application

1

Check the distance between the appliance

and the wireless router (Wi-Fi network).

• If the distance between the appliance and

the wireless router is too far, the signal

strength becomes weak. It may take a

long time to register or installation may

fail.

2

Turn off the Mobile data or Cellular Data

on your smartphone.

NOTE

• To verify the Wi-Fi connection, check that

Wi-Fi

icon on the control panel is lit.

• The appliance supports 2.4 GHz Wi-Fi

networks only. To check your network

frequency, contact your Internet service

provider or refer to your wireless router

manual.

• LG ThinQ is not responsible for any

network connection problems or any faults,

malfunctions, or errors caused by network

connection.

• If the appliance is having trouble connecting to

the Wi-Fi network, it may be too far from the

router. Purchase a Wi-Fi repeater (range

extender) to improve the Wi-Fi signal strength.

• The Wi-Fi connection may not connect or may

be interrupted because of the home network

environment.

• The network connection may not work

properly depending on the Internet service

provider.

• The surrounding wireless environment can

make the wireless network service run slowly.

• The appliance cannot be registered due to

problems with the wireless signal

transmission. Unplug the appliance and wait

about a minute before trying again.

• If the firewall on your wireless router is

enabled, disable the firewall or add an

exception to it.

• The wireless network name (SSID) should be

a combination of English letters and numbers.

(Do not use special characters.)

• Smartphone user interface (UI) may vary

depending on the mobile operating system

(OS) and the manufacturer.

• If the security protocol of the router is set to

WEP, you may fail to set up the network.

Please change it to other security protocols

(WPA2 is recommended) and register the

product again.

3

Connect your smartphone to the wireless

router.

This feature is only available on models with Wi-Fi.

The LG ThinQ application allows you to communicate

with the appliance using a smartphone.

LG ThinQ Application Features

Communicate with the appliance from a smart phone

using the convenient smart features.

Smart Diagnosis

• If you experience a problem while using the

appliance, this smart diagnosis feature will help you

diagnose the problem.

Settings

Allows you to set various options on the refrigerator and

in the application.

NOTE

• If you change your wireless router, Internet service

provider, or password, delete the registered appliance

from the LG ThinQ application and register it again.

• The application is subject to change for appliance

improvement purposes without notice to users.

• Functions may vary by model.

Page is loading ...

LG GB-B2731PZ, GB-B3121PZ Owner's manual

Related papers