Lifetime 60058 Owner's manual

Brand: Lifetime

Model: 60058

Type: Owner's manual

Lifetime 60058 is a sturdy outdoor storage solution that is ideal for gardening enthusiasts. It's designed to provide ample space for storing compost and related gardening supplies, making it a practical choice for yards and gardens. The composter features a durable construction with a reinforced base frame for added stability.

MODEL N° 60058

OWNER’S MANUAL

OUTDOOR STORAGE

Keep this Identiﬁcation Number in case you must contact our Customer Service Department.

Copy

Most injuries are caused by misuse and/or not following instructions. Use caution when using this product.

To ensure safety, do not attempt to assemble this product without following the instructions carefully. Check entire box and inside all

packing material for parts and/or additional instruction material. Before beginning assembly, read the instructions and identify parts

using the hardware identiﬁ er and parts list in this document. Proper and complete assembly, use and supervision are essential to

reduce the risk of accident or injury.

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY

DAMAGE AND WILL VOID WARRANTY.

t%POPUVTFPSTUPSFIPUPCKFDUTTVDIBTHSJMMTCMPXUPSDIFTXFMEJOHFRVJQNFOUFUDOFBSUIFQSPEVDU

t*GVTJOHBMBEEFSEVSJOHBTTFNCMZVTFFYUSFNFDBVUJPO

t5XPDBQBCMFBEVMUTBSFSFRVJSFEGPSBTTFNCMZ*UJTBMTPSFDPNNFOEFEUIBUBUIJSEBEVMUGVODUJPOBTBOJOTUSVDUJPOSFBEFS

SAFETY INSTRUCTIONS

LIFETIME’S PROMISE TO YOU:

We invite you to read our privacy policy at www.lifetime.com

There are beneﬁ ts to registering your Lifetime product. With our new online product registration form, it’s fast and easy! Register with us at www.lifetime.com

and enjoy these great beneﬁ ts:

t3FDFJWFFYDMVTJWFNPOFZTBWJOHPGGFSTGSPN#VZ-JGFUJNFDPNPVSPOMJOFTUPSFBTXFMMBT/&8QSPEVDUOPUJmDBUJPOTBOETQFDJBMDMPTFPVU

promotions!

t*OUIFVOMJLFMZFWFOUPGBQSPEVDUSFDBMMPSTBGFUZNPEJmDBUJPOXFXJMMOPUJGZZPV

t3FHJTUFSJOHZPVSQSPEVDUHVBSBOUFFTZPVXBSSBOUZTFSWJDF*GZPVEPOPUSFHJTUFSZPVSQSPEVDUZPVSXBSSBOUZSJHIUTXJMMOPUCFEJNJOJTIFE

But you will need to provide a sales receipt to verify your product purchase date before warranty service will be provided.

Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that Lifetime will not sell or provide your

personal data to other third parties, or allow them to use your personal data for their own purposes.

**For customers outside the U.S. or Canada, please contact the store for assistance.**

**U.S. and Canada customers ONLY**

*'"44*45"/$&*4/&&%&%

DO NOT CONTACT THE STORE!

CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865

)0634BNUPQN.POEBZUISPVHI'SJEBZ.PVOUBJO4UBOEBSE5JNF

**Call, or visit our Web site for Saturday hours**

t5XPDBQBCMFBEVMUTBSFSFRVJSFEGPSBTTFNCMZ

Instruction #1074045 D 7/06/2011

Copy

*Two adults required to complete assembly*

Only adults should set up the product. Do not allow children

in the set-up area until assembly is complete.

BEFORE BEGINNING ASSEMBLY

,FFQUIFIBSEXBSFCBHTBOEUIFJSDPOUFOUTTFQBSBUF*GBOZQBSUTBSFNJTTJOHDBMMPVS

$VTUPNFS4FSWJDF%FQBSUNFOU



*Two adults required to complete assembly*

3/4" 7/16”

(1) (1)

#2 Phillips

Screwdriver

(1)(1)

(1) (1)

Power Drill

Socket Wrench

with 1/2” & 3/4” Sockets

Rubber Mallet

1/8" Drill Bit

*ODMVEFE

(1)

Safety Glasses

(1 for each person)

TOOLS AND PARTS REQUIRED FOR THIS ASSEMBLY

This area is located at the top, left-hand

corner of the page and indicates which tools

and hardware are needed to complete the

assembly steps on a page.

This area is located at the top, right-hand

corner of the page and shows an image of the

product with shaded parts indicating which

section is being assembled.

SEC

Note:

Refer to the following areas throughout the instructions

to assist in the assembly process:

This area is usually located in the bottom,

left-hand corner of a step and indicates that

special attention is needed to perform a

particular part of a step.

These areas are usually located in the bottom,

right-hand corner of a step and indicate that

damage to the product or serious injury may

occur if the caution or warning is not heeded.

Throughout the Parts & Hardware List, Part

& Hardware Identiﬁ ers, and instructions

are three-letter IDs. These IDs are below

the images of the parts and hardware to

help you locate and identify the parts and

hardware during assembly. These IDs are not

necessarily on the parts themselves.

WARNING

ASSEMBLY GUIDES

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

CAUTION

ADZY

wYw1BO)FBE4DSFX

MAIN COMPOSTER PARTS

ID Description Qty

#)/  1BOFM-JE 

#).  &OE1BOFM 

#**  "'SBNF8FMENFOU 

#*)  $PNQPTUFS-FH 

#)2  7FOUJMBUJPO5VCF 

#)1  .PVOUJOH&OE1MBUF 

#*6  *OTUSVDUJPOT)PXUP$PNQPTU/PU4IPXO 

BIV COMPOSTER PARTS KIT

#*9  -PDLJOH1JO"TTFNCMZ 

#*:  1JOOFE)JOHF 

#*;  -BUDI)PPL 

#+"  -BUDI"TTFNCMZ 

#+#  )JOHF5VCF 

#+$  %PVCMF)PPL4USBQ 

ID Description Qty

BJJ HARDWARE BAG

BIS TUMBLER ASSEMBLY HARDWARE

#)0  w4UFFM'MBU8BTIFS 

""/  w$BQ/VU 

#5,  #MPXIPMF1MVH 

#*3  wYw$BSSJBHF#PMU 

#),  1MBTUJD/VU 

"%8  Yw1IJMMJQT1BO)FBE4DSFX 

"%.  w/ZMPDL/VU 

#*,  wYw)FY)FBE#PMU 

#*-  4MFFWF 

#*0  w'MBU8BTIFS 

#*.  #MBDL1MBTUJD4QBDFS 

#*1  w'MBU8BTIFS 

",)  (SFBTF1BDLFU 

"3"  w%SJMM#JU 

BIT BASE ASSEMBLY HARDWARE

#*+  *OOFS)PVTJOH#SBDLFU 

#*/  -PDLJOH1JO4QSJOH 

#)+  Yw4FMG5BQQJOH4DSFX 

"#6  wYw$BSSJBHF#PMU 

"%+  w$BQ/VU 

PARTS & HARDWARE LIST

PARTS IDENTIFIER

Main Composter Parts

1BSUTBSFTIPXOPGBDUVBMTJ[F

BHNY

1BOFM-JE

BHQY

Ventilation Tube

BHMY

&OE1BOFM

BHPY

.PVOUJOH&OE1MBUF

XJUIB8BSOJOH4UJDLFS

BOEXJUIPVU

PARTS IDENTIFIER

Main Composter Parts

1BSUTBSFTIPXOPGBDUVBMTJ[F

BJAY

-BUDI"TTFNCMZ

BIZY

-BUDI)PPL

BJBY

Hinge Tube

BIYY

Pinned Hinge

BJCY

%PVCMF)PPL4USBQ

Composter Parts Kit [BIV]

1BSUTBSFTIPXOPGBDUVBMTJ[F6OMFTTJOEJDBUFEPUIFSXJTF

BIXY

-PDLJOH1JO"TTFNCMZ

BIIY

"'SBNF8FMENFOU

BIHY

$PNQPTUFS-FH

WARNING

0OMZVTFUIF-PDLJOH1JOUPIPMEUIF5VNCMFS

JOQMBDF%POPUVTFUIF-PDLJOH1JOUPTUPQB

spinning Tumbler. Failure to heed this warning

XJMMSFTVMUJOEBNBHFUPUIF-PDLJOH1JO

HARDWARE IDENTIFIER

BIMY

Black Plastic Spacer

ADMY

w/ZMPDL/VU

BIKY

wYw)FY)FBE#PMU

BIJY

*OOFS)PVTJOH#SBDLFU

BINY

-PDLJOH1JO4QSJOH

BIPY

w'MBU8BTIFS

AKHY

(SFBTF1BDLFU

BHJY

Yw4FMG5BQQJOH4DSFX

BILY

Sleeve

BIOY

w'MBU8BTIFS

Base Assembly Hardware [BIT]

)BSEXBSFJTTIPXOBUBDUVBMTJ[F6OMFTTJOEJDBUFEPUIFSXJTF

Tumbler Assembly Hardware [BIS]

)BSEXBSFJTTIPXOBUBDUVBMTJ[F

ADWY

Yw1IJMMJQT1BO)FBE4DSFX

0OMZBSFVTFE

BTKY

Blow Hole Plug

BIRY

wYw$BSSJBHF#PMU

ARAY

w%SJMM#JU

BHOY

w4UFFM'MBU8BTIFS

AANY

w$BQ/VU

BHKY

1MBTUJD/VU

0OMZBSFVTFE

ADJY

w$BQ/VU

ABUY

wYw$BSSJBHF#PMU

Safety Glasses

BASE FRAME ASSEMBLY

HARDWARE REQUIRED

PARTS REQUIRED

SMALL PARTS REQUIRED

TOOLS REQUIRED

SEC

Phillips Screwdriver

BINY

-PDLJOH1JO4QSJOH

BIXY

-PDLJOH1JO"TTFNCMZ

BIJY

*OOFS)PVTJOH#SBDLFU

BHJY

Yw4FMG5BQQJOH4DSFX

Electric Drill w/Phillips Head

1BSUTBSFTIPXOPGBDUVBMTJ[F

1BSUTIPXOBUBDUVBMTJ[F

BIIY

"'SBNF8FMENFOU

BIHY

$PNQPTUFS-FH

1BSUTBSFTIPXOBUBDUVBMTJ[F6OMFTTJOEJDBUFEPUIFSXJTF

7/16” Wrench

ADJY

w$BQ/VU

ABUY

wYw$BSSJBHF#PMU

HARDWARE BAG REQUIRED: BIT

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

Outer Housing Brackets are

on the outside.

SEC

1.1

Set the two A-Frame Weldments (BII)POUIFHSPVOEBTTIPXO8IJMFPOFBEVMUIPMETUIF"'SBNF8FMENFOUTJOUIF

positions shown, insert a Composter Leg (BIH)JOUPUIFUVCFTPGUIF"'SBNFRepeat this step for the second Composter

Leg.

BIH

BII

BASE ASSEMBLY

2 ADULTS REQUIRED FOR THIS STEP

NO HARDWARE REQUIRED FOR THIS STEP

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

1.2

4FDVSFUIF-FHTUPUIF"'SBNFTVTJOHGPVS#8 x 1/2” Phillips Self-Tapping Screws (BHJ)BOETFU#BTF"TTFNCMZ

upright. Do not overtighten Screws.

BHJ

BHJY

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

1.3

SEC

1.4

Slide the Locking Pin Spring (BIN) up and over the Locking Pin Assembly (BIX) as shown.

BIN

BIX

4UBOEUIF#BTFVQSJHIUBOETMJEFUIFDVSWFEFOEPGUIF-PDLJOH1JOUISPVHIUIFUPQIPMFJOPOFPGUIF0VUFS

)PVTJOH#SBDLFUTPGUIF"'SBNFBTTIPXO

BINY

BIXY

WARNING

0OMZVTFUIF-PDLJOH1JOUPIPMEUIF5VNCMFS

JOQMBDF%POPUVTFUIF-PDLJOH1JOUPTUPQB

spinning Tumbler. Failure to heed this warning

XJMMSFTVMUJOEBNBHFUPUIF-PDLJOH1JO

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

BIJ

ABU

ADJ

Locking Pin

BIJY

/PUUPTDBMF

ADJY

ABUY

SEC

1.5

One by one, place the two Inner Housing Brackets (BIJ) BHBJOTUUIFUPQTPGUIF"'SBNFTBOEBMJHOUIFIPMFTBT

TIPXO5IFFOEPGUIF-PDLJOH1JO"TTFNCMZHPFTUISPVHIUIFUPQIPMFJOPOFPGUIF*OOFS)PVTJOH#SBDLFUT

4FDVSFUIF*OOFS)PVTJOH#SBDLFUTUPUIF"'SBNFTVTJOHPOF1/4” x 1 1/2” Carriage Bolt (ABU)BOEPOF1/4”

Cap Nut (ADJ) for Bracket.

7/16”

WARNING

%POPUPWFSUJHIUFOUIF$BQ/VU*GUIFFOEPG

the Bolt breaks through the plastic cap, call our

$VTUPNFS4FSWJDF%FQBSUNFOU&YQPTFEUISFBET

on the end of the Bolt may cause serious injuries.

TUMBLER ASSEMBLY

HARDWARE REQUIRED

HARDWARE BAG REQUIRED: BIS

SMALL PARTS REQUIRED

SEC

)BSEXBSFJTTIPXOBUBDUVBMTJ[F

ADWY

Yw1IJMMJQT1BO)FBE4DSFX

0OMZBSFVTFE

BTKY

Blow Hole Plug

BIRY

wYw$BSSJBHF#PMU

BHOY

w4UFFM'MBU8BTIFS

AANY

w$BQ/VU

BHKY

1MBTUJD/VU

0OMZBSFVTFE

1BSUTBSFTIPXOPGBDUVBMTJ[F6OMFTTJOEJDBUFEPUIFSXJTF

BJAY

-BUDI"TTFNCMZ

BIZY

-BUDI)PPL

BJBY

Hinge Tube

BIYY

Pinned Hinge

BJCY

%PVCMF)PPL4USBQ

BIKY

wYw)FY)FBE#PMU

BILY

Sleeve

BIPY

w'MBU8BTIFS

BIOY

w'MBU8BTIFS

BIMY

Black Plastic Spacer

ADMY

w/ZMPDL/VU

AKHY

(SFBTF1BDLFU

Safety Glasses

TUMBLER ASSEMBLY (CONT.)

PARTS REQUIRED

TOOLS REQUIRED

SEC

Phillips Screwdriver

Socket Wrench with 1/2” & 3/4” Sockets Electric Drill w/Phillips Head

Rubber Mallet

1BSUTBSFTIPXOPGBDUVBMTJ[F

BHNY

1BOFM-JE

BHQY

Ventilation Tube

BHMY

&OE1BOFM

BHPY

.PVOUJOH&OE1MBUF

XJUIB8BSOJOH4UJDLFSBOE

XJUIPVU

1/8” Drill Bit (ARA) (Included)

3/4” Wrench

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

2.1

Using an electric drill and the 1/8” Drill Bit (ARA)ESJMMUISPVHIUIFUFOEJWPUTBMPOHUIFFEHFTPGUXPPanel/

Lid (BHN) as shown. Do not drill through the edges of the third Panel/Lid (BHN).

ARAY

NO HARDWARE REQUIRED FOR THIS PAGE

Note: Do not drill through the edges of the third Panel/Lid (BHN).

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

2.2

Using an electric drill and the 1/8” Drill Bit (ARA)ESJMMUISPVHIUIFUFOEJWPUTBMPOHUIFFEHFTPGCPUI&nd

Panels (BHN) as shown.

ARAY

NO HARDWARE REQUIRED FOR THIS PAGE

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

2.3

"UUBDIUIFMounting End Plate (BHP) with the warning sticker to an End Panel (BHM) with the warning sticker just below

UIF-JGFUJNFMPHPVTJOHUISFF5/16” x 3/4” Carriage Bolts (BIR)UISFF5/16” Steel Flat Washers (BHO)BOEUISFF

5/16” Cap Nuts (AAN) as shown. Repeat this step for the second End Panel.

TUMBLER ASSEMBLY

BIRY

BHOY

AANY

AAN

BHO

BIR

BHM

BIR

BHP

Warning Sticker

1/2”

The extruded end of the Mounting End Plate

goes toward the Tumbler.

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

2.4

SEC

2.5

Slide a 1/2” Flat Washer (BIO), Sleeve (BIL), and 5/8” Flat Washer (BIP) over a 1/2” x 2 3/4” Hex-Head Bolt (BIK).

Tear open the Grease Packet (AKH)BOEBQQMZ(SFBTFBSPVOEUIF4MFFWFBTTIPXORepeat steps 2.4 - 2.5 for the second

set of Washers, Bushing, Sleeve, and Hex Bolt.

Tear here

BIK

BIO

BIL

BIP

BILY

BIKY

2 3/4”

BIOY

BIPY

AKH

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

2.6

-JGUUIF&OE1BOFMXJUIUIF.PVOUJOH&OE1MBUFDPOUBJOJOHUIFXBSOJOHTUJDLFSVQUPUIF"'SBNFXJUIUIF

-PDLJOH1JO*OTFSUUIF#PMU8BTIFSBOE4MFFWF"TTFNCMZUISPVHIUIF&OE1BOFMBOEPVUUISPVHIUIF"'SBNF

as shown. Be sure to insert a Black Plastic Spacer (BIM) between the End Panel and the Inner Housing Bracket of the A-Frame

as shown.

BIMY

Bolt, Washer, and Sleeve Assembly Y

'SPNQSFWJPVTTUFQT/PUUPTDBMF

BIM

Bolt, Washer, and

Sleeve Assembly

Warning Sticker

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

2.7

4FDVSFUIF&OE1BOFMUPUIF"'SBNFVTJOHUIFSFRVJSFEIBSEXBSFRepeat steps 2.6 - 2.7 for the second End Panel.

3/4”

BIOY

BIO

ADMY

ADM

3/4”

Page is loading ...

Lifetime 60058 Owner's manual

Lifetime 60058 Owner's manual

Lifetime 60058 Owner's manual

Related papers

Other documents