Ross LN2RTA400 User manual

Brand: Ross

Model: LN2RTA400

Category: Flat panel wall mounts

Type: User manual

Ross LN2RTA400 is a tilt and turn TV wall mount designed for easy installation. It comes with a variety of screws to fit most TV brands and models, and can hold TVs of various sizes. The mount allows you to tilt and turn your TV to find the perfect viewing angle, and it has a sturdy construction to keep your TV safe and secure.

Ross LN2RTA400 is a tilt and turn TV wall mount designed for easy installation. It comes with a variety of screws to fit most TV brands and models, and can hold TVs of various sizes. The mount allows you to tilt and turn your TV to find the perfect viewing angle, and it has a sturdy construction to keep your TV safe and secure.

3

3

7

LN2RTA400

Tilt & turn

TV wall mount

Whilst every effort has been made to ensure that the provided screws are suitable for connecting the mount to the vast majority of

TV brands and models, Ross cannot be held responsible on the rare occasion that the supplied screws are not sufﬁcient.

Contact us for more information at [email protected]

x1 x6 x6

Easy installation:

Scan for installation video

For more information visit:

www.ross.uk

x4

E

x2

D

x2

F

SET INCLUDES

x4

M4

1

G

x4

2

G

x4

8

G

x4

1

H

x4

3

G

x4

4

G

x4

5

G

x4

6

G

M4

M5

M5

M6 M6

x4

7

G

M8

M8

x4

2

H

Once hooked onto the mount bracket

you should hear or feel that the TV clicks

into place.

B

D

C

7/8

1/2

1

H

G

3/4/5/6

2

H

G

1

E

1

H

G

7

E

G

3/5

E

2

H

G

G

H

F

1

2

3

5 6

Hold each side of the TV with the hooks facing

away from you.

Taking note which end is the top of the TV, lie your TV

onto the ﬂoor. Using the assortment of ﬁxings

provided select the appropriate ones to hold the

mount (G) onto the TV. ensuring that the mount has

the threaded hole in the center is at the bottom of the

TV ensuring not to over-tighten.

Using the provided self taping

screws B type). Holding the TV

mount starting in the one corner,

screw the provided screws (B) into

a wooden joist ﬁxing the opposite

corners, until the mount is secure

onto the wall. Ensure all are tight

and secure.

When selecting the position of the TV

mount. Ensuring that the mount will

be mounted on to a ﬂat surface and is

level. Mark the wall where the ﬁxing

locations are. Drill the holes using a

10mm masonry bit. Using a hammer

knock the the wall plugs (C) provided

into the wall. Holding the TV mount

start in the one corner screw the

provided screws (B) into the wall

ﬁxing the opposite corners until the

mount is secure onto the wall. Ensure

all are tight and secure.

When selecting the position of the

TV mount ensure that it is ﬁxed

onto a wooden joist or onto a solid

wall. Mark the wall where the ﬁxing

locations are ensuring that the

mount will be mounted on to a ﬂat

surface and is level.

4

Remove the cover from the base of the mount. before marking the wall where the mount needs to be.

Tighten the screws indicated in the image into the

required angle using the provided Allen (D) key reﬁt

the cover.

E

1
2

Ross LN2RTA400 User manual

Brand: Ross

Model: LN2RTA400

Category: Flat panel wall mounts

Type: User manual

Ross LN2RTA400 is a tilt and turn TV wall mount designed for easy installation. It comes with a variety of screws to fit most TV brands and models, and can hold TVs of various sizes. The mount allows you to tilt and turn your TV to find the perfect viewing angle, and it has a sturdy construction to keep your TV safe and secure.

Download PDF

Related papers

Other documents