Optima Scale Bench User guide

Type
User guide
Platform
Column
Indicator U-Bracket
Hardware
T-Adapter
Remove
Remove
Tag
Tray
Pull
Lift tray, and remove the four
yellow rubber frame protectors tags
Remove
Before Using!!!
Cable
Carefully, without tugging, run the
cable through the column and
assemble column to base
Cable
Assemble T-Adapter and U-bracket
as shown below
Install indicator to U bracket with
2 knobs and connect the cable to
the indicator interface port
Tray
Feet
Level Bubble
Place the tray on the scale frame;
Use level bubble to
level the scale by
adjusting the feet
Cable
Interface
Bench Scale Installation Guide
1 2
3 4 5
Knob
U-Braket
T-Adapter
Platform
Column
Indicator U-Bracket
Hardware
Remove
Remove
Tag
Tray
Pull
Lift tray, and remove the four
yellow rubber frame protector tags
Remove
Before Using!!!
Use the 4 screws on the U-bracket to
secure the bracket to the collumn
Install indicator to U bracket with
the 2 steel knobs
Tray
Feet
Level Bubble
Place the tray on the scale frame;
Use level bubble to
level the scale by
adjusting the feet
Washdown Stainless Steel
Bench Scale Installation Guide
5
Knob
U-Bracket
Locate the plate on the underside of
the scale frame. Using the L-wrench
remove the 4 screws and use them
to secure the column in place
Plate
1 2
3 4
  • Page 1 1
  • Page 2 2

Optima Scale Bench User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI