DEITek DTWS700 User manual

Brand: DEITek

Model: DTWS700

Type: User manual

Instructions and Product Manual

Thank you for purchasing a DEITEK Mini Speaker. These instructions will help you pair your new speaker and

enjoy high quality music in no time!

Sections:

 Speaker Parts

 Charging your speaker

 Connecting a Single Speaker

 Connecting Two Speakers for Stereo Sound

 My speaker is not connecting - Troubleshooting

Speaker Parts

1. Power Button

2. USB Power Port

3. LED Indicators

Charging your speaker

Each mini speaker comes with a micro USB charging

cable. Please fully charge your new speaker(s) before the

first use.

1. Insert the micro connector into the speaker's USB

Power Port

and connect the USB plug into any USB

port or USB charger, such as a phone charger.

2. The LED indicator 3 will turn on with a solid light.

3. After charging is completed, the LED indicator will

turn off.

4. When the battery is low you will hear a warning tone, at this time please charge your speaker(s) again.

Tips: If the battery is low but you still need to use the speakers, don't worry! Our mini speakers are designed so

you can keep on listening to your favorite music while charging.

Connecting a Single Speaker

Whether you purchased just a single speaker or you just want to connect one speaker to your device, the

process to pair it is fast and easy.

1. Turn on the speaker by pressing the power

button 1 for 3 seconds. The speaker will give a

sound prompt and LED indicator 3 will flash.

2. Turn on / enable your Bluetooth® on your

device.

3. Look for the device name AK3 and click on

it to pair it. A successful connection will give a sound

prompt.

Once paired the power button 1 when pressed once

it will play/stop music when your device is in music

player mode, it will answer a phone call for incoming

calls, or take a picture when in camera mode.

Connecting Two Speakers for Stereo Sound

If you have purchased two speakers and you want to experience True Stereo Sound, follow these instructions

to pair your new set of speakers to your device:

Turn on the both speakers by pressing the power button

1 for 3 seconds. The speakers will give a sound prompt

and blue indicator will flash.

1. Place each speaker next to each other until you

hear a sound prompt. Once they are connected the

master speaker LED indicator 3 will be blinking while

the slave speaker's LED indicator will have a solid light

on. After the first pairing, the paired speakers will

connect automatically when you turn them both on.

NOTE: Do not pair the speakers to your device until the

speakers are paired with each other. If by mistake you

paired only one speaker to your device follow the

instructions in the troubleshooting section.

2. Turn on / enable your Bluetooth® on your device.

3. Look for the device name AK3 and click on it to pair it. A successful connection will give a sound

prompt.

Once paired the power button 1 when pressed once it will play/stop music when your device is in music

player mode, it will answer a phone call for incoming calls, or take a picture when in camera mode.

Troubleshooting

My speaker is not connecting

I bought two speakers and only one is connecting to the device

In order to get stereo sound you must pair the speakers with each other prior pairing them to your device. If

you paired your speaker to your device prior pairing them to each other, follow these instructions to resolve the

issue:

1. Find the paired speaker AK3 in your device list and remove it. Some devices to remove it you need to

click on the name and selected "Unpair", "Remove", "Forget" or anything similar that will unpair your

device.

2. Turn off both speakers and turn them back on again and place them next to each other until they are

paired as explained on Connecting Two Speakers for Stereo Sound

3. Once they are connected you can pair them to your device again.

4. Note: Don't pair your speakers to your device until they connect to each other. If the speakers don't

connect automatically, turn them off again and turn them back on and press the power button 1 twice

on any of the speakers. This will reset the pairing mode.

Tips: Turning off the MASTER speaker will automatically turn off the Slave speaker. The Master speaker is the

speaker that has the blinking LED indicator 3

If you are still having problems, please call us toll-free at 866-482-8919 so we can assist you.

Wireless Speakers - True Stereo TWS Mini Speaker. Small Size, Big Sound, Amazing Quality!

DEITek DTWS700 User manual

Brand: DEITek

Model: DTWS700

Type: User manual

Download PDF

report

DEITek DTWS700 User manual

DEITek DTWS700 User manual

Other documents