Luxor L100S3, ST-3 User manual

  • Hello! I have reviewed the user manual for the Luxor ST-3 cart. This document provides instructions for assembling the cart, including a parts list and a four-step assembly guide. I'm ready to answer any questions you have about setting up your new cart based on this document.
  • What tools are required for assembly?
    How many steps are involved in the assembly?
    What is included in the parts list?
03/15/13
Parts List Tools Required
- 12˝ or 13mm Wrench
3 Shelf Stainless Steel
Cart Instructions
Place the cart on a level surface and tighten
all of the hardware using the Allen wrench
and a 12˝ or 13mm Wrench.
Thread the adjustment nut K on casters H & J until tight.
Push the plastic bumper G onto frame A, and thread the
casters H & J to frame A. Secure with Wrench.
Using Allen wrench F and a 12˝ or 13mm Wrench,
attach the top shelf to the tube frames with 4 screws
C, 4 corner brackets D and 4 locking nuts E.
Repeat Step 1 for the Middle
and Bottom shelves
1
3
2
4
F x1E x12D x12C x12
A x2 B x3 G x4 H x2 J x2 K x4
A
A
A
G
K
H/J
A
A
BB
B
F
C
D
E
/