LINKLITE Strip Lights User manual

Brand: LINKLITE

Model: Strip Lights

Type: User manual

LINKLITE Strip Lights offer customizable lighting controlled via a smartphone app. The app allows you to select colors, adjust brightness, and sync the lights to music. With simple setup, you can mount the lights on your TV and use voice commands through Alexa for convenient control. These lights are perfect for creating a personalized ambiance in your living room or gaming area.

Download Sma Life App

Sma Life App allows you to control and customize

your controls for Strip Light via your sma device, Search for

the latest version on Apple App store or Google Play.

GET IT ONDownload on the

Strip Lights with HDMI Sync Box

For any product problems or repo an unexpected situation

during use, please contact the Customer Suppo at :

Suppo@ilifa.com

IMPORTANT SAFETY INSTRUCTIONS

12.5(3800mm)/16.4(5000mm)

55-65 inch/75-85inch

HDMI Sync Control Box x1

AC 100-240V DC 12V⎓2.0A

Max 24W

Sma Life

1. Download the “Sma Life” app

from the APP Store or Google

Play.

3. Connect to 2.4GHz Wi-Fi

network and turn Bluetooth

on from you mobile phone.

2. Register an account and allow

the app to use Bluetooth.

"Sma Life" Would Like to

Use Bluetooth

This will allow the app to nd and

connect Bluetooth accessories.

This app may also use Bluetooth

to locate Bluetooth device.

Don't Allow OK

4. Charge and turn on power buon of HDMI control box, the light ash and enter the pairing mode

automatically. Please complete the network arrangement within 10 minutes and the light doesn't

ash. To remove device or reset factory Seings, switch the device on and o for three times

within ve seconds until the light ash again, you can enter the pairing mode.

5. Aer completing the above operation instructions, open the Sma Life APP, "Devices to be

added" will pop up on the Sma Life homepage, click Add Advice, and follow the APP prompts

to complete the subsequent operations.

6. If the home page does not prompt "Devices to be added", you need to manually tap the top

right "+" icon in the top right corner, click Add Advice, and follow the APP prompts to complete

the subsequent operations.

Tips

If you have already downloaded the "Sma Life" App and registered the account, you can skip step1

and step 2.

Please check your current APP version is 4.0.0(20220513162618) or above.

1. Cannot connect to Bluetooth.

2. The Strip Light does not display the full selected color/Some LED beads do not light up.

Troubleshooting

Please contact the suppo team for rapid product replacement.

Clear any obstructions that are between the Strip Light and your smaphone.

Ensure that your smaphone is within 1m/3.28 of the Strip Light when connecting.

Power the Strip Light and your smaphone Bluetooth o then on, then try again.

Your smaphone may be incompatible with the Sma Life app. Try using a dierent

smaphone then reconnect.

Ensure Bluetooth on your smaphone has been turned on.

3. Cannot sync the Strip Light to the beat of my music.

Move the control box closer to the music source.

Clean the mic on the control box then try again.

4. Cannot connect to Wi-Fi.

Do not skip the Wi-Fi connecting steps in the app.

5. Cannot connect to Alexa.

Pull out every connective pa of the Strip Light and rmly re-connect them.

Re-connect your phone to Wi-Fi.

Plug out the adapter po and re-plug it in.

5GHz network is not suppoed. Please set the router to 2.4GHz and then reset it.

Connect your phone to Wi-Fi and check whether the network works well.

Make sure you have entered the correct Wi-Fi name and password.

Change your Wi-Fi password to a brief one. 8 numbers and leers are suggested.

Connect hotspot in your phone to the Strip Light and check whether the router works with

the Strip Light.

FCC Radiation Exposure Statement

Manufacturer: Shenzhen Linklite Sma Lighting Co., Ltd.

Address: 4th oor, 3 building ,Yangbei industrial park 1st phase, Huangtian,

Hangcheng street, Bao'an distr, Shenzhen, Guangdong Province, China

Made in China

This device complies with Pa 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this devicc may not causc harmful inteerence, and (2) this device must accept

any inteerence received, including inteerence that may cause undesired operation.

changes or modications not expressly approved by the pay responsible for compliance

could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Pa 15 of the FCC Rulcs. These limits are

designed to provide reasonable protection against harmful inteerence in a

residential installation. This quipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful inteerence to radio communications. However,

there is no guarante that inteerence will not occur in a paicular installation.

If this equipment does cause harmful inteerence to radio or television reception,

which can be determined by turning the cquipment o and on, the user is

encouraged to try to correct the inteerence by one or more of the following

mcasures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the cquipment and receiver,

- Connect the quipment into an outlet on a circuit different

from that to which the receiver is connected

- Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other

antenna or transmitter

-FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set

forth for an uncontrolled environment . This equipment should be installed and operated with a minumum

distance of 20 cm between the radiator and your body.

LINKLITE Strip Lights User manual

LINKLITE Strip Lights User manual

LINKLITE Strip Lights User manual

Other documents