C2ViSION CAM-FD10 User manual

Brand
C2ViSION
Model
CAM-FD10
Type
User manual

C2ViSION CAM-FD10

Below you will find brief product information for C2ViSION CAM-FD10. This high-level LED brake light camera is designed to provide enhanced visibility and safety while driving. With its 1/3” CMOS image sensor and 700 TV lines, the CAM-FD10 delivers crystal clear video footage, even in low-light conditions. The 120-degree viewing angle ensures a wide field of view, while the IP69K waterproof rating guarantees reliable performance in all weather conditions.

Furthermore, the CAM-FD10 is equipped with infrared LEDs for improved night vision, making it an ideal choice for reversing or driving in poorly lit areas. The camera's sleek design seamlessly integrates with the vehicle's brake light, maintaining the vehicle's aesthetics while providing additional functionality.

C2ViSION CAM-FD10

Below you will find brief product information for C2ViSION CAM-FD10. This high-level LED brake light camera is designed to provide enhanced visibility and safety while driving. With its 1/3” CMOS image sensor and 700 TV lines, the CAM-FD10 delivers crystal clear video footage, even in low-light conditions. The 120-degree viewing angle ensures a wide field of view, while the IP69K waterproof rating guarantees reliable performance in all weather conditions.

Furthermore, the CAM-FD10 is equipped with infrared LEDs for improved night vision, making it an ideal choice for reversing or driving in poorly lit areas. The camera's sleek design seamlessly integrates with the vehicle's brake light, maintaining the vehicle's aesthetics while providing additional functionality.

www.c2vision-eu.com
Image Sensor: 1/3” CMOS
TV Lines: 700
Resolution: 500 x 582
Minimum Illumination: 0 Lux
TV System: PAL
Waterproof Rating: IP69K
Viewing Angle: 120 Degrees
Infra-Red LED’s: Yes
Enhanced Performance In Low Light: Yes
Current Consumption: 45-141mA @ 13.8V
Operating Voltage: 12V DC (Negative Ground)
Operating Temperature: -40 Degrees C to +80 Degrees C
User Manual
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Connects2, try to provide as
much Information as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
High Level LED Brake Light Camera
Ford Transit Custom (Euro6) 2016>
PRODUCT FEATURES:
DISCLAIMER:
CAM-FD10
2
Connects2Vision
www.c2vision-eu.com
CONTENTS
• Camera with 35cm cable to Male 4pin camera connector
• 10m Female 4pin to Video RCA and +/- 12V DC power extension cable
• Instructions
INSTALLATION
1. Remove the factory installed third brake light from the vehicle and unplug
the connection cable.
2. Connect the new combined brake light/camera assembly to the brake light
connector and test to ensure correct brake light operation.
3. Connect the xed camera cable coming from the new assembly to the
connection provided on the extension cable and t the light/camera to the
vehicle in place of the factory light that you have removed, taking care not to
trap any of the cables.
4. Connect the Black wire to a suitable ground and connect the Red wire to
the reversing light circuit or an interface which provides a reverse signal.
5. Connect the extension cable to the display screen and ensure that the
image is displayed correctly.
Subscribe to our YouTube Channel for installation
guides and tips... www.youtube.com/connects2
  • Page 1 1
  • Page 2 2

C2ViSION CAM-FD10 User manual

Brand
C2ViSION
Model
CAM-FD10
Type
User manual

C2ViSION CAM-FD10

Below you will find brief product information for C2ViSION CAM-FD10. This high-level LED brake light camera is designed to provide enhanced visibility and safety while driving. With its 1/3” CMOS image sensor and 700 TV lines, the CAM-FD10 delivers crystal clear video footage, even in low-light conditions. The 120-degree viewing angle ensures a wide field of view, while the IP69K waterproof rating guarantees reliable performance in all weather conditions.

Furthermore, the CAM-FD10 is equipped with infrared LEDs for improved night vision, making it an ideal choice for reversing or driving in poorly lit areas. The camera's sleek design seamlessly integrates with the vehicle's brake light, maintaining the vehicle's aesthetics while providing additional functionality.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents