2. Premier
  3. PBTEB04WH
PBTEB04WH

Premier PBTEB04WH User manual

  • Hello! I am an AI chatbot trained to assist you with the Premier PBTEB04WH User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Features
Consists of 2 units which can be used as a stand alone device
or as a full stereo earbud buy using the second earbud unit.
Pairing the earbuds with your
device
Earbuds power on automatically when removed from
charging case.
Earbuds turn o and begin to charge automatically when
inserted into charging case.
Touch Control
Tech Support Visit www.PremierAccessoryGroup.com or call 1-866-446-4327 Toll Free.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
PLACE INTO CHARGING CASE CHARGING (RED LIGHT) FULLY CHARGED (BLUE LIGHT )
MODEL: PBTEB04WH
©2020 Premier Package graphics and other marks are trademarks of Premier Accessory Group, LLC. All brand, product
names and logos are trademarks or registered trademarks of their respective companies.
Android is a trademark of Google inc. Use of this trademark is subject to Google Permissions. The manufacturers & models
The Bluetooth word mark and logo are registered trademarks and are owned by the Bluetooth SIG, Inc.
ON OFF
1.Take out earphones from the charging box, the two
earbuds will turn on and be connected automatically
blue , the earbuds are now in pairing mode.
2. Open Bluetooth settings on your device
3. Select “Wireless Earbuds Pro”
If earbuds are not paired with
each other Charging the earbuds
1. Put both earbuds into the charging case (make sure
the earbuds are not connected to the phone or
other device).
2. Take the earbuds out of the charging case, both
earbuds will turn on automatically with a prompt
sound and will automatically be connected. (If you
do not hear the prompt sound, please repeat the
above action).
Press on one earbud to activate the virtual assistant (SIRI or
Google) on your phone
Press twice on the right earbud to switch to next song.
Press twice on the left earbud to switch to previous song.
Press three times on the right earbud to turn up the volume.
Press three times on the left earbud to turn down the volume.
Press either earbud to play/pause and answer/hang up the
phone.
Long press the button for 2 seconds to reject the call.
Long press the button for 3 seconds to turn it on, and long
Put the earbuds into the charging case and close it completely.
The red light of the earbuds will light, and the earbuds will start
charged.
Charging the charging case
Insert the charging cable into the USB port to recharge the
charging case. When the charging case is charging, the red
Made in China for: Premier Accessory Group, LLC - 21 Commerce Drive. Cranbury, N.J. 08512
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits for a class B
digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The devicecan
be used in portable exposure condition without restriction.
/