2. Balt
  3. 34729

Balt 34729, BLT-34729 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Balt BLT-34729 Butterfly Chair. This document provides a detailed guide on assembling the chair, including attaching the casters, seat, arms, back assembly, and headrest. I'm ready to answer your questions about the assembly process or specific components of the chair.
  • How many casters are included?
    What tool is needed for assembly?
    How many Back Bolts (P8a) are included?
1
Parts/Hardware
BLT-34729 Butterfly Chair
Assembly Instructions
P1 Cylinder 1 EA
P2
P6a
P6b
Base 1 EA
P3 Caster 5 EA
P4 Seat 1 EA
P5a
P5b
P7
P8a
P8b
P9
P10 Head Rest 1 EA
Back Assembly 1 EA
Allen Wrench 1 EA
Left Arm 1 EA
Right Arm 1 EA
Missing Parts or UPS Damaged Parts
For Your Convenience you can
EMAIL us at
[email protected]
24HOURS 7 DAYS A WEEK
Arm Bolt 4 EA
Arm Lock Washer 4 EA
Back Bolt 3 EA
Back Lock Washer 3 EA
2
1.) Push in five Casters (P3) into the Base (P2).
Insert the Cylinder (P1) into the Base (P2).
P1
P2
P3
2.) Place the Seat (P4) on the top of the
Cylinder (P1).
P4
P1
3.)Attach the Left Arm (P5a) to the Seat (P4) using
two Arm Bolts(P6a) and two Arm Lock Washers
(P6b). Attach the Right Arm (P5b) to the Seat (P4)
using two Arm Bolts (P6a) and two Arm Lock
Washers (P6b). Tighten with Allen Wrench (P7).
P6a
P6b
P6a
P6b
P4
P5a P5b
4.) Slide the Back Assembly (P9) into the rear of
the Seat (P4) and secure with three Back Bolts
(P8a) and three Back Lock Washers (P8b).
Tighten with Allen Wrench (P7).
P4
P9
P7
P8a
P8b
34729_2-14-12
5.) Insert the Head Rest (P10) into the top of
Back Assembly (P9).
P10
P9
/