Bolt 7032303 Installation guide

Hello! I have reviewed the instructions for the JT Grille Template. This document details how to properly cut the grille using the provided template for hood lock installation. I'm ready to answer your questions about it.
What is the purpose of this template?

How do I use the template?

What should the grille look like after using the template?

JT HOOD LOCK

GRILLE TEMPLATE

POUR INSTRUCTIONS EN FRANÇAIS, VISITEZ

HTTP://WWW.BOLTLOCK.COM/ABOUT-STRATTEC/BOLT-LITERATURE

FOR SPANISH AND FRENCH TRANSLATIONS GO TO:

HTTP://WWW.BOLTLOCK.COM/ABOUT-STRATTEC/BOLT-LITERATURE

ENCUENTRA INSTRUCCIONES DE ENSAMPLE EN ESPAÑOL EN EL WEBSITE:

HTTP://WWW.BOLTLOCK.COM/ABOUT-STRATTEC/BOLT-LITERATURE

Print and cut out template then apply to the

back of Grille insert. Using the red line as a

guide cut/remove Grille material.

Cut out template and tape to the

inside surface of the JT Grille

Using the template as a guide

cut the Grille along the red line

The JT Grille should like this prior

installing the Hood Lock

/

Other documents