Maxon Pressure Blowers CBL & SC Operating instructions

Maxon
Brand
Maxon
Model
Pressure Blowers CBL & SC
Type
Operating instructions
m
CORPORATION
MUNCIE, INDIANA, USA
INDUSTRIAL COMBUSTION EQUIPMENT AND VALVES
Maxon practices a policy of continuous product improvement. It reserves the right to alter specifications without prior notice.
Series CBL & SC Pressure Blowers Page 9200-S-1
5/98
Installation/Maintenance Hints
Installation Hints
– Provide a blower location without high ambient
temperatures and with a clean unrestricted air
supply to the inlet.
– Rotate blower case if necessary to avoid piping
interference and provide adequate support for all
air piping.
– Consider pressure drops carefully in selecting
downstream pipe size, avoiding bends, turns and
bull head tees wherever possible.
– Check that wiring follows all normal codes and
standard electrical practices.
Maintenance Hints
– Protect blower from possible mechanical damage.
– Establish a maintenance schedule that includes
periodic inspection for dirt build-up which can
reduce air flows. If necessary, remove
accumulations before performance is affected.
– Clean and change filters (if used) before
performance deteriorates and in accordance with
the procedures outlined below.
IMPORTANT:
KEEP FILTER CLEAN for optimum system
performance.
Choose from the following cleaning methods
(based on manufacturers recommendations) the
one which fits your needs, then perform it on a
regularly scheduled basis.
1.Vacuum to remove dry accumulations.
2.Remove element, wash like toweling, wring
gently and dry quickly.
3.Immerse in hot water and detergent if necessary
to remove oil and dirt, then rinse thoroughly,
wring gently and dry quickly.
  • Page 1 1

Maxon Pressure Blowers CBL & SC Operating instructions

Maxon
Brand
Maxon
Model
Pressure Blowers CBL & SC
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents