ANKO 43155330 User manual

Type
User manual
Instruction manual
Keycode: 43155330
Laptop Stand with Fans RGB
To ensure optimum performance and safety, please read this instructions carefully before operating this product.
Weight capacity: 6.9kg
Operation
1. Take out the cooler from the packaging.
2. Find the small pad at the bottom of the product.
3. Take it out and turn the cooler to the front side.
4. Find 2 small holes around the LCD display control panel.
5. Insert the pad into holes.
6. Pull out the brackets at back and choose the angle you need from 7 adjustments.
7. Put your laptop (Not included) on the cooler.
8. Insert one of the cable USB connector into the laptop’s USB port, and connect the other end of USB cable into the
coolers USB port, press the power button then the cooling fans will start to work.
9. Press light button on LCD display control panel to change 10 kinds of light modes.
10. Press +/- button to increase/decrease fan speed.
  • Page 1 1
  • Page 2 2
  • Page 3 3

ANKO 43155330 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI