Vollrath VOL-6004 User manual

Category
Slicers
Type
User manual

Vollrath VOL-6004 is a manual food processor designed to shred, string, “krinkle cut”, julienne, grate, and slice fruits, vegetables, cheese, and other food products. It features various cone blades for different cutting styles, a hopper for holding the food, a handle for rotating the cone blade, a clamp base for securing to a table or bench, or a suction base for securing to a flat surface. The VOL-6004 is easy to use and clean, making it a versatile and efficient tool for food preparation tasks.

Vollrath VOL-6004 is a manual food processor designed to shred, string, “krinkle cut”, julienne, grate, and slice fruits, vegetables, cheese, and other food products. It features various cone blades for different cutting styles, a hopper for holding the food, a handle for rotating the cone blade, a clamp base for securing to a table or bench, or a suction base for securing to a flat surface. The VOL-6004 is easy to use and clean, making it a versatile and efficient tool for food preparation tasks.

ENGLISH
Item No. 2350021-1 Rev 6/10
ENGLISH
Operators Manual
King KutterTM
Thank you for purchasing this Vollrath Food Processing Equipment. Before operating the equipment, read and familiarize yourself with
the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and
packaging. Use this packaging to ship the equipment if repairs are needed.
Manual Food Processing equiPMent
OperatOrs Manual
2
Features and Controls
A
D
C
E
B
F
Figure 1. Features and Controls Clamp Base Model.
A
D
C
G
F
H
B
Figure 2. Features and Controls Suction Base.
A COVER. Used to push and hold the food product against blade.
B HOPPER. Used to hold the food product being processed.
C CONE BLADE. Cuts, slices, grinds or shreds the food product.
D HANDLE. When turned it rotates the cone blade.
F PIN. Holds the cover in place.
E CLAMP BASE. Used to hold unit to the edge of a table or bench.
G SUCTION BASE. Used to hold the unit to a at smooth work
surface.
H SUCTION LEVER. Used to create suction to secure base to work
surface and used to release suction from work surface.
saFety PreCautions
To ensure safe operation, read the following statements and understand
their meaning. This manual contains safety precautions which are
explained below. Please read carefully.
WARNING
Warning is used to indicate the presence of a hazard that can cause
severe personal injury, death, or substantial property damage if the
warning is ignored.
CAUTION
Caution is used to indicate the presence of a hazard that will or can
cause minor personal injury or property damage if the caution is
ignored.
NOTE
Note is used to notify people of installation, operation, or maintenance
information that is important but not hazard-related.
For Your Safety!
These precautions should be followed at all times. Failure to follow
these precautions could result in injury to yourself and others or
damage the equipment.
To reduce risk of injury or damage to the unit:
Check unit before each use to insure the equipment is clean.
Do not leave cutting cones in water. Wash cutting cones in hot water
immediately after use and allow to air dry. Do not stack cones together
when wet.
Do not immerse the hopper in water as it will destroy the oil in the sealed
bearing.
Check for broken, nicked or dull blades and if found, replace blade
assembly.
FunCtion and PurPose
Intended to shred, string, “krinkle cut”, julienne, grate and slice fruits vegetables,
cheese and other food products.
Manual Food Processing equiPMent
3
ENGLISH
OperatOrs Manual
Figure 7. Cone Blade Number 5, Krinkle Cut.
oPeration
WARNING
Sharp Blade Hazard.
Blades are sharp and can cause cuts. To avoid
injury from sharp blades, handle with caution.
Prior to rst use, it is important to clean the unit. Wash new blades and unit
with warm soapy water and rinse thoroughly to remove the thin protective oil
lm. Allow unit and blades to air dry.
1. Securing the base to the work surface:
Clamp base models. Slide the clamp base (E) over the edge of a table
or counter edge. Turn the clamp (not shown) to rmly tighten to the base.
See Figure 1.
Suction base models. Position the suction base (G) on the clean, at
and smooth surface of the table or counter. Lift the lever (H) up and
down on the other side to secure the base rmly to the work surface.
See Figure 2.
2. Slid the hopper (B) onto the base. See Figures 1 and 2.
3. Select the desired cone blade. See Figures 3, 4, 5, 6 and 7.
4. Place the hole in the center of the cone blade (C) onto the center pin
of the unit. Hold the handle (D) and rotate the cone blade clockwise to
secure the cone blade to the lugs on the unit. See Figures 1 and 2.
5. Place a container under the cone blade (C).
6. Lift the cover (A) and place food product into the hopper (B). Lower cover
(A) onto food product.
NOTE:
Do not allow the cover to ride on the cone blades as this
could cause metal scraping to mix with the food products.
7. Rotate the handle (D) and process the food. Repeat steps 5 and 6 as
necessary. It may be necessary to hold pressure on the cover down
while processing the food.
8. Remove the cone blade (C) by holding the handle (D) and rotating the
cone blade (C) counter clockwise.
9. Clean unit as directed in the CLEANING Section of this manual.
Figure 3. Cone Blade Number 1, Shredder.
Figure 4. Cone Blade Number 2, String.
Figure 5. Cone Blade Number 3, French Fry Cut.
Figure 6. Cone Blade Number 4, Thin Slice.
Manual Food Processing equiPMent
OperatOrs Manual
4
1. Remove the cone blade (C) by holding the handle (D) and rotating the
cone blade (C) counter clockwise.
2. Remove the pin (F) and cover (A).
3. Remove hopper (B) from base (E or G).
4. Wash parts in warm soapy water.
5. Rinse thoroughly and let parts and cone blades air dry.
6. Occasionally clean the suction base (G) with warm soapy water and
allow to air dry.
7. Do not submerse hopper (B) in water as it will damage the bearing.
8. Do not put this machine in a dishwasher or dish machine with soaps,
detergents, or other alkaline chemicals that can harm the machine.
Cleaning
WARNING
Sharp Blade Hazard.
Blades are sharp and can cause cuts. To avoid
injury from sharp blades, handle with caution.
To maintain the appearance and increase the service life, clean your daily.
NOTE:
Food acids will make blades dull and corrode the metal.
Always clean this food preparation machine immediately
after every use.
serviCe and rePair
Please contact the qualied professional repair service listed below.
VOLLRATH Induction Repair Service • 1-800-825-6036 (USA) or www.vollrathco.com
When contacting the Authorized Professional Service Center, please be ready with the model number, serial number, and proof of purchase showing the date
the unit was purchased.
sPare Parts list - King KutterTM
LETTER PART NUMBER DESCRIPTION
A 6025 Handle Assembly
B 6027 Suction Base
C 6028 Hopper Assembly W/Bearing (Includes Reference Letters A and D)
D 6029 Clutch Assembly
E 6031 Pin (Cover)
F 6032 Cover
G 6011 Cone Blade, Number 1, Shredder
H 6012 Cone Blade, Number 2, String
I 6013 Cone Blade, Number 3, French Fry Cut
J 6014 Cone Blade, Number 4, Thin Slice
K 6015 Cone Blade, Number 5, Krinkle Cut
M 6026 Clamp Base
Manual Food Processing equiPMent
5
ENGLISH
OperatOrs Manual
eXPloded vieW - King KutterTM
Manual Food Processing equiPMent
OperatOrs Manual
6
Warranty statement For the vollrath Co. l.l.C.
The Vollrath Company LLC warrants the products it manufactures and distributes against defects in materials and workmanship for a period of one year, except as specically
provided below. The warranty runs 12 months from the date of original installation. (End user receipt)
1. Refrigeration compressors – The warranty period is 5 years.
2. Replacement parts – The warranty period is 90 days.
3. Fry pans and coated cookware – The warranty period is 90 days
4. EverTite™ Riveting System – The warranty covers loose rivets
only, forever.
5. Cayenne® Heat Strips – The warranty period is 1 year plus an
additional 1 year period on heating element parts only.
6. Ultra and Professional Induction Ranges – The warranty period
is 2 years.
7. Mirage and Commercial Induction ranges - The warranty period
is 1 year.
8. ServeWell® Induction Workstations – The warranty period is one
year on the workstation table and 2 years on induction hobs.
9. Slicers – The warranty period is 10 years on gears and 5 years
on belts.
10. Mixers – The warranty period is 2 years.
11. Extended warranties are available at the time of sale.
12. Boxer Mixers – 1 Year exchange Warranty.
13. Vollrath – Redco products – The warranty period is 2 years.
14. Optio / Arkadia product lines – The warranty period is 90 days.
15. All non-stick products (i.e. fry pans and surfaces) are 90 days for
the non stick surfaces.
All products in the Jacob’s Pride® collection, including
the following, have a lifetime warranty:
NSF Certied One-Piece Dishers
NSF Certied Spoodle® Utensils
NSF Certied Heavy-Duty Spoons with Ergo-
nomic Handle
NSF Certied Heavy-Duty Basting Spoons
Heavy duty Turners with Ergonomic handle
One-Piece Tongs*
Heavy-Duty One-Piece Ladles*
Nylon Handle Whips
One-Piece Skimmers
Tribute®, Intrigue®, and Classic Select® Cook-
ware*
*Jacob’s Pride® warranty does not cover Kool-Touch®,
non stick coatings and silicone handles.
Items sold having no warranty:
Meat Grinder Knives
Light Bulbs in Convection Ovens and Hot Food
Merchandiser
Oven Door Seals
Oven Door Glass
Hot Food Merchandisers / Display Case Glass
Calibration and set up of gas equipment
Slicer / Dicer blades (table top food prep) –
Redco and Vollrath
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
As The Vollrath Company LLC’s only responsibility and the purchaser’s only remedy, for any breach of warranty, The Vollrath Company LLC will repair or, at its option, replace the
defective product or part without charge, except as otherwise provided below:
For refrigeration compressors and the second year of the warranty on Cayenne® Heat Strips and mixers, The Vollrath Company LLC will provide the repaired
or replacement part only; and the buyer will be responsible for all labor charges incurred in performing the repair or replacement.
To obtain warranty service, the buyer will be responsible to return to The Vollrath Company LLC any product (other than gas equipment that is permanently
installed) weighing less than 110 lbs. or located outside of a 50-mile radius of a certied technician designated by The Vollrath Company LLC to perform
warranty repairs. If a Vollrath Technician cannot be contacted check the website for service contact points. (Please refer to the Product Catalogue for weights
and sizes of product)
No remedy will be available for products that have been damaged by accident, carelessness, improper installation, lack of proper setup or supervision when
required, neglect, improper use, installation or operation contrary to installation and operating instructions or other causes not arising out of defects in materi-
als or workmanship. At the buyer’s request, The Vollrath Company LLC will repair and or replace such products at a reasonable cost.
No remedy will be available for slicers where blade has not been sharpened (Refer to owner’s manual for sharpening instructions)
No remedy will be available for mixers damaged by changing gears while unit is running or overloading, in either case as determined by a Vollrath Certied
Technician
Warranty work must be authorized in advance by The Vollrath Company LLC. See the operating and safety instructions for each product for detailed war-
ranty claim procedures.
No remedy will be available for product returned and found to be acceptable to the product specication.
No remedy will be available under any warranty not registered as required below.
LIMITATION OF LIABILITY:
THE VOLLRATH COMPANY LLC SHALL HAVE NO LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND,
WHETHER BASED UPON NEGLIGENCE OR OTHER TORT, BREACH OF WARRANTY, OR ANY OTHER THEORY.
Manual Food Processing equiPMent
7
ENGLISH
OperatOrs Manual
Warranty Procedure
On all warranty calls, the following process and information is required:
All warranty claims will start with a call to Vollrath Technical Service support line.(800-628-0832).
A technical support professional will work to diagnose the issues, and provide the details for the service solution.
Name and phone number of person calling
Business name, street address, city, state and zip
Model and serial number
Date of purchase and proof of purchase (Receipt)
Name of dealer where unit was purchased
NOTE: Vollrath will not accept products sent without the proper procedure being followed.
Important:
TO MAKE A CLAIM FOR ANY REMEDY UNDER THIS WARRANTY, YOU MUST REGISTER YOUR WARRANTY.
register today
ONLINE: Register your warranty on-line now at www.Vollrathco.com
NO WEB ACCESS: If you do not have access to the web, kindly register by completing the warranty registration form and faxing it to The Vollrath Co. LLC ofce in the country of
purchase.
ProduCt registration
Business naMe
Key contact naMe eMail
street address
city state ZiP code
country Phone Fax
Model iteM nuMBer
serial nuMBer - -
oPeration tyPe
RLimited Service Restaurant RFull Service Restaurant RBars and Taverns RSupermarket
RConvenience Store RRecreation RHotel/Lodging RAirlines
RBusiness/Industry RPrimary/Secondary School RColleges/University RHospitals
RLong-Term Care RSenior Living RMilitary RCorrections
reason For selecting our Product
RAppearance RFull Service Restaurant RAvailability RSellers Recommendation
REase of Operation RVersatility of Use RPrice RBrand
Would you liKe to receive our Full-line catalog and reMain on our Mailing list? RYes R No
www.vollrathco.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201
U.S.A.
Main Tel: 800.628.0830
Fax: 800.752.5620
Technical Services: 800.628.0832
Service Fax: 920.459.5462
Canada Service: 800.695.8560
© 2010 The Vollrath Company, L.L.C.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Vollrath VOL-6004 User manual

Category
Slicers
Type
User manual

Vollrath VOL-6004 is a manual food processor designed to shred, string, “krinkle cut”, julienne, grate, and slice fruits, vegetables, cheese, and other food products. It features various cone blades for different cutting styles, a hopper for holding the food, a handle for rotating the cone blade, a clamp base for securing to a table or bench, or a suction base for securing to a flat surface. The VOL-6004 is easy to use and clean, making it a versatile and efficient tool for food preparation tasks.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI