ANKO 43276844 User manual

RAINBOW NEON LIGHT

Contents:

Rainbow Light X1

Base X 1

Instructions

Step 1. Install batteries (not supplied) before use, ensuring that the polarisation on the

batteries is correct.

Step 2. Place the Rainbow light on the base as shown in the image below.

Step 3.

Turn on/off the light switch to operate.

Warnings:

Battery information: Require 3 x 1.5V AA batteries (not included)

BATTERY INSTALLATION BY ADULT IS REQUIRED

OPERATING AND CARE INSTRUCTIONS

-INDOOR USE ONLY

-NEVER MIX DIFFERENT TYPES OR OLD AND NEW BATTERIES

-DO NOT SHORT CIRCUIT SUPPLY TERMINALS OR DISPOSE OF BATTERIES IN FIRE

-REMOVE BATTERIES DURING LONG PERIOD OF NON-USE

-BATTERIES ARE TO BE INSERTED WITH THE CORRECT POLARITY (+ AND -).

Instructions:

 Please read this product manual carefully.

 Read all warnings and follow all instructions in this product manual.

 Use only a microfiber and dry cloth for cleaning the product,

 Operate carefully to not cause any damage by dropping or physical shocking it

 Do not leave the product in excessive heat, high temperatures can cause the product to

malfunction.

 The light source of this luminaire is not replaceable.