Taramps 6×9″ FH 80D User manual

Type
User manual
Thiele-Small parameters are obtained after applying a sinusoidal level of 50hz for a period of 30 minutes.
A tolerance of + - 15% on the specified values is allowed.
RMS POWER
MUSICAL PROGRAM POWER
NOMINAL IMPEDANCE
RESISTANCE (RE)
NO (EFFICIENCY REFERENCE)
SENSITIVITY (@ 1W, 1 m)-Free-Air
DIAPHRAGM MASS (MMD)
TOTAL MASS (MMS)
BL PRODUCTO
MECHANICAL Q (Qms)
ELECTRIC Q (Qes)
TOTAL Q (Qts)
COMPLIANCE (CMS)
EQUIVALENT VOLUME (VAS)
FREQUENCY RESPONSE
RESONANCE FREQUENCY
Le @ 10 kHz (coil inductance at 10kHz)
EFFECTIVE CONE AREA (SD)
CONE EXCURSION WITHOUT DISTORTION (X MAX)
FLOW DENSITY IN THE GAP
40 W
80 W
4 ou 8 Ohms
3,0 / 6,3 ohms/VCC
0,789%
90,990 dB
12,00 g
14,108 g
3.880 TM
3,525
1,619
1,109
213,819u M/N
17,168 L
65Hz à 16.000Hz
91,635 Hz
0,2008 mH
0,0237 Sq.m
+- 2,05 mm
10.000 GAUSS
ELECTRICAL PARAMETERS
NOMINAL DIAMETER
FERRITE MEASURES
COIL DIAMETER
COIL HEIGHT
COIL WIRE MATERIAL
COIL WIRE SECTION
COIL SHAPE
GAP HEIGHT
HOUSING MATERIAL
FERRITE MATERIAL
WEIGHT
VOLUME OCUPPIED ON THE CABINET
6X9 Inches
90 X 39 X 14mm
1. 1/4 Inches
6,5 mm
Copper
Round
*Kapton
4,75 mm
Steel
Barium
1,10 Kg
1,08 Liters
MECHANICAL PARAMETERS
CABINET SUGGESTIONS
VOLUME
LITERS
20 02 3"(POL) 50,0 mm 100 Hz 90 Hz - 24 dB/ Octave
- 24 dB/ Octave
02 3"(POL) 69,0 mm 90 Hz 80 Hz
QUANT. DIAM. DEPTH. (ACTIVE)
DUCTS DUCTS DUCTS SYNTONY (H.P.F) ATTENUATION
25
VENTED
BOX
MODEL
Box 25 litersBox 20 liters
20 Hz
Normalized Amplitude Response (dB-SPL/Hz)
dB
6
0
-6
-12
-18
-24
-30
-36
50 100 500 1 K 5 K 10 K 20 K
Ohm Impedance vs Freq
Response curve obtained in a 25L x 70Hz box
(1W x 1m).
90,00 mm
77,5 mm
236,70 mm
218,70 mm
236,70
165,00mm
PRODUCT DIMENSIONS
Rod. Julio Budisk SP 501 s/n, - Compl. KM 30-A /SP ZIP:19.180-000 Phone Number +55 (18) 3266-4050 National Registry(CNPJ): 23.372.795/0001-64
Note: Features, specifications and aesthetics are subject to change without notice.
www.taramps.com.br
The FH 80D was carefully designed to work with a wide response, adapng to the most varied types sound systems,
standing out in the mid-bass to the high frequencies with excellent acousc performance, using components such as a
cellulose cone whizzer that contributes to this product reaching an excellent result, that is, a frequency response from 65hz
to 17.000hz. Live a new experience listening to your playlist with a fidelity that will amaze your ears.
FH 80D
ENGLISH
ENGLISH
WARRANTY TERM
ŸTaramps guarantees its products against any defect in material or manufacturing process, provided that, at the
discretion of its authorized technicians, it is found to be defective under normal conditions of use.
Transport
ŸTo use the warranty, the customer must present the invoice and the warranty term, both of which must contain the serial
number on the product label.
Only products that fall under the terms of warranty coverage will have their transportation expenses covered, otherwise,
the expense will be at the customer's expense.
ŸExceed the period of 15 (fifteen) months.
The product must be installed correctly, by a specialized professional, as well as respecting the product characteristics.
Warranty Coverage:
The product has a warranty of 15 (fifteen) months after the issuance of the invoice, with the legal warranty of 90 days,
provided for in article 26, item ll, of law No. 8078/90 ( Brazilian consumer protection code).
ŸMalfunctions in product parts (torn cone/dust cap, bent or broken speaker housing).
ŸThe PRODUCT must contain the original label, on which its serial number is inserted.
ŸDamages incurred are caused by; transport or handling accident, or humidity.
ŸCoils burned out by excessive power or extreme distortion conditions, causing heating above 240º.
When all our products are produced, they undergo rigorous evaluations, in each construction process until they are
packaged, however, if any type of abnormality is detected, when opening the package, it must be sent to one of our
authorized service stations , or directly to the factory, if there is not an authorized technitian in your region. Each and every
product must undergo a technical evaluation so that the defect is identified and proven.
Warranty Conditions:
ŸDefects caused by improper installation.
The customer will NOT have the warranty when:
INVOICE NUMBER
ZIP:
ZIP:
FHONE:
PHONE:
WARRANTY CERTIFICATE
NAME:
ADDRESS:
ADDRESS:
DEALER:
CITY:
CITY:
STATE:
STATE:
  • Page 1 1
  • Page 2 2

Taramps 6×9″ FH 80D User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI