2. aosbath
  3. DAE3j0GdJ4w
DAE3j0GdJ4w

aosbath DAE3j0GdJ4w User manual

  • Hello! I've reviewed the user manual for the AOSmith HPW Heat Pump Water Heater. This manual outlines how to use the device, including its efficiency and hybrid modes, temperature settings, and features like the AES and MAX functions. I'm ready to answer any questions you have about this product.
  • Can I leave the heat pump on all day?
    When should I turn off the heat pump?
    How long does it take for a heat pump to heat up?
    When should I use the instant function?
Heat pump (210W)
Heat pump (210W) +
Electric (3000W)
Mode selection
MAX
Unlike regular water heaters which must be switched off after use, you can leave the heat pump on the whole day in efficiency mode. It is a fully automated
system which will go into energy saving mode when not in use.
Turn off the heat pump when you are going on vacation for more than 3 days.
A heat pump takes longer to heat up than a regular heater (2.5 hours), but consumes much less energy overall.
Heat pumps work as long as the ambient temperature does not drop below 15°C.
How to Use the Heat Pump
YOUR HEAT PUMP WATER HEATER (HPW)
Displays actual average
temperature in tank
Actual temperature
Monitors up to 21 days
of dynamic operation
AES
Efficiency mode
Hybrid Turbo mode
Toggle between
‘Efficiency’ or ‘Hybrid
Turbo’ mode.
When regular demand
increases over 50%, use
MAX (Electric mode)
Use this to activate
or deactivate AES or
MAX
AES, MAX selection
Watch video at
www.aosbath.com/clock
Set timers
use to increase and
decrease setting
temperature
Up and down keys
Use 'instant' when all indication
bars are green if you want hot
water fast. (3000W mode)
Instant function
On/off
Red: hot
Yellow: warm
Green: cold
Temperature indicator
Temp range: 35 - 75°C
Ideal temperature: 50°C
Set temperature
Lights up when system
is actively heating.
Indicator lamp
If you have any questions, call 6842 0900 or email [email protected]
38 50
/