BWI Eagle 49-1201, 49-1103, 49-5004-X Operating instructions

  • Hello! I've reviewed the provided Product Information Bulletin for the BWI Eagle Rubber Duck Antenna (models 49-1103 and 49-1201) and the Antenna Extender (model 49-5004-X-ISO). I understand that this document outlines the features of these products, their connectivity options and usage in conjunction with Air-Eagle control units and metal control cabinets. I'm ready to answer any specific questions you might have about these products.
  • What is the "Rubber Duck Antenna"?
    How does the Rubber Duck Antenna connect to the control unit?
    Can the antenna be used with a metal control cabinet?
    What lengths are available for the Antenna Extender?
PRODUCT INFORMATION
BULLETIN
105 Bonnie Drive
Butler, PA 16002
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
RUBBER DUCK ANTENNA
900MHz - 2.4GHz
MODEL 49-1103 900MHz
MODEL 49-1201 2.4GHz
DESCRIPTION
A TNC Portable Antenna, aka “Rubber Duck Antenna” is supplied
with all Air-Eagle 900MHz and 2.4GHz mountable control units.
This antenna connects directly to the control unit by TNC
connector. The antenna should never be blocked by metal.
Should the control unit need to be housed in a metal control
cabinet, the Rubber Duck Antenna can be mounted up to 7 feet
away by use of a coax cable supplied by BWI Eagle.
ANTENNA EXTENDER
MODEL 49-5004-X-ISO
DESCRIPTION
A TNC Male to TNC Bulkhead cable assembly used to
provide an external mount on a control cabinet for the
supplied rubber duck antenna. Available lengths:
Part Number
Length
49-5004-2-ISO
2 Foot
49-5004-4-ISO
4 Foot
49-5004-7-ISO
7 Foot
Note If an extension longer than 7 foot is needed, the
rubber duck antenna must be replaced by an external high
gain antenna which can connect to either the TNC Male to
TNC Bulkhead or directly to the control unit.
/