2. Optimus
  3. BS-20BA
BS-20BA

Optimus BS-20BA, BS-20WA User manual

  • Hello! I am an AI chatbot trained to assist you with the Optimus BS-20BA User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the difference between the Optimus BS-20BA and BS-20WA models?
    What are the power handling capabilities of the Optimus BS-20WA speaker?
    What impedance options does the Optimus BS-20WA speaker offer?
    What is the sensitivity rating of the Optimus BS-20WA speaker?
    What is the frequency response range of the Optimus BS-20WA speaker?
    What mounting options come with the Optimus BS-20WA speaker?
    How do I select the appropriate power tap for the Optimus BS-20WA speaker?
MANUAL DE INSTRUCCIONES
BS-20BA / BS-20WA Versión 1.0 1/1
BS-20BA / BS-20WA
A
TENCION:
⋅ La instalación debe ser realizada por personal técnico
cualificado.
⋅ Conectar en paralelo los altavoces a los terminales de
salida correspondientes del amplificador.
⋅ Asegurarse de que todos los altavoces tengan la
misma polaridad.
⋅ No cambiar la toma del transformador mientras el
altavoz está en funcionamiento.
⋅ No exponer el equipo a fuentes de calor, ni a la llama.
CAJA ACÚSTICA
CARACTERISTICAS
Modelo BS-20BA BS-20WA
Altavoz
Graves: 4”
Agudos: Tweeter de 1”
Potencia RMS 20 W
Selección de potencia 100 V 20 W, 10 W, 5 W y 2’5 W
Selección de potencia 70 V 20 W, 10 W, 5 W, 2’5 W y 1’25 W
Impedancia
250 Ω, 500 Ω, 1 kΩ, 2 kΩ, 4 kΩ y 8 Ω
Sensibilidad 89 dB SPL a 1 W, 1 m y 1 kHz
Presión acústica 102 dB SPL a 20 W, 1 m y 1 kHz
Respuesta en frecuencia 100 ~ 20.000 Hz
Dimensiones (mm) 170 (ancho) x 215 (alto) x 150 (fondo)
Peso 2,2 kg
Acabado Plástico ABS
Color Negro Blanco
Montaje Soporte en U orientable
Selección de potencia Selector rotativo
SELECCIÓN DE POTENCIA
INSTRUCTION MANUAL
BS-20BA / BS-20WA Version 1.0 1/1
BS-20BA / BS-20WA
WARNING:
⋅ Installation by qualified personnel only.
⋅ Speakers must be wired in parallel and connected to
the correct line terminals of amplifier.
⋅ Ensure that all speakers have the same polarity with
respect to each other.
⋅ Do not select another tapings if the speaker is in use.
⋅ No naked flame sources, such as lighted candles,
should be placed on the apparatus.
CABINET SPEAKER
SPECIFICATIONS
Model BS-20BA BS-20WA
Speaker Woofer 4”, Tweeter 1”
Output power RMS 20 W
Power taps 100 V 20 W, 10 W, 5 W & 2’5 W
Power taps 70 V 20 W, 10 W, 5 W, 2’5 W & 1’25 W
Impedance
250 Ω, 500 Ω, 1 kΩ, 2 kΩ, 4 kΩ & 8 Ω
Sensitivity SPL (1 W / 1 m) 89 dB
Sound pressure SPL (20 W / 1 m) 102 dB
Frequency range 100 ~ 20.000 Hz
Dimensions (mm) 170 (width) x 215 (height) x 150 (depth)
Weight 2,2 kg
Finish ABS
Color Black White
Mounting U type mounting bracket
Power selection Rotary switch
POWER SELECTION
/