Hestan AEAD36-BU Installation guide

TRASH BIN CONVERSION

(ADD-ON TO SLIDE-OUT

LP TANK TRAY)

Installation Instructions

IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN

Some parts inside your grill cart have sharp edges. Care must be taken when handling the various

components to avoid personal injury. Wear gloves when handling.

TOOLS REQUIRED:

Work gloves

Drill with Phillips screwdriver tip.

STEP 1

Pull out the LP tank tray and remove the tank, if not done so already. Align the new sheetmetal

parts with the holes as shown below. Use the drill to install the 12 screws as shown.