EN
TRASH BIN CONVERSION
(ADD-ON TO SLIDE-OUT
LP TANK TRAY)
Installation Instructions
IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN
Some parts inside your grill cart have sharp edges. Care must be taken when handling the various
components to avoid personal injury. Wear gloves when handling.
TOOLS REQUIRED:
Work gloves
Drill with Phillips screwdriver tip.
©2017 Hestan Commercial Corporation P/N 018712 REV A
STEP 1
Pull out the LP tank tray and remove the tank, if not done so already. Align the new sheetmetal
parts with the holes as shown below. Use the drill to install the 12 screws as shown.
