2. Xiaomi
  3. Redmi Buds 3 Pro
Redmi Buds 3 Pro

Xiaomi Redmi Buds 3 Pro Owner's manual

  • Hello! I've read the user manual for the Xiaomi Redmi Buds 3 Pro wireless earphones and understand its features. This document provides information on how to use the device, including its noise cancellation, dual-device connectivity, wireless charging, and battery management. I am ready to assist you with any questions you may have about these earphones.
  • How do I check the battery level of the charging case?
    How do I connect the earbuds to a new device?
    How do I use quick pairing to connect to a Mi phone?
    How do I restore factory settings?
    How do I answer or reject/end a call using the earbuds?
    How do I charge the charging case?
XIAOMI
TWSEJ01ZM
REDMI BUDS 3 PRO
WIRELESS
EARPHONES
User Manual
About this item
【Up to 35 dB Hybrid ANC】The active noise cancellation with 3 modes can reduce up to 35 dB of
surrounding noise. IPX6 Waterproof can prevent from the damage of the splash by sweat and
raindrops.
【Up to 28 Hours Battery Life】A signal charge brings you up to 6 hours listening time with noise
cancellation turned-off, and up to 28 hours when coupled with the charging case. Redmi Buds 3 Pro
supports fast charging, only 10 minutes charge you can use 3 hours. Never be afraid of battery off.
【Dual Device Connection】Redmi Buds 3 Pro can be connected with two devices simultaneously. The
devices include smartphones, tablets, PCs, and other smart devices.
【Supports Wireless Charging】Redmi Buds 3 Pro is compatible with Qi-certified chargers.
【Find your earphone】 Don’t worry about losing earphones, as long as your earphone is connected to
Bluetooth, you can find your earphone through the MIUI system.
Product Overview
The Sound you want - Enjoy a world with less background noise
35dB Smart noise cancellation | Dual-device connectivity | Wireless charging | 28h long
battery life | Three-microphone call noise cancellation
How to Use
Charging
● Charging the earbuds
When the earbuds are placed in the charging case, they will automatically start charging.
● Charging the charging casE
Use the included type-C charging cable to charge the charging case, or place it on a
compatible wireless charger with the indicator facing upwards. The indicator is white
while charging, and turns off when charging is completed.
Note: Please use a power adapter that meets the local certification requirements, or a wireless
charger that supports charging at 5 W or higher.
The center of the wireless charger must be aligned with the center of the charging case in order
to charge, which is about 8 mm above the Redmi logo on the back of the charging case. The
charging case indicator will be lit while charging.
Checking the battery level
● Checking the battery level of the earbuds
After connecting the earbuds to a phone, you can check the earbuds’ battery level on the
phone’s status bar.
● Checking the battery level of the charging case
● When the lid of the charging case is closed, press the function button or open the lid of the
charging case to check the battery level:
○ When the charging case indicator is white for about 5 seconds, it indicates the battery
level is sufficient.
○ When the charging case indicator light is blinking white, it indicates its battery level is
low and it should be charged immediately.
How to Connect
Connecting to a new device
1. Place the earbuds into the charging case, then press and hold the function button for about
two seconds. The charging case indicator light will start blinking white to indicate that the
earbuds are awaiting a connection.
2. Enable the device’s Bluetooth, then search for and connect to the “Redmi Buds 3 Pro”. If a
passcode is requested, enter “0000”.
Using quick pairing to connect to a Mi phone
Place the earbuds into the charging case and close its lid. Ensure the Mi phone is unlocked and its
Bluetooth is enabled, and hold it close to the charging case, then open the case’s lid and follow the
instructions on the phone to connect to the earbuds.
Note: To use the feature to quickly connect, the phone’s system needs to be updated to the
latest stable version. Currently, only some Mi phones support this feature.
Connecting to two devices
The earbuds can be connected to two different Bluetooth devices simultaneously. After
connecting the earbuds to the first device, put them in the charging case and open the lid.
Press and hold the function button on the charging case for two seconds, then the indicator will
start blinking white, and the earbuds are ready to be paired with a second device.
Disconnecting
When a device’s Bluetooth is disabled, or if the earbuds are out of range, the earbuds will
automatically enter awaiting connection mode. If the earbuds remain disconnected from the
device for 10 minutes, they will enter sleep mode. Wearing the earbuds again will wake them up
and they will enter awaiting connection mode
Automatic connection
When the earbuds are in the charging case, opening the lid of the charging case will
automatically connect the earbuds to the most recently used Bluetooth device. If no
connection history is detected, or if the earbuds cannot successfully connect to any Bluetooth
device, the earbuds will automatically enter the awaiting connection mode.
Great Features
9 mm composite vibrating diaphragm coil Recovers more sound details
9 mm composite vibrating diaphragm coil brings you excellent hearing
experience. After being tuned by a professional from the Xiaomi’s internal
sound lab, a high-pitched sound is clear and not distorted while a low-pitched
sound is rich and pure with more refined sound quality.
28-hour ultra-long battery life* Continue to enjoy the music
With a built-in low-power chip, the headphones can work for up to 6 hours on a
single charge. With the assistance of a charging case, the headphones can
work for up to 28 hours. So you can enjoy music for hours and hours.
Supports both fast charging and wireless charging
With fast charging, the earphones can charge for only 10 minutes, then you can
enjoy music for up to 3 hours. If the battery is low, take a short break and let the
lamp come on. The charging box also supports Qi wireless charging, which
makes charging super convenient.
Great Features
Dual-device smart connectivity - Capable of connecting to two devices
simultaneously
The same set of earbuds can be connected to two devices crossing
platforms such as Android, iOS, and Windows simultaneously, allowing you
to easily switch between entertainment and work. Pairs with Bluetooth
through opening the earbud box near your phone or by quickly clicking the
pop-up window which enables you to enjoy the new fast connection method.
Deep noise cancellation for Metro, airplane
When traveling by metro or airplane, it effectively cancels engine roaring
and other vibration noises inside the car/cabin, making your trip quiet and
comfortable.
Functions
During calls
Gently tap either earbud twice: Answer call Gently tap either earbud three times: Reject/End call
Music
Gently tap either earbud twice: Play/Pause
Gently tap either earbud three times: Next song
Take out either earbud: Pause music
Noise cancellation
Press and hold either earbud to switch between:
Enable noise cancellation <> Transparency mode
● How do I check the battery level of the charging case?
When the lid of the charging case is closed, press the function button or open the
lid of the charging case to check the battery level.
Manuals.plus
● How do I connect the earbuds to a new device?
Place the earbuds into the charging case, then press and hold the function button
for about two seconds. Enable the device's Bluetooth and search for and connect to
the "Redmi Buds 3 Pro".
●How do I use quick pairing to connect to a Mi phone?
Place the earbuds into the charging case and close its lid. Ensure the Mi phone is
unlocked and its Bluetooth is enabled, and hold it close to the charging case, then
open the case's lid and follow the instructions on the phone to connect to the earbuds.
●How do I restore factory settings?
Place the earbuds into the charging case, press and hold the function button for at
least ten seconds until the indicator turns white, then release the button.
Manuals.plus
●How do I answer or reject/end a call using the earbuds?
Gently tap either earbud twice to answer a call, and tap three times to reject/end a
call.
● How do I charge the charging case?
Use the included type-C charging cable to charge the charging case, or place it on
a compatible wireless charger with the indicator facing upwards.
Manuals.plus
Like And Subscribe
us for more Videos
Manuals.plus
/