VISUAL COMFORT KW 3046 User manual

Hello! I've reviewed the assembly instructions for the Bayliss Table Lamp, model KW 3046. This document outlines the steps for assembling the lamp, including installing the harp, shade, and light bulb. It also provides important care instructions and safety information. I'm ready to answer your questions about the lamp's assembly and usage.
What tool is required for assembly?

Is a light bulb included?

How should I clean the lamp?

Bayliss Table Lamp

Item # KW 3046

ASSEMBLY INSTRUCTIONS

This light fixture should be installed in accordance with all applicable,

local installation codes, and by a person familiar with the construction

and operation of it, as well as the hazards involved. Inspect item and

contents carefully. If any damage or defect is found, do not install.

Retain all packaging material until installation is complete and approved.

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Install harp (C) by squeezing together and inserting into top of

saddle (D).

3. Remove finial (A) from harp (C).

4. Remove shade (B) from packaging and install to harp (C) using

finial (A).

NOTE: If shade has additional packaging, carefully cut off from

interior of shade to avoid damages.

5. Install light bulb into the socket.

6. Remove protective cover (E) from the plug.

7. Plug into electrical outlet and test the fixture.

Care Instructions: Clean only with a soft dry cloth or feather duster. Do

not use abrasive or chemical agents.

NOTICE:

Bulb not included

B (Packaged separately)

TOOLS REQUIRED (NOT INCLUDED):

Scissors