XF & XF HP SERIES TOTAL STATION
QUICK START GUIDE
Version: 3.00
April 2022
Part Number: 114465-01
*114465-01*
2
Item Description Item Description
1Carrying handle 15 Vertical clamp
2Optical sight (Finder) 16 Horizontal axis indication mark
3Telescope focusing ring 17 Laser Safety label. Attached to the telescope.
a. Class 2 - XF Series
b. Class 3R - XF HP Series
4Telescope eyepiece 18 Objective. LASER LIGHT IS EMITTED FROM THIS
PA RT.
5Diopter ring 19 Optical or optional laser plummet. (This picture
shows the optical plummet.)
6Reticle plate cover 20 Leveling screw
7Face-1 display / keyboard 21 Tribrach
8Tribrach clamp knob 22 Circular level
9Laser Safety label. Attached underside when the
instrument is laser plummet model.
23 CFR label. Attached to the underside of the
keyboard.
10 Horizontal clamp 24 FCC label. Attached to the underside of the
keyboard.
11 Horizontal tangent screw 25 Data output / external power / input connector.
CAUTION: Input voltage shall be 4.5 to 5.2 V DC
12 Battery box release knob 26 USB ports (x2)
13 Battery box 27 Laser Safety label. Attached to the telescope.
a. XF Series; b. XF HP Series
14 Vertical tangent screw
117
2
3
4
5
6
7
8
9
12
10
13
11
14
15
23
16
18
19
20
21
22
24
25
26
27
16
12
13
a
b
a
b
3
Standard components
• Instrument main body
• Battery pack (x 2)
• Battery charger
• AC adapter
• Adjustment pin, Allen wrench
• Objective lens cap
• Rain/dust cover
• Carrying case
• Shoulder strap (x 2)
• USB cable
Charging the battery pack
C Warning: Before charging or connecting the battery, please refer to the battery safety information in the
Nikon XF & XF HP Series Total Station Instruction Manual.
The battery pack is supplied partly charged. Before using the battery for the first time, charge the battery
completely using the supplied battery charger.
Conditioning/Calibrating the battery
Battery calibration is necessary about once every six months or more often, if required. Calibration ensures the
reported battery charge remaining is accurate.
Inserting the battery pack
Before inserting the battery pack, clear any dust or other foreign particles from the battery contacts.
1. Turn the battery box release knob counterclockwise and open the battery box cover.
2. Put the battery pack into the battery box. Insert the battery pack with the connectors bottom first, facing
inside.
3. Close the battery box cover and turn the knob clockwise until the secure click sound is heard.
C CAUTION: If the battery box cover is not closed, this could adversely affect the watertightness of the
instrument.
1
2
3
© 2017–2022, Trimble Inc. All rights reserved. Trimble is a trademark of
Trimble Inc., registered in the United States Patent and Trademark Office and
other countries. Nikon is a registered trademark of Nikon. All other trademarks
are the property of their respective owners.
This is the April 2022 release version 3.00 of the Nikon XF & XF HP Series Total
Station Quick Start Guide, P/N 114465-01. It applies to the Nikon XF & XF HP total
stations.
Spectra Geospatial
10368 Westmoor Dr.
Westminster, CO, 80021
USA
www.spectrageospatial.com
Safety information
The Nikon XF Series Total Station is a Class 2 Laser Product, and the XF HP Series Total Station is a Class 3R
Laser Product in accordance with: IEC60825-1:2014: Safety of Laser Products.
Precautions: To counteract hazards, it is essential for all users to pay careful attention to the safety
precautions and control measures specified in the standard IEC60825-1:2014. For further information please
refer to the Nikon XF & XF HP Instruction Manual.
Note – This product complies with IEC 60825-1:2014 and IEC 60825-1:2007 and 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser Notice no. 50, dated June 24, 2007.
C Warnings: Only qualified and trained persons should be assigned to install, adjust and operate the
laser equipment. Precautions should be taken to ensure that persons do not look directly, with or without
an optical instrument, into the beam. Laser beam path should be located well above or below eye level
wherever practicable.
Table 1.1 Specifications for laser emission
XF Series XF HP Series
Laser pointer Class 2 Laser pointer Class 3R
Wave length
Output power
630 to 680 nm
CW Po ≤ 1 mW
Wave length
Output power
630 to 680 nm
CW Po ≤ 4.75 mW
Distance meter Class 1 Distance meter in Reflectorless mode Class 3R
Wave length
Output power
Pulse width
850 to 890 nm
Pulse Po ≤ 22 W
< 5 ns
Wave length
Output power
Pulse width
630 to 680 nm
Pp <8.75 mW Po <4.75 mW
1.2 ns/400 MHz to 1.6 ns/320 MHz
Laser plummet Class 2 Distance meter in Prism mode Class 1
Wave length
Output power
635 nm
CW Po < 1.0 mW
Wave length
Output power
Pulse width
630 to 680 nm
Pp <0.037 mW Po <0.02 mW
1.2 ns/400 MHz to 1.6 ns/320 MHz
Table 1.2 Conforming standards
XF Series XF HP Series
E.U.
IEC60825-1:2014
Laser Pointer: Class 2
Distance Meter: Class 1
Laser plummet: Class 2
IEC60825-1:2014:class 3R
USA
FDA21CFR Part 1040 Sec.1040.10 and 1040.11
(except for deviations pursuant to Laser Notice
No.50, dated June 24, 2007)
FDA21CFR Part 1040 Sec.1040.10 and 1040.11
(except for deviations pursuant to Laser Notice No.50,
dated June 24, 2007)
台灣法規遵循
無線設備警告聲明
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更
原設計之特性及功能。 低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象
時，應立即停用，並改善至無干擾時方得繼續使用。 前述合法通信，指依電信管理法規定作業之無線電通
信。 低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
For details regarding the features and operations of this instrument, and to access the latest information
including instruction manuals and application software, please go to www.spectrageospatial.com.
/
