muuto Dots Operating instructions

MUUTO ØSTERGADE 

DK COPENHAGEN K DENMARK

FOR MORE INFORMATION

VISIT MUUTO.COM

— Lars Tornøe

DOTS

When mounting your Muuto product to a wall, it

is important that it is mounted both securely and

correctly. The best way to mount your product

depends on the type of wall it is being aached to.

A wall plug is required and it is vital that you find

one that fits both the screw and the wall material.

If in doubt, ask for advice in your local hardware

store. They will be able to assist you in finding the

right wall plug and screw.

WALL MOUNTING GUIDE Metal Dots

. Metal Dots can be installed as a cabinet handle

as shown below.

CONTENT

ASSEMBLY INSTRUCTION . Before mounting your Dot to the wall, drill

a  mm hole and add a plug.

. Add the screw to the plug.

. Screw on your Dot (be careful not to tighten too

hard to avoid damage inside.)

.

x 1

Included

with Dots Metal

x 1x 1

Download PDF