MechaTronix ModuLED Giga-HBG Operating instructions

  • Hello! I have analyzed the provided document about the MechaTronix ModuLED Giga-HBG LED Cooler. This product is designed for high-power LED applications, particularly with Osram LEDs, and provides various mounting options. I am ready to answer any questions you have regarding the specifications, features, or mounting of this LED cooler.
  • What type of LEDs are compatible with this cooler?
    What are the recommended thermal interface materials?
    What mounting options are available for this cooler?
No.818, Dashun 2nd Rd., Sanmin Dist., Kaohsiung City 80787, Taiwan
sales@mechatronix-asia.com www.led-heatsink.com www.mechatronix-asia.com
Tel: +886-7-381-5892 Fax: +886-7-383-9293 VAT: 28600841
ø152 x H100 / 150 (mm)
Rth 0.52 - 0.46 °C/W
Power Pd 95 - 110 W
Mounting indicator marks overview
MechaTronix recommends the use of a high
thermal conductive interface between the LED
module and the LED cooler. Either thermal grease,
a thermal pad or a phase change thermal pad
thickness 0.1-0.15mm is recommended. Thermal
pads or phase change thermal pads can be pre-
applied from MechaTronix.
Osram Opto Semiconductors provide different high power LED including
OSCONIQ®, DURIS® & OSLON® family. The 38x38mm LED engines consist of high
power emitters from Osram Opto Semiconductors. Color temperatures from
2.700K to 6.500K. The engines produce from 6.000lm up to 18.000lm depend on
the choosen driving current.
Mounting Instruction
ModuLED Giga-HBG | Osram Opto Semiconductors High Bay LED Cooler
ø152mm with driver connection system
Mounting options
MCPCB designed with Osram Opto high power OSCONIQ®, DURIS® & OSLON® LED up to Pe 162W could
fit on the LED cooler with several mounting options, like:
- 2x M3 holes at 35mm (Green indicator marks)
- 2x M3 holes at 45.25mm (Red indicator marks)
- 4x M4 holes at 58.42mm (Blue indicator marks)
For complete mounting options, please check product drawing & dimensions.
To verify your LED compatibility, please contact MechaTronix.
Below a perfect combination with Cezos PCB.
Model names
Q0-038038-xxx-C3600-P024
Cezos Osram PCB's
Mounting
Direct mounting with 2 self tapping screws M3 x 8mm
Red indicator marks
With 60 of high power Osram OSLON® - CSSRM2 LED on a high end carrier MCPCB comes in a wide
variety of CCT colors, flexible driving current up to 1.400mA.
1/1