THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
EN
DE
FR
ES
IT
PL
With your inspiring rating, COSTWAY will be more consistent to offer you EASY
SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
Mit Ihrer inspirierenden Bewertung wird COSTWAY konsistenter sein, um Ihnen EIN
SCHÖNES EINKAUFSERLEBNIS, GUTE PRODUKTE und EFFIZIENTEN SERVICE zu
bieten!
Avec votre évaluation inspirante, COSTWAY continuera à fournir une EXPÉRIENCE
D’ACHAT PRATIQUE, des PRODUITS DE QUALITÉ et un SERVICE EFFICACE !
Con su calificación inspiradora, COSTWAY será más consistente para ofrecerle
EXPERIENCIA DE COMPRA FÁCIL, BUENOS PRODUCTOS y SERVICIO EFICIENTE.
Con la tua valutazione incoraggiante, COSTWAY sarà più coerente per offrirti
ESPERIENZA DI ACQUISTO FACILE, BUONI PRODOTTI e SERVIZIO EFFICIENTE!
Dzięki twojej opinii COSTWAY będzie mógł oferować jeszcze WYGODNIEJSZE
ZAKUPY, LEPSZE PRODUKTY i SPRAWNIEJSZĄ OBSŁUGĘ KLIENTA.
Wall Safe
HW50957
USER’S MANUAL
US office: Fontana UK office: Ipswich AU office: Truganina
DE office: Hamburg
FR office: Saint Vigor d'Ymonville
PL office: Gdańsk
02 03
OPERATION MANUAL
Please do not keep emergency keys in your safe!
Important Notes
1. Open the packing, you will find a user manual plastic bag included
2 emergency keys. Do not store emergency keys in the safe.
2. Read the manual carefully before you install the safe.
3. Make sure the safe location is selected carefully. lt must be away
from electrical, plumbing. duct work, etc.
4. If an incorrect code is entered 3 times, the system will "freeze" for
20 seconds.
5. Designed for moderate security. This safe is not fire rated.
Installation:
1. Choose a location where the safe will be convenient to use, but not
easily visible to intruders.
2. Measure the back of the safe for exact fit. Cut the hole in drywall
based on your measurement.
3. Install your wall safe through the cutout in wall so that the hinge
side of the safe is flush against the right hand stud and the front
flange is flat against the wall.
4. With the safe open, install the three screws(included in the
package)through the holes in the right hand side of the safe first.
Tighten the screws so the safe is flush to the right stud.
Open the safe after installing the batteries:
Change the code
A. With door open, locate the red button on the back of door near the
hinge. Press it, you will hear 2 beeps and see a yellow light on for
seconds.
B. Input a new code of 3 to 8 digits, then press button "B". The
storage of the new code will be confirmed by two beeps.
5. Install the three screws on left side of safe and tighten.
Preparation for use: This product is battery operated. Only use
1.5V AA batteries. To install the batteries, just remove the battery
cover plate at the back of the door and install the four batteries.
Ensure the + and - positions are correct.
Override Key & first time to open the safe with override
key:
For your convenience, this wall safe is engineered a manual override
system in this product. lf you forget or misplace your code or the
batteries die, you can still access your valuables. The safe serial
number is near the override lock factory can make a copy of your key
by this number. If you lose your key, please contact us.
You will need to do the following to find a lock and use the override
key to open the safe:
Remove small screw by counter-clockwise on the electronic lock.
Remove small cover that holds the keypad .
Insert your key and turn it counter clockwise. Turn the knob
clockwise, the door will open. After opening the safe, please set up
the keypad and screw.
04 05
Open the safe
A. Input your code(factory default code:159), then press the
"B"button, the green light will turn on.
B. Turn the knob clockwise within 5 seconds, the door is opened.
C. Each key being pressed is indicated with a buzzer and a yellow
flashing light.
If the entered code is invalid, then the yellow light will flash and
the buzzer will quickly beep and the user should enter the correct
once again.
Battery Replacement:
A red light on the control panel indicates low batteries. At this point,
there is still enough power to open the safe a few more times. Once
you see the red light, the batteries should be changed immediately!
To replace the batteries, open the sliding cover on the back of the
door and replace the battery. Use AA battery only.
CAUTION: Entering an incorrect code 3 times will freeze the system
for 20 seconds.
Close the safe
Turn the knob counter-clockwise, the mechanism will automatically
lock the safe.
Do not keep the key in your safe.
In the event of battery failure, you will not be able to open the safe.
1 2 3
4 5 6
7 8 9
A 0 B
Small screw Small coverOverride key lock under the small cover
Decorative Part Knob Keyboard
-
1
-
2
-
3
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Costway HW50957 Manuel utilisateur
- polski: Costway HW50957 Instrukcja obsługi
Related papers
-
Costway BB0445 User manual
-
Costway EP23758 User manual
-
Costway TY327802BK+ Operating instructions
-
-
Costway ES10144US-WH User manual
-
-
-
-
-
