2. NewLine
  3. Z Series
Z Series

NewLine Z Series Installation guide

  • Hello, I'm your chat assistant. I've reviewed the user manual for installing Wi-Fi Modules on the newline Z Series displays. This document includes instructions, safety caution and contact information for technical support. I'm ready to answer your questions about the Wi-Fi Module installation on your device.
  • What should I do before inserting or removing the Wi-Fi module?
    What happens if I insert or remove the Wi-Fi Module while the display is powered on?
    How do I contact the Technical Support Team?
Z Series How To
1. Unscrew the 2 screws on the Wi-Fi Module port and remove the shielding cover.
Perform the following steps to install the Wi-Fi Module on the Z Series.
2. Insert the Wi-Fi Module into the port on the rear of the panel until rmly seated, using the 2 screws to secure it.
Contact Us
Still need additional assistance? Contact our Technical Support Team at 833-469-9520, ext 5000
or support@newline-interactive.com.
How to Install Wi-Fi Modules
Caution
The Wi-Fi Module does not support hot plugging. Therefore, you must
insert or remove the Wi-Fi Module when the display is powered o.
Otherwise, the displays or Wi-Fi Module may be damaged.
/