2. CommScope
  3. SM1014
SM1014

CommScope SM1014 User manual

  • Hello! I have analyzed the Installation Instructions for the CommScope NOVUX TC-1460-IP Cable Mounting Bracket. This document explains how to mount the bracket in various ways, install products with or without a UMB backplate, and secure overlength cables. I am ready to assist you with any questions you have regarding these instructions.
  • What is included in the kit?
    Can the CMB be mounted on flat surfaces?
    How can I mount the CMB on a pole?
1 Kit content
2
1
3
4
N° Description Qty
1 Cable Mounting Bracket (CMB) 1
2 Screw M3.5X25 2
3 Small size handle 1
4 Medium size handle 1
Installation Instructions
page 1 / 7
© 2022 CommScope, Inc. All Rights Reserved
NOVUX™ Fiber Optic System
TC-1460-IP Rev. B, January 2022
http://
www.commscope.com
Cable Mounting Bracket
© 2022 CommScope, Inc. All Rights Reserved
Visit our website or contact your local CommScope® representative for more information. www.commscope.com. All trademarks identified by ® are
registered trademarks in the US and may be registered in other countries. All third party product names, trademarks and registered trademarks are property
of their respective owners. This product may be covered by one or more U.S. patents or their foreign equivalents. For patents, see www.cs-pat.com.
For technical assistance, customer service, or to report any missing/damaged parts, visit us at: http://www.commscope.com/SupportCenter.
page 1 / 7
Contents
Contents1 Kit content.......................................................................................... 1
2 Mounting options..............................................................................3
2.1 Mounting the CMB on a flat surface....................................................... 3
2.2 Mounting the CMB on a pole with screws............................................ 3
2.3 Mounting the CMB on a pole with straps............................................. 4
3 Mounting products with the UMB interface backplate.................4
3.1 Install the handle on the CMB....................................................................4
3.2 Install products with the UMB interface backplate............................ 5
3.3 Un-install products with the UMB interface backplate.....................5
4 Mounting products whitout the UMB backplate interface...........6
4.1 Install products whitout the UMB interface backplate..................... 6
5 The CMB and cable storage.............................................................. 7
5.1 Secure the overlength cable to the CMB...............................................7
5.2 Cable storage capacity on the CMB.........................................................7
page 2 / 7
© 2022 CommScope, Inc. All Rights Reserved
2 Mounting options
2.1 Mounting the CMB on a flat surface
Note: Mounting hardware (screws) not included.
2.2 Mounting the CMB on a pole with screws
Note: Mounting hardware (screws) not included.
page 3 / 7
© 2022 CommScope, Inc. All Rights Reserved
2.3 Mounting the CMB on a pole with straps
Note: Mounting hardware (straps) not included.
3 Mounting products with the UMB interface backplate
3.1 Install the handle on the CMB
1 Place the handle in the position as shown in the image and push down.
2 Push the handle to the left. The handle is now installed and can moved easely to both sides.
PRODUCT SIZE SMALL Handle MEDIUM Handle
Product size width < 10 cm (3.93 inches) •
Product size width > 10 cm (3.93 inches) •
page 4 / 7
© 2022 CommScope, Inc. All Rights Reserved
3.2 Install products with the UMB interface backplate
"CLICK"
3.3 Un-install products with the UMB interface backplate
Option 1
Option 2
"Release"
page 5 / 7
© 2022 CommScope, Inc. All Rights Reserved
4 Mounting products whitout the UMB backplate interface
4.1 Install products whitout the UMB interface backplate
page 6 / 7
© 2022 CommScope, Inc. All Rights Reserved
5 The CMB and cable storage
5.1 Secure the overlength cable to the CMB
Note: Mounting hardware (straps) not included.
5.2 Cable storage capacity on the CMB
Note: The minimum reel diameter is 17,5 cm (6,9 inch).
Cable diameter Capacity
3,5 mm (0,14 inch) 90 m (295 ft)
5 mm (0,20 inch) 50 m (164 ft)
8 mm (0,31 inch) 18 m (59 ft)
page 7 / 7
© 2022 CommScope, Inc. All Rights Reserved
/