5422935
5422942 SKU
USER MANUAL
SIERRA LED DOWNLIGHT
IMPORTANT SAFETY DETAILS
1. Ensure the AC/Mains power is NOT connected and cannot be unexpectedly reconnected during installation.
2. Thisproductmustbeinstalledbyaqualiedelectricianinaccordancewithinstructionsprovidedandincompliancewithrecognisedelectrical
andsafetyregulationsrelevanttothecountryitisbeinginstalled.
3. This product may NOT be installed by minors or people with a mental disability.
4. Theproductanditsassociatedcontrolgeararedesignedtooperateon220-240volts50Hz.
5. TheproductshouldNOTbecoveredwithinsulationmaterialatanytime.Unlessusingamodelwithaninsulationguard.
6. This downlight range is designed to be installed in a ceiling tile / plasterboard / solid material, with a thickness of 3mm (minimum) to 30mm
(maximum).
7. This product is for indoor and outdoor use.
8. Minimumclearanceis50mmabovetheinstalledttingandshouldNOTbeinstalledwithin50mmofanyjoist.
9. Earthwireisprovidedifrequired.
1. Ensure the mains power is turned OFF and cannot be unexpectedly reconnected.
2. For new installations use cutting tools suitable for the material and carefully cut the required hole. Refer to box packaging for cut-out
dimension.
3. Forrefurbishment/retrotinstallations,ensurethatexistingholeissuitableandstrongenoughtoholdthenewdownlight.
Supportthesurroundingareaifrequired.Iftheexistingholeislargerthantheprescribedcut-out,anadditionaladapterisavailable.
4. ConnecttheAC/mainscable.Whereaterminalblockisprovided,incomingcableconnectionsare;L=Livepowerconductor(brownwire),
N=Neutralpowerconductor(bluewire),Earth=(green/yellowwire).
1.
5.
2.
6.
3.
7.
4.
8.
INSTALLATION DETAILS
!
OFF
60mm
!
ON