fungeneration Simple Screen User guide

Brand: fungeneration

Model: Simple Screen

Category: Projection screens

Type: User guide

fungeneration Simple Screen is a versatile projection screen with a tripod, designed for front projection in various settings. Its 16:9 aspect ratio and opaque black backing ensure clear and vibrant image quality. The screen is height adjustable, making it suitable for different room sizes and setups. With its compact transport size, it's easy to carry and store, making it ideal for mobile presentations, home theaters, or outdoor movie nights.

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • inf[email protected] DocID: 539216, 539251_21.03.2022

Simple Screen 100 | Simple Screen 70

Quick start guide

This quick start guide contains important information on the safe operation of the

product. Read and follow the safety advice and instructions given. Retain the quick

start guide for future reference. If you pass the product on to others please include this

quick start guide.

For the transport and protective packaging, environmentally friendly mate-

rials have been chosen that can be supplied to normal recycling. Ensure that

plastic bags, packaging, etc. are properly disposed of. Do not just dispose of

these materials with your normal household waste, but make sure that they are col-

lected for recycling. Please follow the notes and markings on the packaging.

Safety instructions

Intended use

This device serves as a projection screen with tripod. Any other use or use under

other operating conditions is considered to be improper and may result in personal

injury or property damage. No liability will be assumed for damages resulting from

improper use.

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are

not within reach of babies and young children. Choking hazard! Ensure

that children do not detach any small parts from the product. They could

swallow the pieces and choke! Never let children unattended use electrical devices

Risk of falling

Only place the device on at and stable surfaces.

Where to use the product

Never use the product

• in conditions of extreme temperature or humidity

• in extremely dusty or dirty areas

• in locations where the unit can become wet

• on sloping, uneven or insuciently stable surfaces - risk of falling!

General handling

• To prevent damage, never use force when handling the product.

• Never immerse the product in water. Just wipe it with a clean dry or moist cloth. Do

not use liquid cleaners such as benzene, thinners or ammable cleaning agents.

Features

• Projection screen with tripod

• Format: 16:9

• Opaque due to black backing

• Stepless height adjustment

• Projection type: front projection

• Colour: white

Technical specications

Screen size: max. 221×124cm (100" - item no. 539216)

max. 155×87cm (70" - item no. 539251)

Hight: min. 184cm / max. 250cm (item no. 539216)

min. 150cm / max. 205cm (item no. 539251)

Transport size without tripod: 223×10cm (item no. 539216)

170×10cm (item no. 539251)

Transport length tripod: 158cm (item no. 539216)

135cm (item no. 539251)

Weight: 11.5kg (item no. 539216)

8.5kg (item no. 539251)

Front Rear

Side

Projection surface

Case

Tripod

Overview

Setup

Follow the steps below to set up the projection screen:

1. Select a suitable, level place for installation.

2. Unfold the tripod feet.

3. Fix the closed screen in the device on the lower stand tube and lock it.

4. Hook the tie rod into the xture at the top of the tripod and raise the screen to

the desired height.

5. After use, detach the projection screen and slide it back into the case.

fungeneration Simple Screen User guide

Brand: fungeneration

Model: Simple Screen

Category: Projection screens

Type: User guide

Download PDF

report

fungeneration Simple Screen User guide

fungeneration Simple Screen User guide

Other documents