SIHANM B0BJZ4CWFF User manual

Canopy Setup

QUICK SETUP INSTRUCTIONS ONLY!

Refer to the original owner's manual for complete use, care and safety information.

WARNING:

Never set up or continue to use in rain, wind, or storm conditions, especially lightning storms.

1 OPEN THE CANOPY FRAME

With a person on each corner, lift and partially

pull the canopy frame apart.

2 LOCK THE CANOPY FRAME

Push the roof locking mechanism upward while

holding the leg down. A snap button will engage in

the locating hole. Repeat on all corners.

3 ATTACH CANOPY FABRIC

Unfold the canopy top and place on top of the

canopy frame.

Secure the canopy top to the frame using the

hook and loop fastener connections.

4 ADJUST THE CANOPY HEIGHT

Press the red button on each leg to raise/lower the

canopy height. A snap button will engage in the

locating hole. Repeat on all corners.

5 ANCHOR THE CANOPY

Insert a stake through each foot of the canopy.

Attach one end of each rope to each corner of the

canopy fabric.

Tie the ropes to the stakes and insert the stakes

into the ground at a 45° angle.