2
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
INTRODUCTION
Thank you for purchasing this CLARKE 75.6L Key Operated Safe. Before
attempting to operate the safe, it is essential that you read this manual
thoroughly and carefully follow all instructions given. In doing so you can look
forward to the safe giving you long and satisfactory service.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of
12 months from the date of purchase. Please keep your receipt as proof of
purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
REPLACEMENT KEY
A key number has been carved into the
face of the keys. This number must be
registered with us in the event you require
a replacement key.
Please complete the registration form at
the back of this manual and send it to the
address stated with the form. If you fail to
register the safe we will not be able to
provide you with a replacement key.
We recommend that in addition to
sending the completed form, you record the number in the space below.
Please retain this document for future reference.
Record the key number here:_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
INSTALLING THE SAFE
The safe should be secured vertically to a wall, cupboard shelf or to the floor
using the expansion bolts (supplied). There are 9mm holes on the rear and
floor of the safe for securing to a wall or to the floor.
SPECIFICATIONS
Dimensions (DxWxH) 350 x 420 x 600 mm Weight 23.6 kg
No. of keys supplied 2 No. of Shelves 2
