BIXOLON XL5-40CT Series User manual

XL5-40CT Series
BIXOLON
Brand
BIXOLON
Model
XL5-40CT Series
Type
User manual

BIXOLON XL5-40CT Series is a high-performance label printer designed for a wide range of applications. It features a compact and stylish design, making it ideal for space-constrained environments. With its fast print speed and reliable performance, the XL5-40CT Series is perfect for printing labels, receipts, and tags in retail, healthcare, and logistics settings.

BIXOLON XL5-40CT Series is a high-performance label printer designed for a wide range of applications. It features a compact and stylish design, making it ideal for space-constrained environments. With its fast print speed and reliable performance, the XL5-40CT Series is perfect for printing labels, receipts, and tags in retail, healthcare, and logistics settings.

1. After the Printer Power Switch Off at the rear of the Printer, Unplug the
Power Connector from the Power Jack.
2. Open the Printer, and while pressing the yellow circle on the Cover Cutter,
Disassemble the Paper Support upwards (yellow arrow).
Remove the Cover Cutter by pressing the Hook (in Red circle & arrow)
downward.
3. Remove one screw (in Red circle) using a screwdriver. Disassemble each
part in the order of Cover Front & Cover Taken with slightly raised upwards.
When disassembling the Cover Taken, be careful not to disconnect the
wire.
4. Remove two screw (in Red circle) using a screwdriver.
Disassemble the Auto Cutter forward while slightly raising it up.
Disassemble the Auto Cutter Wire from Cover Taken Connector and
Reassemble the new Auto Cutter.
Be careful to avoid tangling with other wires when shaping.
5. After twisting the Auto Cutter Wire (in Red square), put it in the inner space
(red circle).
6. Reassemble the Cover Taken Hook(Red Circle parts) into the Printer(Yellow
Squares).
Be careful that the Wire does not get stuck.
7. Reassemble the Cover Front Hook (Red Circle parts) into the Printer (Yellow
Squares).
Be careful that the Wire does not get stuck.
8. While pressing Cover Taken & Cover Front down, reassemble (Red circle).
Be careful that the Wire does not get stuck.
9. Reassemble the Paper Support that was removed in step 2.
Reassemble the hook on the red circle of the Cover Cutter into the red
square hole.
See the User Manual for how to supply paper.
How to Mount Auto Cutter
KN04-00210A (Ver.1.0)
XL5-40CT Series
Cover Cutter
Paper Support
Power Switch
Power Connector
Power Jack
Auto Cutter Wire
Cover Taken Connector
Auto Cutter
Ground Wire
Cover Taken
Cover Front
Cover Taken
Cover Front
Cover Taken
Cover Front
Cover Cutter
Power Switch Off Power Connector Power Jack
Printer Cover Cutter
Paper Support
Hook Cover Cutter
Cover Front, Cover Taken
Cover Taken Wire
Auto Cutter
Cover Taken Connector
Auto Cutter
Auto Cutter Wire Hook
Ground Wire
Wire
Cover Taken Hook
Wire
Cover Front Hook
Wire
Cover Taken & Cover Front
Wire
Paper Support Cover Cutter
Hook
User Manual
Auto Cutter
KN04-00210A (Ver.1.0)
XL5-40CT
Power Switch
Power Connector
Power Jack
Cover Cutter
Paper Support
Cover Taken
Cover Front
Auto Cutter Wire
Cover Taken Connector
Auto Cutter
Ground Wire
Cover Taken
Cover Front
Cover Taken
Cover Front
Cover Cutter
  • Page 1 1
  • Page 2 2

BIXOLON XL5-40CT Series User manual

XL5-40CT Series
BIXOLON
Brand
BIXOLON
Model
XL5-40CT Series
Type
User manual

BIXOLON XL5-40CT Series is a high-performance label printer designed for a wide range of applications. It features a compact and stylish design, making it ideal for space-constrained environments. With its fast print speed and reliable performance, the XL5-40CT Series is perfect for printing labels, receipts, and tags in retail, healthcare, and logistics settings.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents