INSTALL BATTERIES
WS1010
Quick Start Guide
HANDHELD RADIO SCANNER
400 Channels
Package Contents:
See the User Guide for complete instructions
START HERE!
Scanner
Rechargeable
Battery Holder
Rechargeable Battery
Holder
Alkaline Battery
Holder
Antenna
Battery
Holder
Belt Clip
12
1. Slide open the battery compartment.
2. Place 4 AA batteries into the correct battery holder
matching polarity symbols (+ / –):
• Black – Alkaline (non-rechargeable)
• Yellow – Rechargeable Ni-MH or Ni-Cd
3. Place the battery holder into the battery compartment.
The battery holder fits only one way. Do not force it.
4. Replace the cover.
1. Align the antenna slots
with the tabs on the
antenna jack.
2. Press the antenna over
the jack and turn the base
of the antenna clockwise.
3Find Frequencies:
Go to www.radioreference.com/db/browse. Select
your state/country and county/region to locate a list of
frequencies in your area.
Program Frequencies:
1. Preset squelch between 10 and 12 o’clock position
2. Press PGM to enter the program mode. Enter the
channel number (1-400) where you want to store a
frequency, then press PGM again.
3. Use the number keys and the period(.) key to enter
the frequency.
4. Press ENT to store the frequency into the channel.
5. Press PGM to go to the next channel.
6. Press SCAN to begin scanning.
PROGRAM FREQUENCIES
CONNECT ANTENNA
AC Adapter
P/N 581000b © 2022 The Whistler Group, Inc.
09A22
Still need help?
visit our FAQs on our website at
www.whistlergroup.com
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Radio Shack 20-514 Owner's manual
-
Radio Shack 20-164 User manual
-
-
-
-
Albrecht AE 55 H Owner's manual
-
-
-
-