Elation PIXEL BAR 30IP User manual

PIXEL BAR

30IP™ / 60IP™ / 120IP™

user manual

2

diagrams, images, and instructions herein are subject to change without notice. ELATION

PROFESSIONAL logo and identifying product names and numbers herein are trademarks

of ELATION PROFESSIONAL. Copyright protection claimed includes all forms and matters

of copyrightable materials and information now allowed by statutory or judicial law or

hereinafter granted. Product names used in this document may be trademarks or

registered trademarks of their respective companies and are hereby acknowledged. All

non-ELATION brands and product names are trademarks or registered trademarks of their

respective companies.

ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all

liabilities for property, equipment, building, and electrical damages, injuries to any persons,

and direct or indirect economic loss associated with the use or reliance of any information

contained within this document, and/or as a result of the improper, unsafe, insufficient and

negligent assembly, installation, rigging, and operation of this product.

Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040

323-582-3322 | 323-832-9142 fax | www.elationlighting.com | info@elationlighting.com

Elation Professional B.V. | Junostraat 2 | 6468 EW Kerkrade, The Netherlands

+31 45 546 85 66 | +31 45 546 85 96 fax | www.elationlighting.eu | info@elationlighting.eu

Elation Professional Mexico | AV Santa Ana 30 | Parque Industrial Lerma, Lerma, Mexico 52000

+52 (728) 282-7070

DOCUMENT VERSION

Due to additional product features and/or enhancements, an updated

version of this document may be available online.

Please check www.elationlighting.com for the latest revision/update of this

manual, before beginning installation and/or programming.

Date

Document

Version

Notes

05/23/18

1

Initial release

05/25/18

1.2

Updated release

06/08/18

1.4

Added DMX Channel Chart

11/27/18

1.6

Updated version

11/08/19

1.8

Updated included power/data jumper cable spec (4pin not 5pin)

3

CONTENTS

General Information

4

Limited Warranty (USA Only)

5

Safety Guidelines

6

Maintenance Guidelines

8

Fixture Overview

9

Installation Guidelines

10

Connections and Cables

14

Linking and Control

15

DMX Channel Functions and Values

16

Specifications

24

Optional Accessories

25

4

GENERAL INFORMATION

INTRODUCTION

This fixture has been designed to perform reliably for years when the information in this

manual are followed. Please read and understand all the instructions and guidelines

carefully and thoroughly before operating this unit. This manual contains important

information regarding safety, installation, use, and maintenance.

UNPACKING

Each fixture has been thoroughly tested and shipped in perfect operating condition.

Carefully check the outer shipping carton for signs of any damage that may have occurred

during shipping. If the outer carton appears to be damaged, carefully inspect the fixture for

damage and be sure all included accessories have arrived intact. In the event damage has

been found and/or parts are missing, please contact our customer support team for further

instructions. Please do NOT return this fixture to your dealer without first contacting

customer support at the number listed below. Please do NOT discard the outer shipping

carton in the trash. Please recycle whenever possible.

CUSTOMER SUPPORT

Contact ELATION Service for any product related service and support needs.

Also visit forums.elationlighting.com with questions, comments or suggestions.

ELATION SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

323-582-3322 | Fax 323-832-9142 | support@elationlighting.com

ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET

+31 45 546 85 63 | Fax +31 45 546 85 96 | sup[email protected]

REPLACEMENT PARTS please visit parts.elationlighting.com

IMPORTANT NOTICE!

THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT.

DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR

MANUFACTURES WARRANTY. D A M A G E S R E S U LT I N G FROM MODIFICATIONS TO

THIS FIXTURE AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND

GUIDELINES IN THIS MANUAL VOID THE MANUFACTURES WARRANTY AND ARE

NOT SUBJECT TO ANY WARRANTY CLAIMS AND/OR REPAIRS.

5

LIMITED WARRANTY (USA ONLY)

A. Elation Professional hereby warrants, to the original purchaser, Elation Professional products to be free of

manufacturing defects in material and workmanship for a period of two years (730 days), and Elation

Professional product rechargeable batteries to be free of manufacturing defects in material and workmanship for

a period of six months (180 days), from the original date of purchase. This warranty excludes discharge lamps

and all product accessories. This warranty shall be valid only if the product is purchased within the United

States of America, including possessions and territories. It is the owner’s responsibility to establish the date and

place of purchase by acceptable evidence, at the time service is sought. B. For warranty service, send the

product only to the Elation Professional factory. All shipping charges must be pre-paid. If the requested repairs

or service (including parts replacement) are within the terms of this warranty, Elation Professional will pay return

shipping charges only to a designated point within the United States. If any product is sent, it must be shipped

in its original package and packaging material. No accessories should be shipped with the product. If any

accessories are shipped with the product, Elation Professional shall have no liability what so ever for loss and/or

or damage to any such accessories, nor for the safe return thereof. C. This warranty is void if the product serial

number and/or labels are altered or removed; if the product is modified in any manner which Elation Professional

concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by

anyone other than the Elation Professional factory unless prior written authorization was issued to purchaser by

Elation Professional; if the product is damaged because not properly maintained as set forth in the product

instructions, guidelines and/or user manual. D. This is not a service contract, and this warranty does not include

any maintenance, cleaning or periodic check-up. During the periods as specified above, Elation Professional will

replace defective parts at its expense, and will absorb all expenses for warranty service and repair labor by

reason of defects in material or workmanship. The sole responsibility of Elation Professional under this warranty

shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of

Elation Professional. All products covered by this warranty were manufactured after January 1, 1990, and bare

identifying marks to that effect. E. Elation Professional reserves the right to make changes in design and/or

performance improvements upon its products without any obligation to include these changes in any products

theretofore manufactured. F. No warranty, whether expressed or implied, is given or made with respect to any

accessory supplied with the products described above. Except to the extent prohibited by applicable law, all

implied warranties made by Elation Professional in connection with this product, including warranties of

merchantability or fitness, are limited in duration to the warranty periods set forth above. And no warranties,

whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after

said periods have expired. The consumer’s and/or dealer’s sole remedy shall be such repair or replacement as is

expressly provided above; and under no circumstances shall Elation Professional be liable for any loss and/or

damage, direct and/or consequential, arising out of the use of, and/or the inability to use, this product. G. This

warranty is the only written warranty applicable to Elation Professional products and supersedes all prior

warranties and written descriptions of warranty terms and conditions heretofore published.

WARRANTY RETURNS

All returned service items whether under warranty or not, must be freight pre-paid and accompany a return

authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A

brief description of the problem as well as the R.A. number must also be written down on a piece of paper and

included in the shipping container. If the unit is under warranty, you must provide a copy of your proof of

purchase invoice. Items returned without a R.A. number clearly marked on the outside of the package will be

refused and returned at customer’s expense. You may obtain a R.A. number by contacting customer support.

6

SAFETY GUIDELINES

To guarantee a smooth operation, it is important to follow all instructions and guidelines in

this manual. Elation Professional is not responsible for injury and/or damages resulting from

the misuse of this fixture due to the disregard of the information printed in this manual. Only

qualified and/or certified personnel should perform installation of this fixture and only the

original rigging parts included with this fixture should be used for installation. Any

modifications to the fixture and/or the included mounting hardware will void the original

manufactures warranty and increase the risk of damage and/or personal injury.

PROTECTION CLASS 1 - FIXTURE MUST BE PROPERLY GROUNDED

THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT.

DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID

YOUR MANUFACTURES WARRANTY. DAMAGES RESULTING FROM

MODIFICATIONS TO THIS FIXTURE AND/OR THE DISREGARD OF

SAFETY INSTRUCTIONS AND GUIDELINES IN THIS MANUAL VOID

THE MANUFACTURES WARRANTY AND ARE NOT SUBJECT TO ANY

WARRANTY CLAIMS AND/OR REPAIRS.

DO NOT PLUG FIXTURE INTO A DIMMER PACK!

NEVER OPEN THIS FIXTURE WHILE IN USE!

UNPLUG POWER BEFORE SERVICING FIXTURE!

NEVER TOUCH FIXTURE DURING OPERATION, AS IT MAY BE HOT!

KEEP FLAMMABLE MATERIALS AWAY FROM FIXTURE!

ENSURE ALL CONNECTIONS AND END CAPS ARE PROPERLY

SEALED WITH A DIELECTRIC GREASE (AVAILABLE AT MOST

ELECTRICAL SUPPLIERS) TO PREVENT WATER CORROSION

AND/OR ELECTRICAL SHORT CIRCUIT.

NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE!

RETINA INJURY RISK - MAY INDUCE BLINDNESS!

SENSITIVE PERSONS MAY SUFFER AN EPILEPTIC SHOCK!

7

SAFETY GUIDELINES

DO NOT TOUCH the fixture housing during operation. Turn OFF the power and allow

approximately 15 minutes for the fixture to cool down before serving.

DO NOT shake fixture, avoid brute force when installing and/or operating fixture.

DO NOT operate fixture if the power/data cables are frayed, crimped, damaged and/or if

any of the connectors are damaged and do not insert into the fixture securely with ease.

NEVER force a power/data cable connector into the fixture. If the power/data cable or any

of its connectors are damaged, replace it immediately with a new one.

DO NOT block the air value on the bottom of the fixture.

This must remain clean and never blocked.

When installing fixture in a suspended environment, always use mounting hardware that is no

less than M10 x 25 mm, and always install fixture with an appropriately rated safety cable.

ALWAYS disconnect fixture from main power source before performing any type of service

and/or cleaning procedure.

NEVER pull out the power/data cable by tugging the wire portion of the cable.

Consistent operational breaks will ensure the fixture will function properly for many years.

ONLY Use the original packaging and materials to transport the fixture in for service.

8

MAINTENANCE GUIDELINES

DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!

CLEANING

Frequent cleaning is recommended to insure proper function, optimized light output, and

an extended life. The frequency of cleaning depends on the environment in which the

fixture operates: damp, smoky or particularly dirty environments can cause greater

accumulation of dirt on the fixture’s optics. Clean the external lens surface at least every 20

days with a soft cloth to avoid dirt/debris accumulation.

NEVER use alcohol, solvents, or ammonia-based cleaners.

MAINTENANCE

Regular inspections are recommended to insure proper function and extended life.

There are no user serviceable parts inside this fixture, please refer all other service issues to

an authorized Elation service technician. Should you need any spare parts, please order

genuine parts from your local Elation dealer.

Please refer to the following points during routine inspections:

A detailed electric check by an approved electrical engineer every three months to make sure

the circuit contacts are in good condition and prevent overheating.

Be sure all screws, fasteners, and clamp bolts are securely tightened at all times. Lose screws

may fall out during normal operation resulting in damage or injury as larger parts could fall.

Check for any deformations on the housing, lens covers, rigging hardware and rigging

points (ceiling, suspension, trussing). Deformations in the housing could allow for dust to

enter into the fixture. Damaged rigging points or unsecured rigging could cause the fixture

to fall and seriously injure a person(s).

Power/data cables must not show any damage, material fatigue or sediments.

9

FIXTURE OVERVIEW

1. Magnetic End Cap

2. Power/Data INPUT (see Optional Accessories for cable part numbers)

3. Sliding Position Adjustable 3-Hole Mounting Yoke (Pixel Bar 120IP includes 2)

4. Safety Cable Attachment Loop

5. Power/Data OUTPUT (see Optional Accessories for cable part numbers)

6. Magnetic End Cap

INCLUDED ITEMS

PIXEL BAR IP

2 ft (0.6m) 4pin 16AWG Power/Data Jumper Cable

Frosted Square Lens Cover

Frosted Round Lens Cover

10

INSTALLATION GUIDELINES

IP65 RATED

An IP rated lighting fixture is one, which is commonly installed in outdoor environments and

has been designed with an enclosure that effectively protects the ingress (entry) of external

foreign objects such as dust and water. The International Protection (IP) rating system is

commonly expressed as "IP" (Ingress Protection) followed by two numbers (i.e. IP65)

where the numbers define the degree of protection. The first digit (Foreign Bodies

Protection) indicates the extent of protection against particles entering the fixture and the

second digit (Water Protection) indicates the extent of protection against water entering the

fixture. An IP65 rated lighting fixture is one, which has been designed and tested to protect

against the ingress of dust (6) and high-pressure water jets from any direction (5).

MARINE/COASTAL ENVIRONMENT INSTALLATIONS

Please note although this fixture is IP rated, the fixture is NOT suitable for marine and/or

coastal environment installations. Installing this fixture in a marine and/or coastal

environment may cause corrosion and/or excessive wear to the interior and/or exterior

components of the fixture. Damages and/or performance issues resulting from installation

in a marine and/or coastal environment will void the manufactures warranty and will NOT

be subject to any warranty claims and/or repairs.

OPTIONAL CORROSION-RESISTANT COATING

Optional Corrosion-Resistant Coatings may be available for this fixture.

Please contact Elation Professional for more details.

FLAMMABLE MATERIAL WARNING

Keep fixture minimum 5.0 feet (1.5m) away from flammable materials and/or pyrotechnics.

ELECTRICAL CONNECTIONS

A qualified electrician should be used for all electrical connections and/or installations.

ENSURE ALL CONNECTIONS AND END CAPS ARE PROPERLY SEALED WITH A

NON-CONDUCTIVE DIELECTRIC GREASE (AVAILABLE AT MOST ELECTRICAL

SUPPLIERS) TO PREVENT WATER INGRESS/CONDENSATION AND/OR

CORROSION.

TO MAINTAIN IP65 RATING INTEGRITY AND PREVENT WATER FROM

ENTERING THE FIXTURE, ALL UNUSED CONNECTION RUBBER CAPS MUST

BE INSERTED/SEALED.

11

INSTALLATION GUIDELINES

DO NOT INSTALL THE FIXTURE IF YOU ARE NOT QUALIFIED TO DO SO!

Fixture MUST be installed following all local, national, and country commercial electrical

and construction codes and regulations.

Before rigging/mounting a single fixture or multiple interconnected fixtures for custom

matrix designs to any metal truss/structure or placing the fixture(s) on any surface, a

professional equipment installer MUST be consulted to determine if the metal

truss/structure or surface is properly certified to safely hold the combined weight of the

fixture(s), clamps, cables, and accessories.

Fixture ambient operating temperature range is 14° to 113°F. (-10° to 45°C)

Do not use the fixture under or above this temperature.

Fixture(s) should be installed in areas outside walking paths, seating areas, or away from

areas were unauthorized personnel might reach the fixture by hand.

NEVER stand directly below the fixture(s) when rigging, removing or servicing.

Overhead fixture installation must always be secured with a secondary safety attachment,

such as an appropriately rated safety cable that meets all local, national, and country codes

and regulations. Allow approximately 15 minutes for the fixture to cool down before serving.

MOUNTING YOKE

This fixture includes an adjustable sliding position mounting yoke and safety cable rigging

point attached to the fixture. (see the illustration below) (Pixel Bar 120IP includes 2 yokes)

To adjust the mounting yoke to a desired position, loosen thumb screw, move the yoke to

the desired position, then tighten the thumb screw securely.

DO NOT OVER TIGHTEN THE THUMB SCREW!

SURFACE MOUNTING

The fixture can be mounted to a flat surface via the mounting yoke using appropriate

mounting hardware (not included). Use careful planning when surface mounting fixtures to

allow ample space for power/data cables.

12

INSTALLATION GUIDELINES

TRUSS MOUNTING

The fixture can be attached to truss or a like structure via the mounting yoke using an

appropriated truss clamp (not included) and an M10 screw (not included).

RIGGING

Overhead rigging requires extensive experience, including amongst others calculating

working load limits, installation material being used, and periodic safety inspection of all

installation material and the fixture. If you lack these qualifications, do not attempt the

installation yourself. Improper installation can result in bodily injury.

INSTALLATION LOCATION PLANNING

Use careful planning to select installation locations of PIXEL BAR IP unit(s). The maximum

distance from the PIXEL DRIVER 4000 to the first pixel bar can NOT exceed 50 feet (18m).

END-TO-END ALIGNMENT

The fixture includes magnetic end caps on both sides which allows seamless end-to-end

linear alignment of multiple units. (see image below) Each fixture MUST be securely

attached/installed using one of the methods mentioned above.

THIS FEATURE IS FOR ALIGNMENT PURPOSES ONLY!

SAFETY'CABLE'

RIGG ING'POINT'

SAFETY'CABLE'

ALW AY S ' AT TACH'A'S AF E TY' CABL E 'WHENEVER'

INST ALL ING'THIS'DEVI CE'IN'A'

SUSPENDED'ENVIRONME NT'TO'ENSURE 'THE'

FIXTUR E 'WILL' N OT'DROP' I F'THE' CL AM P' FAILS.!

13

INSTALLATION GUIDELINES

DIFFUSER LENS COVERS

Square and rounded edge diffuser lens covers are included. These can be attached to the

fixture by aligning the lens to the grooves on both sides of the fixture, starting on one end of

the fixture and then carefully sliding the lens over the length of the top cover.

It is best to attach the frosted lens covers before mounting the fixture.

FOR OVERHEAD RIGGING INSTALLATIONS, IT IS SUGGESTED TO APPLY

SMALL BEADS OF SILCONE GLUE ALONG BOTH SIDES OF THE

DIFFUSER LENS AND FIXTURE TO PREVENT THE POSSIBILITY OF THE

LENS DETACHING/FALLING!

ROUND'

DIFFUSE R'LENS'

SQUARE'

DIFFUSE R'LENS'

14

CONNECTIONS AND CABLES

CONNECTIONS

The fixture features IP65 rated 4pin power/data combination input and output connections.

The wiring diagram below provides the pin details.

TO MAINTAIN IP65 RATING INTEGRITY AND PREVENT WATER FROM

ENTERING THE FIXTURE, ALL UNUSED CONNECTION RUBBER CAPS

MUST BE INSERTED/SEALED.

ENSURE ALL CONNECTIONS AND END CAPS ARE PROPERLY SEALED

WITH A DIELECTRIC GREASE (AVAILABLE AT MOST ELECTRICAL

SUPPLIERS) TO PREVENT WATER CORROSION AND/OR ELECTRICAL

SHORT CIRCUIT.

PIN #1 - (+) Power

PIN #2 - Data

PIN #3 - CLK (clock pin)

PIN #4 - (-) Power

CABLES

ELATION P BAR IP 4pin 16AWG power/data cables are available in various lengths.

See Optional Accessories for details.

MAXIMUM CABLE DISTANCES – 16AWG

The following maximum cable distances apply when using 16AWG cables.

PIXEL DRIVER 4000 to 1

st

PIXEL BAR IP = Maximum 50 feet (18 meters)

PIXEL BAR IP to PIXEL BAR IP = Maximum 32 feet (10 meters)

Total combined length of cables can NOT exceed = Maximum 98 feet (30 meters)

MAXIMUM CABLE DISTANCES – 12AWG

The following maximum cable distances apply when using 12AWG cables.

PIXEL DRIVER 4000 to 1

st

PIXEL BAR IP = Maximum 50 feet (18 meters)

PIXEL BAR IP to PIXEL BAR IP = Maximum 32 feet (10 meters)

Total combined length of cables can NOT exceed = Maximum 213 feet (65 meters)

15

LINKING AND CONTROL

LINKING

Maximum pixels/bars each PIXEL DRIVER 4000

!

supports is listed in charts below.

Multiple combinations of PIXEL BAR IP models can be linked (daisy-chained) together to a

single driver port, providing the maximum number of pixels/bars is NOT exceeded.

KLING-NET = 1,020 Max Pixels per PIXEL DRIVER 4000 Port

Art-NET/sACN = 170 Max Pixels per PIXEL DRIVER 4000 Port

MODEL'

TOTAL'

PIXELS'

TOTAL'

CONTROL'

CHANN ELS'

KLING;NET'

1,020'Max'Pix els'pe r'Drive r'Port'

4,080'Max'Pix els'pe r'Drive r'Unit'

MAX'BARS'

per'

DRIVER'PORT'

MAX'PIXELS '

per'

DRIVER'PORT'

MAX'BARS'

per' '

DRIVER'UNIT'

MAX'PIXELS'

per' '

DRIVER'UNIT'

PIXEL'BAR'30IP'

30!

90!

34!

1020!

136!

4080!

PIXEL'BAR'60IP'

60!

180!

17!

1020!

68!

4080!

PIXEL'BAR'120IP'

120!

360!

8!

960!

32!

3840!

MODEL'

TOTAL'

PIXELS'

TOTAL'

CONTROL'

CHANN ELS'

ART;NET / sACN'

170'Max'Pix els'per' Driver'Port'

680'Max'Pix els'per' Driver'Unit'

MAX'BARS'

per' '

DRIVER'PORT'

MAX'PIXELS'

per'

DRIVER'PORT'

MAX'BARS'

per' '

DRIVER'UNIT'

MAX'PIXELS'

per'

DRIVER'UNIT'

PIXEL'BAR'30IP'

30!

90!

5!

150!

20!

600!

PIXEL'BAR'60IP'

60!

180!

2!

120!

8!

480!

PIXEL'BAR'120IP'

120!

360!

1!

120!

4!

480!

CONTROL

The PIXEL DRIVER 4000 (sold separately) which supports Kling-NET, Art-NET, and sACN

protocols, controls the PIXEL BAR IPs. (see PIXEL DRIVER 4000 manual for details)

16

DMX CHANNEL FUNCTIONS AND VALUES

ELATION PIXEL BAR 30IP / 60IP / 120IP

DMX Channel Values / Functions (90 / 180 / 360 DMX Channels)

PIXEL&BAR&30IP &

PIXEL&BAR&60IP &

PIXEL&BAR&120IP&

VAL UE&

FUNCTION&

1

0-255

RED

2

0-255

GREEN

3

0-255

BLUE

4

0-255

RED

5

0-255

GREEN

6

0-255

BLUE

7

0-255

RED

8

0-255

GREEN

9

0-255

BLUE

10

0-255

RED

11

0-255

GREEN

12

0-255

BLUE

13

0-255

RED

14

0-255

GREEN

15

0-255

BLUE

16

0-255

RED

17

0-255

GREEN

18

0-255

BLUE

19

0-255

RED

20

0-255

GREEN

21

0-255

BLUE

22

0-255

RED

23

0-255

GREEN

24

0-255

BLUE

25

0-255

RED

26

0-255

GREEN

27

0-255

BLUE

28

0-255

RED

29

0-255

GREEN

30

0-255

BLUE

31

0-255

RED

32

0-255

GREEN

33

0-255

BLUE

34

0-255

RED

36

35

0-255

GREEN

36

0-255

BLUE

37

0-255

RED

38

0-255

GREEN

39

0-255

BLUE

40

0-255

RED

41

0-255

GREEN

42

0-255

BLUE

43

0-255

RED

44

0-255

GREEN

45

0-255

BLUE

17

PIXEL&BAR&30IP &

PIXEL&BAR&60IP&

PIXEL&BAR&120IP&

VAL UE&

FUNCTION&

46

0-255

RED

47

0-255

GREEN

48

0-255

BLUE

49

0-255

RED

50

0-255

GREEN

51

0-255

BLUE

52

0-255

RED

53

0-255

GREEN

54

0-255

BLUE

55

0-255

RED

56

0-255

GREEN

57

0-255

BLUE

58

0-255

RED

59

0-255

GREEN

60

0-255

BLUE

61

0-255

RED

62

0-255

GREEN

63

0-255

BLUE

64

0-255

RED

65

0-255

GREEN

66

0-255

BLUE

67

0-255

RED

68

0-255

GREEN

69

0-255

BLUE

70

0-255

RED

71

0-255

GREEN

72

0-255

BLUE

73

0-255

RED

74

0-255

GREEN

75

0-255

BLUE

76

0-255

RED

77

0-255

GREEN

78

0-255

BLUE

79

0-255

RED

80

0-255

GREEN

81

0-255

BLUE

82

0-255

RED

83

0-255

GREEN

84

0-255

BLUE

85

0-255

RED

86

0-255

GREEN

87

0-255

BLUE

88

0-255

RED

89

0-255

GREEN

90

0-255

BLUE

18

&&

PIXEL&BAR&60IP &

PIXEL&BAR&120IP&

VAL UE&

FUNCTION&

&

91

0-255

RED

92

0-255

GREEN

93

0-255

BLUE

94

0-255

RED

95

0-255

GREEN

96

0-255

BLUE

97

0-255

RED

98

0-255

GREEN

99

0-255

BLUE

100

0-255

RED

101

0-255

GREEN

102

0-255

BLUE

103

0-255

RED

104

0-255

GREEN

105

0-255

BLUE

106

0-255

RED

107

0-255

GREEN

108

0-255

BLUE

109

0-255

RED

110

0-255

GREEN

111

0-255

BLUE

112

0-255

RED

113

0-255

GREEN

114

0-255

BLUE

115

0-255

RED

116

0-255

GREEN

117

0-255

BLUE

118

0-255

RED

119

0-255

GREEN

120

0-255

BLUE

121

0-255

RED

122

0-255

GREEN

123

0-255

BLUE

124

0-255

RED

125

0-255

GREEN

126

0-255

BLUE

127

0-255

RED

128

0-255

GREEN

129

0-255

BLUE

130

0-255

RED

131

0-255

GREEN

132

0-255

BLUE

133

0-255

RED

134

0-255

GREEN

135

0-255

BLUE

19

&&

PIXEL&BAR&60IP &

PIXEL&BAR&120IP&

VAL UE&

FUNCTION&

&

136

0-255

RED

137

0-255

GREEN

138

0-255

BLUE

139

0-255

RED

140

0-255

GREEN

141

0-255

BLUE

142

0-255

RED

143

0-255

GREEN

144

0-255

BLUE

145

0-255

RED

146

0-255

GREEN

147

0-255

BLUE

148

0-255

RED

149

0-255

GREEN

150

0-255

BLUE

151

0-255

RED

152

0-255

GREEN

153

0-255

BLUE

154

0-255

RED

155

0-255

GREEN

156

0-255

BLUE

157

0-255

RED

158

0-255

GREEN

159

0-255

BLUE

160

0-255

RED

161

0-255

GREEN

162

0-255

BLUE

163

0-255

RED

164

0-255

GREEN

165

0-255

BLUE

166

0-255

RED

167

0-255

GREEN

168

0-255

BLUE

169

0-255

RED

170

0-255

GREEN

171

0-255

BLUE

172

0-255

RED

173

0-255

GREEN

174

0-255

BLUE

175

0-255

RED

176

0-255

GREEN

177

0-255

BLUE

178

0-255

RED

179

0-255

GREEN

180

0-255

BLUE

20

&&

PIXEL&BAR&120IP&

VAL UE&

FUNCTION&

&

181

0-255

RED

182

0-255

GREEN

183

0-255

BLUE

184

0-255

RED

185

0-255

GREEN

186

0-255

BLUE

187

0-255

RED

188

0-255

GREEN

189

0-255

BLUE

190

0-255

RED

191

0-255

GREEN

192

0-255

BLUE

193

0-255

RED

194

0-255

GREEN

195

0-255

BLUE

196

0-255

RED

197

0-255

GREEN

198

0-255

BLUE

199

0-255

RED

200

0-255

GREEN

201

0-255

BLUE

202

0-255

RED

203

0-255

GREEN

204

0-255

BLUE

205

0-255

RED

206

0-255

GREEN

207

0-255

BLUE

208

0-255

RED

209

0-255

GREEN

210

0-255

BLUE

211

0-255

RED

212

0-255

GREEN

213

0-255

BLUE

214

0-255

RED

215

0-255

GREEN

216

0-255

BLUE

217

0-255

RED

218

0-255

GREEN

219

0-255

BLUE

220

0-255

RED

221

0-255

GREEN

222

0-255

BLUE

223

0-255

RED

224

0-255

GREEN

225

0-255

BLUE

Page is loading ...

Elation PIXEL BAR 30IP User manual

This manual is also suitable for

Elation PIXEL BAR 30IP User manual

Related papers

Other documents