ESAB MEE 30 is a wire feed unit designed for use with semi-automatic welding machines. It provides the pushing action for the electrode wire, while the pulling action is provided by the feeder drive fitted in the welding gun. This "Push-Pull" system is particularly useful when using hard-to-feed wires, such as soft aluminum wire, or when using long hoses (up to 16 m).
The MEE 30 is compatible with the PAC 8 crater filling unit, the PAA 6 long pulse unit, and the PAB 6 programming unit. It features a solenoid valve for shielding gas, two multi-pole cable connectors, and three switches.
ESAB MEE 30 is a wire feed unit designed for use with semi-automatic welding machines. It provides the pushing action for the electrode wire, while the pulling action is provided by the feeder drive fitted in the welding gun. This "Push-Pull" system is particularly useful when using hard-to-feed wires, such as soft aluminum wire, or when using long hoses (up to 16 m).
The MEE 30 is compatible with the PAC 8 crater filling unit, the PAA 6 long pulse unit, and the PAB 6 programming unit. It features a solenoid valve for shielding gas, two multi-pole cable connectors, and three switches.
-
1
-
2
-
3
-
4
-
5
-
6
ESAB MEE 30 is a wire feed unit designed for use with semi-automatic welding machines. It provides the pushing action for the electrode wire, while the pulling action is provided by the feeder drive fitted in the welding gun. This "Push-Pull" system is particularly useful when using hard-to-feed wires, such as soft aluminum wire, or when using long hoses (up to 16 m).
The MEE 30 is compatible with the PAC 8 crater filling unit, the PAA 6 long pulse unit, and the PAB 6 programming unit. It features a solenoid valve for shielding gas, two multi-pole cable connectors, and three switches.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
