FMI LV43DS Operating instructions

Draft Shield Kit Installation Instructions Model: LV43DS

For use with (V)LVF43 Series Models

126451-01

REV. A

10/12

2701 S. Harbor Blvd.

Santa Ana, CA 92704

1-866-328-4537

www.fmiproducts.com

Parts included with these kit:

PART NO. DESCRIPTION LV43DS QTY

126416-01 Kit, Flame Shield • 1

126451-01 Sheet, Instruction • 1

GLASS PANEL INSTALLATION

The glass panel assembly should be installed after the replace is

completely framed and nished. Attached brackets to the front side

face on each side of the replace using two screws as shown in Figure

1. Position the glass panel in the bracket so that it is securely in place.

Glass

Panel

Bracket

Screws

Figure 1 - Installing Glass Panel