Philips DCM3060/93 Quick Installation Guide

Type
Quick Installation Guide
Wall mounting instructions
drill holes on wall at hole
positions marked *
134 mm (5.28")
Note for mounting
To secure the mounting on wall, a concrete wall is required.
Use screws to mount the main unit on the wall
1. Use this sheet as a template. Mark the position of the unit on
the wall (as illustrated above), and then drill two 6mm diameter
holes.
2. Secure the 2 dowels and 2 screws (both supplied) in the holes
respectively. Leave a gap of 5 mm between the head of the
screw and the wall.
3. Hang the unit on the screws.
ENGLISH
安装注意事项
要在墙上稳固安装,需要混凝土墙壁。
使用螺丝,将主装置安装在墙上
1. 使用此纸板作为模板。 在墙上标记装置的位置(如上述所
示),然后钻两个直径为 6 毫米的钻孔。
2. 分别在钻孔稳固 2 颗木钉和 2 颗螺丝(均有提供)。 在螺
丝头与墙壁之间留下 5 毫米的空隙。
3. 将装置挂在螺丝上。
* 挂墙安装说明
于标记的钻孔位置在墙上钻孔
中文
  • Page 1 1

Philips DCM3060/93 Quick Installation Guide

Type
Quick Installation Guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages