Philips DCM3060/93 Quick Installation Guide

Wall mounting instructions

drill holes on wall at hole

positions marked *

134 mm (5.28")

Note for mounting

To secure the mounting on wall, a concrete wall is required.

Use screws to mount the main unit on the wall

1. Use this sheet as a template. Mark the position of the unit on

the wall (as illustrated above), and then drill two 6mm diameter

holes.

2. Secure the 2 dowels and 2 screws (both supplied) in the holes

respectively. Leave a gap of 5 mm between the head of the

screw and the wall.

3. Hang the unit on the screws.

ENGLISH

安装注意事项

要在墙上稳固安装，需要混凝土墙壁。

使用螺丝，将主装置安装在墙上

1. 使用此纸板作为模板。在墙上标记装置的位置（如上述所

示），然后钻两个直径为 6 毫米的钻孔。

2. 分别在钻孔稳固 2 颗木钉和 2 颗螺丝（均有提供）。在螺

丝头与墙壁之间留下 5 毫米的空隙。

3. 将装置挂在螺丝上。

* 挂墙安装说明

于标记的钻孔位置在墙上钻孔

中文

Download PDF