LG M228WA-BM is a versatile display device designed to provide an immersive viewing experience with its advanced features and capabilities. This user-friendly monitor offers a range of input options, including AV, Component, RGB, and DVI, allowing for seamless connectivity with various devices. Its adjustable stand enables optimal positioning for maximum comfort and reduced eye strain. The inclusion of a theft prevention locking device ensures the security of your monitor in public or shared spaces.
LG M228WA-BM is a versatile display device designed to provide an immersive viewing experience with its advanced features and capabilities. This user-friendly monitor offers a range of input options, including AV, Component, RGB, and DVI, allowing for seamless connectivity with various devices. Its adjustable stand enables optimal positioning for maximum comfort and reduced eye strain. The inclusion of a theft prevention locking device ensures the security of your monitor in public or shared spaces.
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached on the product and give the information to your dealer when you ask
for service.
M228WA
User’s Guide
1
Please read these safety precautions carefully before using the product.
Precautions in installing the Product
If you ignore the caution message, you may be slightly injured or the product may be damaged
If you ignore the warning message, you may be seriously injured or there is a possibility of
accident or death.
Keep away from heat sources like electrical heaters.
- Electrical shock, fire, malfunction or deformation may occur.
Keep the packing anti-moisture material or vinyl packing out of the reach of children.
- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the
nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
Do not put heavy objects on the product or sit upon it.
- If the product collapses or is dropped, you may be injured. Children must pay particular attention.
Do not leave the power or signal cable unattended on the pathway.
- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.
Install the product in a neat and dry place.
- Dust or moisture can cause electrical shock, fire or product damage.
If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the
service center.
- If you continue to use without taking proper measures, electrical shock or fire can occur.
If you dropped the product or the case is broken, turn off the product and unplug the power cord.
- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service
center.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable
objects such as paper and matches. Children must pay particular attention.
- Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and
contact the service center.
Make sure the product ventilation hole is not blocked. Install the product in a suitably wide place (more
than 10cm from the wall)
- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
Do not block the ventilation hole of the product by a tablecloth or curtain.
- The product can be deformed or fire can break out due to overheating inside the product.
Install the product on a flat and stable place that has no risk of dropping the product.
- If the product is dropped, you may be injured or the product may be broken.
Install the product where no EMI occurs.
Keep the product away from direct sunlight.
- The product can be damaged.
Safety Precautions
Warning
Warning
Caution
Caution
22
Electrical Power Related Precautions
Make sure to connect the power cable to the grounded current.
- You may be electrocuted or injured.
Use the rated voltage only.
- The product can be damaged, or you may be electrocuted.
During a thunder or lightning storm, unplug the power cable or signal cable.
- You may be electrocuted or a fire can break out.
Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet.
Use a power bar with a grounding terminal designed for exclusive use with the computer.
- A fire can break out due to overheating.
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry
the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
If you don’t intend to use the product for a long time, unplug the power cable from the product.
- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
Fix the power cable completely.
- If the power cable is not fixed completely, a fire can break out.
Hold the plug when pulling out the power cable. Do not bend the power cord with excessive force or put
heavy objects on the power cord.
- The power line can be damaged, which may cause electric shock or fire.
Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is
connected to the input terminal on the wall. Additionally, do not touch the power cable right after
plugging into the wall input terminal.
- You may be electrocuted.
The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily
accessible after installation.
Do not unplug the power cord while the product is in use.
- Electrical shock can damage the product.
Warning
Caution
Precautions in Moving the Product
Warning
Make sure to turn off the product.
- You may be electrocuted or the product can be damaged.
Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged.
Safety Precautions
3
Safety Precautions
Caution
Precautions in Using the Product
Warning
Do not put or store inflammable substances near the product.
- There is a danger of explosion or fire due to careless handling of the inflammable substances.
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent
scratching. Do not clean with a wet cloth.
- The water can sink into the product, which can cause electric shock or serious malfunction.
Take a rest from time to time to protect your vision.
Keep the product clean at all times.
Take a comfortable and natural position when working with a product to relax the muscles.
Take a regular break when working with a product for a long time.
Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make
a scratch on it.
Keep the proper distance from the product.
- Your vision may be impaired if you look at the product too closely.
Set the appropriate resolution and clock by referring to the User’s Guide.
- Your vision can be impaired.
Use authorized detergent only when cleaning the product. (Do not use benzene, thinner or alcohol.)
- Product can be deformed.
Caution
Do not shock the product when moving it.
- You may be electrocuted or the product can be damaged.
Do not dispose the product-packing box. Use it when you move.
Make the panel face forward and hold it with both hands to move.
- If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center
for repair.
Do not disassemble, repair or modify the product at your own discretion.
- Fire or electric shock accident can occur.
- Contact the service center for check, calibration or repair.
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent
scratching. Do not clean with a wet cloth.
Keep the product away from water.
- Fire or electric shock accident can occur.
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
On Disposal
4
Before Connecting to the PC
Connecting the stand
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
1. Place the monitor with its front facing downward on a soft cloth.
2. Connect the Stand Base to the Stand Body and press latches at the button toward each end.
3. Connect the Stand, assembled in step 2, to the Monitor Panel until you hear a "Click".
4. Once assembled take the monitor up carefully and face the front side
Important
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Stand
Slot
3.
Stand Body
Stand Base
2.
5
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -3˚~10˚ Swivel : 350˚
Before Connecting to the PC
Warning:
When adjusting the angle of the screen, do not put your
finger(s) in between the head of the monitor and the stand
body. You can hurt your finger(s).
AUDI O
COMPONENT IN
Locking Device
Use this locking cable
(This has to be purchased
separately if required.
) to prevent theft.
Theft prevention locking device
TV :
Not working
POWER
INPUT
6
Name of the Remote Control Buttons
POWER
TV
INPUT
CH
CH
ENTER
MTS
MUTE
FCR
MENU
REVIEW
MEMORY/ERASE
CAPTION
A.PROG
SLEEP
APC
DASP
ARC/*
VOL
VOL
Number buttons
Able to directly select and change channel.
Name and Function of the Parts
MTS
Not working
A.PROG
PC: Automatic adjustment function (Operational for the analog signal only)
MEMORY/ERASE
Not working
CAPTION
Select a closed caption (AV only)
Input
AV
Component
RGB
DVI
MENU
Each time you press the Input button it will
change to
AV Component RGB DVI.
If nothing is inputted for several seconds the
screen will automatically move to the
selected menu.
1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap.
• Dispose of used batteries in the recycle bin to prevent
environmental pollution.
Inserting batteries into remote control.
CH
CH
ENTER
MUTE
FCR
MENU
REVIEW
SLEEP
APC
DASP
ARC/*
VOL
VOL
7
CH ( ) Buttons
Up and Down Button
VOL ( ) Buttons
Volume Button
ENTER Button
Use when functional adjustment is completed.
MENU
Use this button to enter the On Screen Display menu.
REVIEW
Not working
SLEEP : SLEEP Timer
You can set a time period after which the
AV/ Component should switch itself to standby.
Press the key repeatedly to select the number of minutes.
APC Button
Press repeatedly to select Clear, Optimum, Soft, User picture mode.
DASP Button
Use this button to select the sound tone.
Press repeatedly to select Flat, Music, Movie, Sports, User
sound tone.
ARC
To select the image size of the screen.
•
When AV mode: 16:9, Horizon, Zoom1, Zoom2, 4:3
• When RGB/DVI /Component mode
: 16:9, 4:3
10
20 30
60
240 180
120
90
_ _ _ (off)
Name of the Remote Control Buttons
Name and Function of the Parts
MUTE
Switches the sound on or off.
FCR
Not working
8
Name and Function of the Parts
RGB(PC/DTV) IN
Ext. IN
DVI IN
AUDIO
(RGB/DVI) IN
H/P
S-VIDEO
AV IN
(MONO)
VIDEO
AUDIO
L R
AUDIO
COMPONENT IN
VIDEO
Y
PB PR
L R
RGB(PC/DTV) IN
Ext. IN
DVI IN
AUDIO
(RGB/DVI) IN
H/P
S-VIDEO
AV IN
(MONO)
VIDEO
AUDIO
L R
AUDIO
COMPONENT IN
VIDEO
Y
P
B
P
R
L R
Rear View
Power Connector : Connect the power cord.
Ext In Jack : Connect the TN300 Tuner. (Please refer to TN300 install guide.)
AV Input Terminal
DVI Digital Signal Connector
D-Sub Analog Signal Connector
RGB-PC, DVI-PC Sound Jack : Connect to the jack in the PC sound card or D-TV sound Output Jack.
Headphone/Earphone Connection Terminal
Component Input Terminal
9
AV Input Terminal
S-VIDEO
AV IN
(MONO)
VIDEO
AUDIO
L R
S-Video Input Terminal
Audio Input Terminal
Video Input Terminal
Name and Function of the Parts
10
AUDIO
(RGB/DVI) IN
DVI IN
10
Connecting to your PC
First of all, see if the computer, product and the peripherals are turned off.
Then, connect the signal input cable.
Connecting with the D-Sub signal input cable.
Rear side of the product.
Connecting to External Devices
RGB(PC/DTV) IN
Macintosh Adapter (Not included)
Use the standard Macintosh adapter since an
incompatible adapter is available in the market.
(Different signaling system)
1.
Audio cable
Connecting with the DVI signal input cable.
A
B
2.
Rear side of the product
.
Rear side of the product.
Rear side of the product.
Connect the audio cable.
•
Make sure to check the sound card connection terminal in the PC before connecting to the product.
If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumper
or the PC application. (For more details, refer to the sound card user’s guide.)
- Speaker Out : The terminal connected to the speaker that is not equipped with an amplifier.
- *Line Out : The terminal connected to the speaker equipped with an amplifier.
If Audio Out in the PC sound card has only Speaker Out, reduce the PC volume. This product is integrated
with an amplifier.
RGB(PC/DTV) IN
Ext. IN
DVI IN
AUDIO
(RGB/DVI) IN
H/P
S-VIDEO
AV IN
(MONO)
VIDEO
AUDIO
L R
AUDIO
COMPONENT IN
VIDEO
Y
P
B
P
R
L R
11
• Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
Note
Turn on the PC.
2
1
Rear side of the product.
Connect the power cord.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
Or, press the INPUT button at the top side of the product.
Turn on power by pressing the power button on the product.
Power button
•
Select RGB
RGB(PC/DTV) IN
Ext. IN
DVI I N
AUDIO
(RGB/DVI) IN
H/P
S-VIDEO
AV IN
(MONO)
VIDEO
AUDIO
L R
AUDIO
COMPONENT IN
VIDEO
Y
P
B
P
R
L R
3.
4.
5.
Connecting to External Devices
Input
AV
Component
RGB
DVI
MENU
A
B
•
Select DVI
Input
AV
Component
RGB
DVI
MENU
Each time you press the Input button it will change to AV Component RGB DVI
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
INPUT OK
INPUT OK
12
Connecting to External Devices
When using the RCA cable.
•
Connect the input terminal with a
proper colour match.
When using the S-Video cable.
•
Connect to the S-Video input terminal to
watch high image quality movies.
S-VIDEO
AV IN
(MONO)
VIDEO
AUDIO
L R
VIDEO
OUT
AUDIO
OUT
Rear side of
the Product
RCA Cable
Connect the video/audio cable as shown in the figure below and then connect the power cord (See page 11).
Connecting to VCR/DVD
VCR/DVD
B
A
(Not included)
S-VIDEO
AV IN
(MONO)
VIDEO
AUDIO
L R
VIDEO
OUT
AUDIO
OUT
RCA Cable
S-Video Cable
VCR/DVD
Rear side of
the Product
(Not included)
(Not included)
1.
• In case the RCA cable is connected simultaneously as S-Video cable is connected, S-Video
cable is first.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
Or, press the INPUT button at the top side of the product.
When connecting with a RCA cable.
•
Select AV
When connecting with a S-Video cable.
•
Select AV
B
A
2.
Input
AV
Component
RGB
DVI
MENU
INPUT OK
INPUT OK
Note
Each time you press the Input button it will change to AV Component RGB DVI
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
13
Connecting to External Devices
AUDIO
COMPONENT IN
VIDEO
Y
P
B
P
R
L R
AUDIO
COMPONENT OUT
VIDEO
Y
Pb Pr
L R
Rear side of the Product
Component Cable
Connect the video/audio cable as shown in the figure below and then connect the power
cord (See page 11).
Connecting to Set-top Box /DVD (480i/576i/480p/576p/720p/1080i)
Set-top Box /DVD
•
Connect the input terminal with a proper color match.
(Not included)
1.
Audio Cable
(Not included)
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
Or, press the INPUT button at the top side of the product.
•
Select Component
2.
Input
AV
Component
RGB
DVI
MENU
INPUT OK
INPUT OK
Each time you press the Input button it will change to AV Component RGB DVI
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
14
Connecting to External Devices
Connect the D-sub cable, RCA/PC cable as shown in the below figure
and then connect the power cord. (see page 11)
RGB(PC/DTV) IN
AUDIO
(RGB/DVI) IN
[Rear side of the Product]
[Set-top Box/DVD]
D-Sub cable
RCA-Stereo
cable
(not included)
When watching RGB/DVI from the DVD/Set-top Box
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
Or, press the INPUT button at the top side of the product.
2.
1.
INPUT OK
RGB(PC/DTV) INDVI IN
AUDIO
(RGB/DVI) IN
[Rear side of the Product]
[Set-top Box/DVD]
DVI cable
RCA-Stereo
cable
(not included)
B
A
•
Select RGB
A
•
Select DVI
B
Input
AV
Component
RGB
DVI
MENU
Input
AV
Component
RGB
DVI
MENU
INPUT OK
Each time you press the Input button it will change to AV Component RGB DVI
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
15
To arrange cables using cable management
AV IN 2
(MONO)
VIDEO
L
P
U
S
H
C
A
B
L
EMAN
A
G
EM
E
N
T
(MONO)
VIDEO
L
PUSH
C
A
B
LE M
AN
A
GEMENT
cable
management
1.
2.
Arrange the cables in the center as shown in the following picture.
Fit the cable management to the Holder Groove downward.
Push down slightly.
Warning
• Do not use the cable management as a handle for the Monitor.
• Do not press the cable management.
* When you want remove it.
PUSH
C
A
B
L
E
M
A
N
A
GEMENT
Push up slightly to remove it.
16
Name of the Buttons in the Screen Adjustment Unit
Power Indicator
• Adjust the volume.
• Use this button to show/hide the OSD (On Screen Display) menu
screen.
MENU Button
•
Use
this
button to select an icon or adjust the setting in the
OSD screen.
OSD Select/Adjust Button
Adjusting the Screen
INPUT
MENU
VOL
ENTER
Volume
30
• This Indicator lights up blue when the display operates normally
(On Mode). If the display is in Sleep (Energy Saving) Mode, this
indicator colour changes to amber.
• Use this button to turn the product on and off.
Power Button
RGB(PC/DTV) IN
Ext. IN
DVI IN
AUDIO
(RGB/DVI) IN
H/P
S-VIDEO
AV IN
(MONO)
VIDEO
AUDIO
L R
AUDIO
COMPONENT IN
VIDEO
Y
P
B
P
R
L R
17
Adjusting the Screen
Name of the Buttons in the Screen Adjustment Unit
ENTER Button
AV CVBS, S-Video
Component HDTV, DVD
RGB D-Sub analog signal
DVI DVI Digital signal
INPUT Button
• The unit that receives the signal from the remote control.
IR Receiver
• ENTER button is usually used in choosing the MENU.
When there is no MENU on the screen pushing the ENTER button
will give the information about the current input source.
Input
AV
Component
RGB
DVI
MENU
Each time you press the Input button it will change to AV Component RGB DVI
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
18
OSD(On Screen Display)
The OSD function enables you to adjust the screen status conveniently since it provides graphical
presentation.
Note
OSD (On Screen Display) Menu
Icon Function Description
Picture
Sound
Timer
Adjusting the time function.
Adjusting the screen function.
Adjusting the sound function.
Adjusting the picture function.
Special
Selecting the special function.
Screen
Adjusting the Screen
19
Adjusting the Screen
OSD (On Screen Display) Scree
n Tracking Order
Press the MENU Button, then the main menu of the OSD will appear.
To access a control, use the Buttons.
When the icon you want becomes highlighted, press the ENTER Button.
Use the Buttons to adjust the item to the desired level.
Accept the changes by pressing the ENTER Button.
Exit the OSD by pressing the MENU Button
repeatedly .
1
2
3
4
5
6
•
Use the remote control to adjust the OSD screen.
Pop up the
menu screen
Move where
you want to
adjust
Select a menu icon
Adjust the status
Save
adjustment
Exit from the
menu screen.
MENU
MENU
CH
CH
ENTER
VOL
VOL
CH
CH
ENTER
VOL
VOL
ENTER ENTER
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
LG M228WA-BM is a versatile display device designed to provide an immersive viewing experience with its advanced features and capabilities. This user-friendly monitor offers a range of input options, including AV, Component, RGB, and DVI, allowing for seamless connectivity with various devices. Its adjustable stand enables optimal positioning for maximum comfort and reduced eye strain. The inclusion of a theft prevention locking device ensures the security of your monitor in public or shared spaces.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
LG Electronics 42PM1M User manual
-
-
Zenith P50W38 User manual
-
Zenith P50W38 User manual
-
-
-
-
-
-