Colour Television
OWNER’S MANUAL
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this infor-
mation to your dealer when you require service.
Model number :
Serial number :
P/NO : MFL31619001 (CW62B, 30036801/2/3/4 TX ) c
Contents
Installation 3
Location and function of controls 4
Remote control handset
Battery installation
Front panel / Side panel
Basic operation 8
On and off / Programme selection
Volume adjustment / Quick view
Mute function
On screen language selection (option)
On screen menus 9
Menu selection
Setting up TV stations 10
Auto programme tuning
Manual programme tuning / Fine Tuning
Programme edit / Favourite programme
Calling the programme table
Picture adjustment 16
PSM (Picture Status Memory) /
XD
Eye (option) / Picture adjustment
Sound adjustment 18
SSM (Sound Status Memory)
Turbo sound selection
Sound adjustment / X-WAVE (Wireless Sound) (option)
Sound output selection / Stereo/Dual reception
NICAM reception (option)
Time setting 21
Setting the clock / Setting the On/Off timer
Auto sleep
Other functions 22
TV and AV modes / Auto AV switching (option)
Child lock / Degaussing
Games (option)
/ Sleep timer
PIP operation (option) 25
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change
Teletext (option) 26
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
Connection of external equipment 29
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
Component in sockets (option)
Troubleshooting check list 31
2
Installation
Power
This set operates on an AC mains supply, the voltage is as indicat-
ed on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aer-
ial and mains plugs.
Warning
To prevent fire or shock hazard, do not expose the set to rain or
moisture.
Do not place anything containing liquid on top of the set, this may
cause a fire or could give an electric shock.
Service
Never remove the back cover of the set as this can expose you to
very high voltage and other hazards. If the set does not operate
properly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked
(option)
on the
back cover. For the best reception an outdoor aerial should be
used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
3
Location and function of controls
4
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Remote control handset
Before you use the remote control handset, please install the bat-
teries. See the next page.
1. POWER
switches the set on from standby or off to standby.
2. NUMBER BUTTONS
Switches the set on from standby or directly select a number.
3. MENU
selects a menu.
4.
DD
/
EE
(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
scans programmes automatically.
FF
/
GG
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
OK
accepts your selection or displays the current mode.
5. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
6.
SLEEP
sets the sleep timer.
7. PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/-
selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
(With TELETEXT / PIP)
PR
PR
OK
VOL
VOL
1
2
3
4
6
5
13
7
8
10
11
12
14
PR
PR
OK
VOL
VOL
Q.VIEW LIST
UPDATE/
HOLD/
(With TELETEXT / Without PIP)
5
9
Location and function of controls
5
8. FAVOURITE
selects a favorite programme.
9.
EYE/
*
(option)
switches the eye function on or off.
10. MUTE
switches the sound on or off.
11. TV/AV
selects TV or AV mode.
switches the set on from standby.
exits the Teletext mode
(option)
.
12.
I/II/
*
selects the language during dual language broadcast.
selects the sound output (option).
13. Q.VIEW (or SWAP)
returns to the previously viewed programme.
14.
LIST (or INPUT)
displays the programme table.
*
: No function
COLOURED BUTTONS : These buttons are used for teletext (only
TELETEXT models) or programme edit.
Battery installation
The remote control handset is powered by two AAA type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( and ) marked inside the compartment.
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
+
-
(Without TELETEXT / PIP)
PR
PR
OK
VOL
VOL
(With PIP / Without TELETEXT)
PR
PR
OK
VOL
VOL
Q.VIEW LIST
1
2
3
4
13
6
9
10
11
8
14
7
12
6
Location and function of controls
Front panel
21FS4 series
1 2 3 4
5
21FE6 series
1
2
3
5
4
1 2 3 4 75
21FX4 series
21FD7 series
1 2 3
21FS2 series
1 2 3 4 5
21FD1/4 series
MENU OK
VOL
PR
1 2 3 4 5
21FX5 series
2 3 54
1
7
21FC1 series
MENU
OK
VOL
PR
1 2 3 4 5
4
5
21FB9 series
1 2 3 4 5
7
21FB3 series
ON/OFF
MENU OK
VOL PR
VIDEO AUDIO
VIDEO AUDIO
L/MONO
R
AV IN2
1 2 3 4 65 6
ON/OFF
MENU
OK
VOL PR
VIDEO
AUDIO
L
R
AV IN2
21FB5 series
2 3 4 5
1
7
6
21FA3 series
ON/OFF
MENU OK VOL PR
L/MONO
AV IN2
1
3 4
5
6
2
21CC2 series
1
2
3
5
4
21FS6 series
1
2
3
5
4
Location and function of controls
7
1. MAIN POWER (ON/OFF)
switches the set on or off.
2. POWER/STANDBY INDICATOR
illuminates brightly when the set is in standby
mode.
dims when the set is switched on.
3. REMOTE CONTROL SENSOR
Note : Only use the supplied remote control
handset. (When you use others, they won’t be
able to function.)
4. MENU
(option)
selects a menu.
5. OK
(option)
accepts your selection or displays the current
mode.
FF
/
GG
(Volume Up/Down) (option)
adjusts the volume.
adjusts menu settings.
DD
/
EE
(Programme Up/Down) (option)
selects a programme or a menu item.
switches the set on from standby.
6. AUDIO (or AUDIO-L/R)/VIDEO IN SOCKETS
(AV IN2) (option)
Connect the audio/video out sockets of external
equipment to these sockets.
7. EYE (option)
adjusts picture according to the surrounding
conditions.
Note : Shown is a simplified representation of front
or side panel. What is shown here may be
somewhat different from your set or can not be
supplied on your area.
Side panel
VIDEO
L/MONO
RAUDIO
6
6
MENU
VOL
OK
PR
POWER
15Q9 series
1
2
3
5
4
6
6
6 6
7
1
15/21FC2 series
2
4 53
1
21FG1 series
2
4 53
ON/OFF
MENU
OK VOL
PR
21FJ4 series
1
2
4
5
3
Basic operation
8
On and off
1. Press the main power button to switch the set on.
2. If the set is in standby mode, press the POWER,
DD
/
EE
, TV/AV
or NUMBER buttons on the remote control handset to switch it
on fully.
3. Press the POWER button on the remote control handset.
The set reverts to standby mode.
4. Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is discon-
nected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme selection
You can select a programme number with the
DD
/
EE
or NUMBER
buttons.
Volume adjustment
Press the
FF
/
GG
button to adjust the volume.
Q.VIEW (or SWAP)
Press the Q.View (or SWAP) button to view the last programme
you were watching.
Mute function
Press the MUTE button. The sound is switched off and the display
W
appears.
You can cancel it by pressing the MUTE,
FF
/
GG
, I/II/
*
(option), button.
On screen language selection(option)
The menu can be displayed on the screen in desired language.
First select your language.
1. Press the MENU button and then
DD
/
EE
button to select the
Special menu.
2. Press the
GG
button to select Language.
3. Press the
GG
button and then
DD
/
EE
button to select your desired
language.
All the on screen displays will appear in the selected language.
Press the OK or
FF
button to select the Special menu.
4. Repeatedly press the MENU button to return to normal TV
viewing.
The dialogue between you and your set takes place on screen with
an operator menu. The buttons required for the operating steps are
also displayed.
Menu selection
1. Press the MENU button and then
DD
/
EE
button to display each
menu.
2. Press the
GG
button and then
DD
/
EE
button to select a menu item.
3. Press the
GG
button to display the sub menu or the pull-down
menu.
4. Change the setting of an item in the sub or pull-down menu with
the
FF
/
GG
or
DD
/
EE
.
You can move to the higher level menu with the OK or
FF
but-
ton and to move to the lower level menu press the
GG
button.
Note :
a. In the teletext mode, menus are not displayed.
b. In some models, the
Normal/Turbo search will not display,
only the
Start will display in the Auto programme menu.
c. In some models, Game, Booster or Degauss will not display.
d. In some models, the Language, X-WAVE will not display.
On screen menus
9
TV programme
Auto
O
programme {
Manual
O
programme {
Program me
O
edit {
FavouriteOprogramme
{
()O}{OOKOMENU
System {
StorageO from {
NormalO search {
TurboO search {
0OOARO1DOOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOOCopy
MoveOOOOOOSkip
O0OOCO03
Picture menu
Station menu
PSM {
XD {
Contrast {
Brightness {
Colour {
Sharpness {
()O}{OOKOMENU
Sound menu
()O}{OOKOMENU
Special menu
()O}{OOKOMENU
Time menu
()O}{OOKOMENU
()O}{OOKOMENU
Storage {
System {
Channel {
Fine {
Search {
Name {
()O}{OOKOMENU
()} {OOKOMENU
System {
Storage {
Station
Picture
Sound
Time
Special
Auto programme
Manual programme
Programme edit
BG
I
DK
M
2
SSM {
Turbo oSound {
AVL {
Balance {
X-WAVE {
Clock {
Offotime {
Onotime {
Autoosleep {
Language {
Input {
Childolock {
Degauss {
Game {
PR
PR
OK
VOL
VOL
10
Setting up TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the
DD
/
EE
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note : In some models up to 200 TV stations can be stored.
Auto programme tuning
All stations that can be received are stored by this method. It is rec-
ommended that you use auto programme during installation of this set.
1. Press the MENU button to select the Station menu.
2. Press the
GG
button and then
DD
/
EE
button to select Auto pro-
gramme
.
3. Press the
GG
button to display the Auto programme menu.
4. Press the
GG
button. Select a TV system with the
DD
/
EE
button
on the
System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I : (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M : (USA/Korea/Philippines) (option)
5. Press the
FF
button.
6. Press the
DD
/
EE
button to select Storage from.
7. Press the
GG
button. Select the beginning programme number
with the
FF
/
GG
button or NUMBER buttons on the Storage
from
pull-down menu. Any number under 10 is entered with a
numeric ‘0’ (or ‘00’) in front of it, i.e. ‘05’ (or ‘005’) for 5.
8. Press the OK button.
9. Press the
DD
/
EE
button to select Normal or Turbo search.
Option: In some models, you can only select Start.
Note :
a.
Turbo search is faster than Normal search and in some mod-
els, these searches will automatically store all receivable stations.
b. If the programmed station has poor quality and sound, select
the system again in the Manual programme menu.
10. Press the
GG
button to begin auto programming.
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the ‘Programme edit’ section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
System
{
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
BG
I
DK
M
System
{
()O}{OOKOMENU
Auto programme
System {
System
{
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
MENU
Auto programme
MENU
OOCO01O(BG)
736%
Normal search
PR
PR
OK
VOL
VOL
Auto
O
programme {
Manual
O
programme {
Program me
O
edit {
FavouriteOprogramme {
()O}{OOKOMENU
Station
Setting up TV stations
Manual programme tuning
Manual programme lets you manually tune and arrange the sta-
tions in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1. Press the MENU button to select the Station menu.
2. Press the
GG
button and then
DD
/
EE
button to select Manual
programme
.
3. Press the
GG
button to display the Manual programme
menu.
4. Press the
DD
/
EE
button to select Storage.
5. Press the
GG
button to select the programme number. Select the
desired programme number (0 to 99) with the
FF
/
GG
button or
NUMBER buttons on the Storage pull-down menu. Any num-
ber under 10 is entered with a numeric ‘0’
(or ‘00’)
in front of it,
i.e. ‘05’
(or ‘005’)
for 5.
6. Press the OK button.
7. Press the
DD
/
EE
button to select System.
8. Press the
GG
button. Select a TV system with the
DD
/
EE
button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I : (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M : (USA/Korea/Philippines) (option)
9. Press the OK or
FF
button.
10. Press the
DD
/
EE
button to select Channel.
11. Press the
GG
button. Press the
DD
/
EE
button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric ‘0’
(or
‘
00’)
in front of it, i.e. ‘05’
(or ‘005’)
for 5.
12. Press the OK or
FF
button.
13. Press the
DD
/
EE
button to select Search.
14. Press the
GG
button. Press the
FF
/
GG
button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
15. Press the OK button to store it. The display Stored will appear.
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
viewing.
11
Storage {
System {
Channel {
Fine {
Search {
Name {
2
Storage {
()O}{OOKOMENU
Manual programme
Storage {
System {
Channel {
Fine {
Search {
Name {
Stored
Manual programme
{{{
PR
PR
OK
VOL
VOL
Auto
O
programme {
Manual
O
programme {
Program me
O
edit {
FavouriteOprogramme {
()O}{OOKOMENU
Station
Setting up TV stations
Assigning a station name
1. Repeat the ‘Manual programme tuning’ steps 1 to 3.
2. Press the
DD
/
EE
button to select Name.
3. Press the
GG
button on the Name pull-down menu.
4. Press the
DD
button. You can use a blank, +, -, the numeric 0 to 9
and the alphabet A to Z.
With the
EE
button you can select in the opposite direction.
5. Select the position by pressing the
FF
/
GG
button and then take
your choice of the second character, and so on.
6. Press the OK button.
7. Repeatedly press the MENU button to return to normal TV
viewing.
Booster (option)
In some models, Booster is an optional function. Only a set with
Booster can perform this function.
If the reception is poor at the fringe area of the TV signal, select
Booster to On.
1 Repeat the ‘Manual programme tuning’ steps 1 to 3.
2. Press the
DD
/
EE
button to select Booster.
3. Press the
GG
button.
4. Press the
DD
/
EE
button to select On or Off on the Booster pull-
down menu.
5. Press the OK button.
6. Repeatedly press the MENU button to return to normal TV
viewing.
Fine tuning
Normally fine tuning is only necessary if reception is poor.
1 Repeat the ‘Manual programme tuning’ steps 1 to 3.
2. Press the
DD
/
EE
button to select Fine.
3. Press the
GG
button.
4. Press the
FF
/
GG
button to fine tune for the best picture and
sound on the Fine pull-down menu.
5. Press the OK button.
6. Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will be indicated by yellow number
during programme selection.
12
Storage {
System {
Channel {
Fine {
Search {
Name {
Stored
Manual programme
{{{
PR
PR
OK
VOL
VOL
Auto
O
programme {
Manual
O
programme {
Program me
O
edit {
FavouriteOprogramme {
()O}{OOKOMENU
Station
Setting up TV stations
Programme edit
This function enables you to delete or skip the stored programmes.
You can also move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1. Press the MENU button to select the Station menu.
2. Press the
GG
button and then
DD
/
EE
button to select
Programme edit.
3. Press the
GG
button to display the Programme edit menu.
Deleting a programme
1. Select a programme to be deleted with the
DD
/
EE
or
FF
/
GG
button.
2. Press the RED button twice.
The selected programme is deleted, all the following pro-
grammes are shifted up one position.
Copying a programme
1. Select a programme to be copied with the
DD
/
EE
or
FF
/
GG
button.
2. Press the GREEN button.
All the following programmes are shifted down one position.
Moving a programme
1. Select a programme to be moved with the
DD
/
EE
or
FF
/
GG
button.
2. Press the YELLOW button.
3. Move the programme to the desired programme number with
the
DD
/
EE
or
FF
/
GG
button.
4. Press the YELLOW button again to release this function.
Skipping a programme number
1. Select a programme number to be skipped with the
DD
/
EE
or
FF
/
GG
button.
2. Press the BLUE button. The skipped programme turns to blue.
3. Press the BLUE button again to release the skipped pro-
gramme. When a programme number is skipped it means that
you will be unable to select it using the
DD
/
EE
button during nor-
mal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER but-
tons or select it in the programme edit or table menu.
Repeatedly press the MENU button to return to normal TV viewing.
0OOARO1DOOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOOCopy
MoveOOOOOOSkip
OOOOCO01
()} {OOKOMENU
Programme edit
0OOARO1DOOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
Move
O
Off
OOOOCO01
()} {OOMENU
Programme edit
13
PR
PR
OK
VOL
VOL
Auto
O
programme {
Manual
O
programme {
Program me
O
edit {
FavouriteOprogramme {
()O}{OOKOMENU
Station
Favourite programme
This function lets you select your favourite programmes directly.
1. Press the MENU button to select the Station menu.
2. Press the
GG
button and then
DD
/
EE
button to select Favourite
programme
.
3. Press the
GG
button to display the Favourite programme menu.
4. Press the
DD
/
EE
button to select -- -----.
5. Select a desired programme with the
FF
/
GG
button or NUMBER
buttons. Any number under 10 is entered with a numeric ‘
0’
(or
‘00’)
in front of it, i.e.
‘05’(or ‘005’)
for 5.
6. To store another programme, repeat steps 4 and 5.
You can store up to 8 programmes.
7. Press the OK button.
8. Repeatedly press the MENU button to return to normal TV
viewing.
Repeatedly press the FAVOURITE button to select stored favourite
programmes.
Setting up TV stations
14
Auto
O
programme {
Manual
O
programme {
Program me
O
edit {
FavouriteOprogramme {
}{O0_9O()OOKOMENU
56n Ca 05
Favourite programme
56n Ca 05
PR
PR
OK
VOL
VOL
Auto
O
programme {
Manual
O
programme {
Program me
O
edit {
FavouriteOprogramme {
()O}{OOKOMENU
Station
Calling the programme table
You can check the programmes stored in the memory by displaying
the programme table.
Displaying programme table
Press the LIST
(or INPUT)
button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Note :
a. You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b. Some programmes with the channel number shown in the pro-
gramme table indicate there is no station name assigned.
Selecting a programme in the programme table
Select a programme with the
DD
/
EE
or
FF
/
GG
button.
Then press the OK button.
The set switches to the chosen programme number.
Paging through a programme table
There are 10 (or 20) programme table pages which contain 100 (or
200)programmes.
Pressing the
DD
/
EE
or
FF
/
GG
button repeatedly turns the pages.
Press the LIST
(or INPUT)
button to return to normal TV viewing.
Setting up TV stations
15
0OOARO1DOOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
OOOOCO01
()} {OOKOMENU
Station
PR
PR
OK
VOL
VOL
Note: Picture menu options are not available for the RGB input
source.
PSM (Picture Status Memory)
1. Press the MENU button and then
DD
/
EE
button to select the
Picture menu.
2. Press the
GG
button to select PSM.
3. Press the
GG
button and then
DD
/
EE
button to select a picture
setting on the PSM pull-down menu.
4. Press the OK or
FF
button.
5. Repeatedly press the MENU button to return to normal TV
viewing.
The picture Dynamic, Standard, Mild and Game are pro-
grammed for good picture reproduction at the factory and cannot be
changed.
XD
You can enjoy the vivid and hi-definition picture with LG’s excellent
Digital Reality processor technology.
1. Press the MENU button and then
DD
/
EE
button to select the
Picture menu.
2. Press the
GG
button and then
DD
/
EE
button to select XD.
3. Press the
GG
button and then
DD
/
EE
button to select On or Off
on the XD pull-down menu.
4. Press the OK or
FF
button.
5. Repeatedly press the MENU button to return to normal TV
viewing.
Picture adjustment
16
Dynamic
Standard
Mild
Game
User
Dynamic
PSM {
XD {
Contrast {
Brightness {
Colour {
Sharpness {
()O}OOKOMENU
Picture
On
Off
PSM {
XD {
Contrast {
Brightness {
Colour {
Sharpness {
()O}{OOKOMENU
Picture
XD {
PR
PR
OK
VOL
VOL
PSM {
XD {
Contrast {
Brightness {
Colour {
Sharpness {
()O}{OOKOMENU
Picture
Picture adjustment
17
Eye (option)
Eye is an optional function. Only a set with eye option can perform
this function.
In some models, the set will automatically adjust the picture accord-
ing to the surrounding conditions. This will enable you to enjoy the
most suitable picture according to the surroundings.
Press the EYE/
*
button to switch the eye function on or off.
When the eye function is on, the most suitable picture is automati-
cally adjusted according to the surrounding conditions.
At this time the display in green does not appear continu-
ously but the display in yellow appears each time the picture
condition changes.
Note :
EYE function is not available for RGB input source.
Picture adjustment
You can adjust picture contrast, brightness, colour intensity, sharp-
ness and tint (NTSC input only) to the levels you prefer.
1. Press the MENU button and then
DD
/
EE
button to select the
Picture menu.
2. Press the
GG
button and then
DD
/
EE
button to select Contrast,
Brightness, Colour or Sharpness.
3. Press the
GG
button and then
FF
/
GG
button to make appropriate
adjustments on the each sub menu.
4. Press the OK button to store it for the picture User.
5. Repeatedly press the MENU button to return to normal TV
viewing.
Off
100
PSM {
XD {
Contrast {
Brightness {
Colour {
Sharpness {
()O}{OOKOMENU
Picture
}{O()OOKOMENU
Contrast 80
Contrast {
PR
PR
OK
VOL
VOL
Sound adjustment
18
SSM (Sound Status Memory)
You can select your preferred sound setting; Flat, Music, Movie or
Sports and you can also adjust the sound frequency of equalizer.
1. Press the MENU button and then
DD
/
EE
button to select the
Sound menu.
2. Press the
GG
button to select SSM.
3. Press the
GG
button and then
DD
/
EE
button to select a sound set-
ting on the
SSM pull-down menu.
Sound Frequency Adjustment
a. Press the
GG
button in User to display the User sub menu.
b. Select a sound band by pressing the
FF
/
GG
button.
c. Make appropriate sound level with the
DD
/
EE
button.
d. Press the OK button to store it for the sound
User.
Repeatedly press the MENU button to return to normal TV viewing.
The sound
Flat, Music, Movie and Sports are programmed for
good sound reproduction at the factory and cannot be changed.
Turbo sound selection
When this function is on, the sound will be more emphasized and
amplified than normal sound.
1. Press the MENU button and then
DD
/
EE
button to select the
Sound menu.
2. Press the
GG
button and then
DD
/
EE
button to select Turbo
Sound
3. Press the
GG
button and then
DD
/
EE
button to select On or off
4. Press the OK or
FF
button.
5. Repeatedly press the MENU button to return to normal TV
viewing.
Flat
Music
Movie
Sports
User
Flat
SSM {
Turbo 0Sound {
AVL {
Balance {
X-WAVE {
()O}OOKOMENU
Sound
On
Off
On
SSM {
Turbo 0Sound {
AVL {
Balance {
X-WAVE {
()O}OOKOMENU
Sound
PR
PR
OK
VOL
VOL
()O}{OOKOMENU
Sound
SSM {
Turbo
oSound {
AVL {
Balance {
X-WAVE {
()O}{OOKOMENU
0.1O0.5O1.5O5.0O10OkHz
Sound adjustment
19
Sound adjustment
You can adjust balance, AVL (Auto Volume Leveler), AVL automat-
ically keeps on an equal volume level even if you change pro-
grammes. The Turbo sound creates an all around sound as in a
concert hall.
1. Press the MENU button and then
DD
/
EE
button to select the
Sound menu.
2. Press the
GG
button and then
DD
/
EE
button to select the desired
sound item; AVL or Balance.
3. Make desired adjustment with the
FF
/
GG
,
DD
/
EE
or OK button
on each pull-down menu.
4. Press the OK button.
5. Repeatedly press the MENU button to return to normal TV
viewing.
X-WAVE (Wireless Sound) (option)
You can also listen to the sound through the FM receiver.
1. Press the MENU button and then
DD
/
EE
button to select the
Sound menu.
2. Press the
GG
button and then
DD
/
EE
button to select X-WAVE.
3. Press the
GG
button and then
DD
/
EE
button to select Set
Frequency
.
4. Press the
GG
button to tune in a frequency on the X-wave menu.
5. Use the number 0 to 9 or press the
FF
/
GG
button to match the
TV’s frequency and the FM receiver’s.
Note:
a. If the reception is poor or weak, select a different frequency.
b. For best results, there should be no more than 5m (16.4ft)
between the TV and FM Receiver.
c. In certain areas, the FM transmitter ability may be weak, such
as near a broadcast tower.
d. The reception sensitivity may depend on the kinds of receiver
(FM radio).
Sound
()O}{OOKOMENU
SSM {
Turbo 0Sound {
AVL {
Balance {
X-WAVE {
Off
Set
O
Freq
{
X-WAVE
FM 95.0 MHz
88 MHz 107MHz
}{0-9OOKOMENU
PR
PR
OK
VOL
VOL
()O}{OOKOMENU
Sound
SSM {
Turbo
oSound {
AVL {
Balance {
X-WAVE {
Sound adjustment
Sound output selection
In AV mode, you can select output sound for the left and right loud-
speakers.
Repeatedly press the I/II/
*
button to select the sound output.
L+R : Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
speaker.
L+L : Audio signal from audio L input is sent to left and right loud-
speakers.
R+R : Audio signal from audio R input is sent to left and right
loud-speakers.
Stereo/Dual reception
When a programme is selected, the sound information for the sta-
tion appears after the programme number and station name disap-
pear.
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II/
*
button twice. In mono reception the
depth of sound is improved. To switch back to stereo, press the
I/II/
*
button twice again.
Language selection for dual language broadcast
If a programme is received in two languages (dual language), you
can switch to
DUAL I, DUAL II or DUAL I+II by pressing the I/II/
*
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeak-
ers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends a separate language to each loudspeaker.
NICAM reception (option)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast by pressing the I/II/
*
button repeatedly.
1. When NICAM mono is received, you can select
NICAM
MONO
or FM MONO.
2. When NICAM stereo is received, you can select
NICAM
STEREO
or FM MONO. If the stereo signal is weak, switch to
FM mono.
3. When NICAM dual is received, you can select
NICAM DUAL
I
, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display
MONO appears on the
screen.
20
Broadcast
Mono
Stereo
Dual
On Screen Display
MONO
STEREO
DUAL I
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/