20
English
Select AXiS XS from the list.
Your Bluetooth device will conrm when
pairing has been completed, and AXiS XS will
display the blue Bluetooth logo on-screen.
During the pairing process, some
Bluetooth devices may prompt you to
enter a Passkey. Should your device
require a Passkey, enter 0000.
Should you experience problems
when pairing your device with
AXiS XS, please see the Bluetooth
Troubleshooting section on page 32.
Selecting and controlling music playback
can be done in one of two ways, either
directly from the source device (smartphone,
tablet or laptop), or from AXiS XS’s
touchscreen using the on-screen controls.
To exit Bluetooth mode and close
the connection between AXiS XS
and your source device, press the
X icon on the touchscreen.
Wirelessly stream music from your Bluetooth
smartphone, tablet, laptop or other Bluetooth
enabled device, directly to AXiS XS, without
the need for physical docking or connection.
‘Pairing’ occurs when two Bluetooth
devices talk to each other and establish
a connection. This connection is stored
in the memory of both devices, meaning
that once you ‘pair’ a particular device
with AXiS XS, you shouldn’t have to go
through the pairing process again.
Select the Bluetooth icon from the Home
Screen and AXiS XS will enter pairing mode.
On your Bluetooth device, ensure that
Bluetooth is enabled then initiate a ‘Search’
for a new device. When the ‘Search’
process has been completed, your
device will list all the available Bluetooth
devices in your close proximity.
Pairing with Bluetooth
Devices
Passkey
Streaming Music
Management of Multiple
Bluetooth Devices
How to pair a Bluetooth
device with AXiS XS
Please note, the playback volume level
can be independently controlled from
either AXiS XS or the source device.
If you have paired only one Bluetooth
device, on entering Bluetooth mode,
AXiS XS will automatically seek
to connect with this device.
Should you wish to pair another device,
repeat the pairimg procedure. Firstly
ensuring that any other paired devices have
Bluetooth functionality temporarily disabled
- otherwise AXiS XS will attempt to nd and
connect with a previously paired device.
Should you wish to clear all of the pairing
proles held in AXiS XS’s memory,
press the ‘Settings’ icon on the home
screen, then select ‘Miscellaneous
Settings’ and ‘Bluetooth Reset’.
After clearing AXiS XS’s Bluetooth memory,
please remember to delete devices from
the paired device list on your Bluetooth
device, before attempting to re-pair.
Bluetooth Mode
Clearing AXiS XS’s
Bluetooth Memory
16.20pm 31 Jul 2012
Pairing Mode
16.20pm 31 Jul 2012
Software Version
Display Backlight
Miscellaneous Settings
Bluetooth Reset
Factory Reset
16.20pm 31 Jul 2012