Arlec LV1987 is a multimedia projector designed for projecting movies, slideshows, and music in indoor or outdoor settings. It supports a variety of file formats including MP3, WAV, JPEG, BMP, PNG, AVI, MOV, and MP4. With a native resolution of 153600 pixels and a brightness of 150 Lux, it delivers clear and vibrant images. It also features a keystone correction of ±15° for image adjustment. The projector comes with a built-in speaker system and can be connected to external speakers or headphones via the 3.5mm auxiliary port.
Arlec LV1987 is a multimedia projector designed for projecting movies, slideshows, and music in indoor or outdoor settings. It supports a variety of file formats including MP3, WAV, JPEG, BMP, PNG, AVI, MOV, and MP4. With a native resolution of 153600 pixels and a brightness of 150 Lux, it delivers clear and vibrant images. It also features a keystone correction of ±15° for image adjustment. The projector comes with a built-in speaker system and can be connected to external speakers or headphones via the 3.5mm auxiliary port.
1
CPIN003891
A5 148mm x 210mm
WINDOW
PROJECTOR
kit
INSTRUCTION MANUAL
IMPORTANT! READ THESE INSTRUCTIONS CAREFULLY.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE
FOR FUTURE REFERENCE.
LV1987
Perfect for
projecting family
movie & slide
moments.
2 3
BEFORE YOU START
SPECIFICATIONS
SUPPORTED FILE FORMATS
FUNCTIONS
1. This Projector is designed for indoor use only –
for indoor viewing or outdoor viewing.
2. Use the original power adapter and power cord
supplied with the projector only. Failure to use
original accessories may cause fire hazard and
may void warranty.
3. Avoid looking directly into the lens when the
projector is ON.
4. Always operate in ventilated areas only. Ensure
the vents in the body are not covered while in
operation.
5. If not in use, turn off the projector and remove the
power cord.
6. Do not open the projector body. Servicing is to be
made by an authorized technician only.
7. This device is recommended for people aged 15 or
over. This product is not a toy. Keep it out of the
reach of children.
8. Use fresh CR2025 size battery for the remote
control.
9. If not in use for long period, remove the battery
from the remote.
Image System
TFT LCD
Brightness
150 Lux
Contrast Ratio
500:1
Native Resolution
153600 (RGB) Pixel
Supported Resolution
1920x1080
Light Source
LED
LED Lifetime
5,000 hours
Lens
F=125
Operation Mode
Manual
Projection Distance
1.07-3.31 m
Projection Size
30” - 100”
Aspect Ratio
4:3/16:9
No. Item Description Function
1 Keypad
Functions operating
keys
2 SD card slot Insert SD Card
3 IR Receiver
Remote control signal
receiver
4
Keystone track
wheel
Adjust the distortion
keystone
5 USB port
Connect the USB
Memory stick or hard
drive
6 Power Input Port 195mmx134mmx75mm
7 3.5mm aux port
Earphone port or
Speaker interface
8 Lens Adjust the focus
Mode File formats Supported
Mulitimedia
Audio MP3/WMA/ASF/OGG/AAC/WAV
Photo JPEG/BMP/PNG
Video AVI/MOV/ASF/3GP/MKV/RMVB/MP4/DIVX/FLV
Ok
Up
Left
Right
Down
Input
ExitVol Up
Vol Down
Left Right
Down
Turn Volume
UP
Volume
Down
Exit/
Return
Power
Input
Play/
Pause
Repeat
Menu Mute
Up
Power
Play/Pause
Menu
Ok
Colour
16.7K
Keystone Correction
±15°
Power Supply
12V-2.5A
Power Consumption
30W
Input
USB/SD Card (4GB SD
Card Provided)
Output
3.5mm earphone
Speaker
2x(8Ω 2W)
System
Multimedia
Language Supported
English, Spanish,
French + additional
Product Dimensions
195mmx134mmx75mm
Net Weight
0.75 Kg
1
2
3
4 5
6
7
8
THIS PRODUCT CONTAINS A LITHIUM COIN TYPE BATTERY.
WARNING! PLEASE ENSURE THE COIN
BATTERY IS KEPT OUT OF REACH OF CHILDREN.
The battery presents a significant choking and burn hazard to young
children should they swallow a battery. Under 4 year-olds are especially
prone to accidental swallowing of objects such as these.
If a lithium coin battery is swallowed, SEEK IMMEDIATE MEDICAL ATTENTION.
Do not let the child eat or drink. Do not induce vomiting.
TO KEEP YOUR CHILDREN SAFE:
• Keep devices that use coin batteries out of reach of small children.
• Keep new batteries in their packaging until ready to use and store in
places out of reach of children.
• Safely dispose of spent batteries immediately.
• Share this information with your family, friends, caregivers
and babysitters.
We have designed the coin battery holder to require dexterity normally
beyond that of a small child to access, but nevertheless you should
always follow the advice given above.
CPIN003891
A5 148mm x 210mm
4 5
ADDING MORE FILES TO SD CARD / USB
PLAYING THE MEDIA FILE
For SD Card:
1. Insert to a SD card reader and connect to a
computer USB outlet.
2. For movies, choose either horizontal or vertical for
your preferred display, then select the category.
Add the movie into the selected folder.
3. For slideshows or music, add them in the main
menu folder, as shown below. Once the SD card is
inserted into the projector, they are automatically
categorized in the multimedia menu.
For USB:
1. Connect the USB to a computer USB outlet.
2. Add movies, slideshows or music in the main
menu folder. Once the USB is inserted into the
projector, they are automatically categorized in
the multimedia menu.
1. Multimedia Menu: On selecting the Input Source, Projector will open the Multimedia
Menu where you can select the type of media file you want to play (Movies, Music or
Images). Use the arrow keys to navigate and Press OK key to select.
2. File selection: On selecting the Media file type, you will be directed to the file
explorer, showing the files/folders as per the media type in your input source:
Return: Navigates back to the Multimedia menu.
Up Folder: Returns to the portrait settings.
Horizontal/Vertical: Selects either horizontal or vertical display.
Navigate with arrow keys and press OK to select the desired files. They will now be
marked with a check mark on the upper right corner of the icon.
Note: Multiple media files can be selected simultaneously for sequential playback.
Only one type of media file can be played at any one time.
3. PLAY: After selecting the files you want to play, press the Play/Pause button to start
playing. The selected media files will play and repeat.
4. Reverse Imaging: If you want to watch from the other side of the screen eg. For outdoor
viewing with screen installed on clear window. Press Turn key from reverse imaging.
Input Source: To select the input source, insert the SD Card or USB drive in slot behind
the projector. Press the Input key on projector or remote and select the source from
where you want to play your media file. Use Up and Down key to toggle between the
options. Once your desired option is highlighted press the OK key to select the source. SD
Card is set as the default source of input.
Multimedia
MOVIE SLIDE SHOW MUSIC
USB 2.0
If you want to use your own personal clips for your festive occasions, they can be added by inserting your SD card
to a SD card reader (not provided) or plug the USB directly to a computer:
SETTINGS
1. Picture: This setting lets you make changes
to display. Following settings can be adjusted
by navigating to their respective submenu and
selecting them.
a. TXT
b. COLORS
c. ASPECT RATIO
d. SCREENS
e. NOISE REDUCTION
2. Sound: This setting lets you make adjustments to
sound as per user requirement. Following settings
can be adjusted
a. MODE
b. AUTO VOLUME
c. SURROUND SOUND
d. EQUALIZER
3. Time: This setting lets you make the time related
adjustments. Following are the sub options
a. TIME SETTINGS
b. SLEEP TIMER
c. AUTO SLEEP
4. System Settings: This setting lets you make
changes to the system software. Following are the
sub options available
a. LANGUAGE
b. RESTORE FACTORY SETTINGS
c. SOFTWARE UPDATES
To change the settings, press the Menu key on the Projector or remote. This will open the settings screen.
Use the arrow keys to toggle between different types of settings mentioned below.
PROJECTOR OPERATION
1. Place the projector on a levelled surface, pointing
towards the screen or a wall.
2. Connect the adapter to the projector and then
switch on the AC power supply. The indicator light
on the projector will flash signalling the projector
is in stand-by mode.
3. Press the Power button on the projector or remote
to switch the projector ON.
4. The multimedia menu should now come up. If it is
out of focus, manually rotate the lens clockwise
or anti-clockwise until you receive the clearest
picture quality. If the focus is not yet achieved,
consider positioning the projector closer or further
from the screen.
5. If the picture is slightly distorted, use the
KEYSTONE tracking wheel from the rear of the
projector to balance it.
6. To return to stand-by mode, press the power
button on the projector or the remote. Pressing the
power button again to switch off the device.
INTRODUCTION
LV1987 is an animated window display projector
that is pre-loaded with 20 festive clips, including a
variety of Halloween and Christmas scenes for your
festive occasions.
The projector also comes in either horizontal
or vertical orientation mounting for your
preferred display.
PROJECTOR SET UP
Use the included projector screen with two-sided
tape to attach to your window or wall. Make sure that
screen is stretched in order to minimize creases in
the fabric. Place the projector on a levelled surface
at a distance of 1-3m from the screen. Use a tripod for
improved viewing angle.
If you want to view from outside, install the screen
on the window and direct the projector towards the
screen from indoor area. Press the turn key for
reverse imaging.
7 8
CPIN003891
Arlec guarantees this product in accordance with the Australian
Consumer Law and all other applicable Australian and New Zealand
laws that are unable to be excluded.
Arlec also warrants to the original first purchaser of this product
(“you”) from a retailer with which this document is given that this
product will be free of defects in materials and workmanship for a
period of 12 months from the date of purchase; provided the product
is not used other than for the purpose, or in a manner not within the
scope of the recommendations and limitations, specified by Arlec, is
new and not damaged at the time of purchase, has been maintained
in accordance with the recommendations specified by Arlec, has not
been subjected to abuse, misuse, neglect or damage, has not been
modified or repaired without the approval of Arlec and has not been
used for commercial purposes (“Warranty”).
If you wish to claim on the Warranty, you must, at your own expense,
return the product, and provide proof of original purchase and your
name, address and telephone number, to Arlec at the address below
or the retailer from whom you originally purchased the product within
12 months from the date of purchase.
Arlec will (or authorise the retailer to) assess any claim you may
make on the Warranty in the above manner and if, in Arlec’s
reasonable opinion, the Warranty applies, Arlec will at its own option
and expense (or authorise the retailer to) replace the product with
the same or similar product or repair the product and return it to
you or refund the price you paid for the product. Arlec will bear its
own expenses of doing those things, and you must bear any other
expenses of claiming on the Warranty.
For goods purchased in Australia (only):
The Warranty is in addition to other rights and remedies you may have
under a law in relation to the product to which the Warranty relates.
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure.
For goods purchased in New Zealand (only):
The Warranty is in addition to, and does not affect, other rights and
remedies you may have under a law in relation to the product to
which the Warranty relates.
Our goods come with guarantees that can only be excluded under the
New Zealand Consumer Guarantees Act 1993 to the extent you are
acquiring the product for a business purpose and it would be fair and
reasonable for Arlec to contract out of those guarantees.
Arlec Australia Pty. Ltd. ACN 009 322 105 gives the Warranty for
goods purchased from a retailer in Australia by you and Arlec New
Zealand Limited NZBN 9429030738294 gives the Warranty for goods
purchased from a retailer in New Zealand by you (collectively Arlec).
Arlec’s telephone number, address and email
address for purposes of giving the Warranty are:
Telephone Number:
1800 826 859 (in Australia)
0800 003 329 (in New Zealand)
Street Address:
Building 3, 31-41 Joseph Street,
Blackburn North, Victoria, 3130, Australia
Postal Address:
Blackburn North LPO, P.O. Box 1065,
Blackburn North, 3130, Australia
Email: custservice@arlec.com.au
WARRANTY
-
1
-
2
-
3
-
4
Arlec LV1987 is a multimedia projector designed for projecting movies, slideshows, and music in indoor or outdoor settings. It supports a variety of file formats including MP3, WAV, JPEG, BMP, PNG, AVI, MOV, and MP4. With a native resolution of 153600 pixels and a brightness of 150 Lux, it delivers clear and vibrant images. It also features a keystone correction of ±15° for image adjustment. The projector comes with a built-in speaker system and can be connected to external speakers or headphones via the 3.5mm auxiliary port.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Arlec UC0074 User manual
-
Arlec RC10 Operating instructions
-
-
-
Arlec DC688 Installation & Operating Instruction
-
-
-
-
-
Other documents
-
Nextech QM3752 TFT LCD Monitor User manual
-
CONCORD AC5010CSW4WH20B4K-A Owner's manual
-
Marine Tech QM3814 Owner's manual
-
DigiTech SL-3542 5-In-1 Ball Waterwave Laser UV and Strobe Party Light User manual
-
DigiTech SL3515 Owner's manual
-
Vamvo 874842 User manual
-
GooDee GD-600 User manual
-
AAXA M7 User manual
-
Coolway CWAC11 User manual
-
Antsig AP861 Quick start guide
