Clarity WALKER WS-2749 User manual

Brand: Clarity

Model: WALKER WS-2749

Type: User manual

User Guide

Ampliﬁed Transmit

Volume Control Handset

WS-2749

PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS EQUIPMENT

INSTALLATION

1. Remove modular plug on the coiled cord from the end of

the old handset. This plug is easily removed by by pressing

the tab on the plug, and pulling away from the receptacle

(opening). (See Figure 2)

2. Re-insert this plug into the receptacle (opening) on the

end of the handset. Be sure it “snaps” into place.

This completes the installation of the modular handset.

OPER ATION

The transmit volume of this handset is controlled with the

rotary volume control, conveniently located on the handle

of the handset.

1. To increase the volume of the sound from the trans-

mitter, rotate the volume control wheel upward. The

volume control rotates very easily, requiring only a

slight touch of the ﬁngertips to adjust the sound to your

ideal listening level. (See Figure 3)

2. Normal transmit sound is obtained when the volume

control wheel rotated downward until it stops.

(See Figure 3)

KEY FEATURES

This ampliﬁed transmitter handset is designed to provide increased volume to the

outgoing sound for the convenience of the user under a variety of conditions. The

electronic circuitry is completely contained

in the handset with these exclusive features:

• Distortion-free amplier.

• Rotary volume control conveniently

located on the handle for easy

ﬁngertip control.

• Quick and easy installation. It simply

repalces your old handset.

• Excellent for weak speech.

Figure 3

Figure 2

Modular

Plug Tab

program redial

signal

flash hold

abc def

jklghi mno

tuv

oper

pgrs wxyz

help

mute

boost

Figure 1: The volume control phone simply

replaces your old handset.

PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS EQUIPMENT

3. After familiarizing yourself with the ease of operation

of this handset, there will be no further need for you to

look at the rotary volume control while adjusting the

sound. This can easily be accomplished while holding

the handset.

SPECIFICATIONS

Ampliﬁer: Normal gain of 26 dB to outgoing sound.

Receiver: Compatiible with hearing aids.

MAINTENANCE

The volume control handset may be cleaned when necessary

with a mild detergent. Use damp (not wet) cloth. Never use

abrasives or solvents.

This handset is designed for long service and dependable

operation. If any problem with your telephone service

occurs, disconnect the volume control handset. If the

trouble still exists, notify your telephone company. If such

disconnection ends the problem, the volume control hand-

set may be the source of the trouble and should be repaired

before reconnecting.

FCC regulations require that the repair of customer-owned

phones must be performed by the manufacturer of such

equipment.

Proof of original purchase date (sales receipt) must be

mailed with the unit when requesting warranty service.

For out-of-warranty service, and current repair fees, call:

Clarity Customer Service Department

800-426-3738

4289 Bonny Oaks Drive, Suite 106

Chattanooga, Tennessee 37406

Please read the conditions set forth in the warranty

on the next page of this guide.

CLARITY

LIMITED WARRANTY

Clarity warrants each item of new telephone equipment manufactured by it against defects

in material or workmanship for a period of one (1) year from the date of original purchase.

Your purchase includes the following warranty which is in lieu of all other express warran-

ties. This warranty starts upon purchase. It stops if you rent, sell, give away, put any foreign

device on the equipment, or at the expiration of the applicable warranty period. Clarity

agrees to repair, or at its own option, replace any defective equipment or part therof,

without charge for either parts or labor.

The duration of any and all express and implied warranties shall extend for a period of one

(1) year from the date of original purchase.

It is the responsibility of the person who installs the equipment to correctly install for

proper operation. This warranty does not cover damage resulting from accident, misuse

or abuse, improper installation or operation, lack of reasonable care, the afxing of any

attachment not provided with the product and loss of parts and is voided in the event any

unauthorized person alters or repairs the equipment.

No resonsibility is assumed for any special, incidental or consequencial damages.

Telephone companies use different types of equipment and Clarity does not warrant that

its equipment is compatible with the equipment of a particular telephone company.

If failure occurs and your equipment is under warrant, service shall be provided by return-

ing the equipment, with shipping costs prepaid, to the following address:

Clarity Service Center

4289 Bonny Oaks Drive, Suite 106

Chattanooga, Tennessee 37406

The equipment will be repaired or replaced if examination by Clarity determines the equip-

ment to be defective. Equipment received damaged as a result of shipping will require you

to ﬁle a claim with the carrier.

This warranty gives you speciﬁc legal rights and you may also have other rights which vary

from state to state. Some states do not allow the exclusion or limitation of special, inciden-

tial or consequencial damages or limitations on how long an implied warranty lasts, so the

above exclusion and limitation may not apply to you.

Clarity, a Division of Plantronics, Inc.

4289 Bonny Oaks Drive, Suite 106, Chattanooga, TN 37406

1-800-552-3368

clarityproducts.com

device, Clarity and the amplification device combined, Clarity Power, and C1000 are trademarks or registered

trademarks of Plantronics, Inc. FCC Registration complies with part 68 of FCC rules and regulations.

Rev. A (2-08)

Clarity WALKER WS-2749 User manual

Clarity WALKER WS-2749 User manual

Clarity WALKER WS-2749 User manual

Related papers

Other documents