Outpak 945-123030 Installation guide

Are You Compliant?

Outpak Concrete Washout® unit is designed to be a portable solution for

harmful industrial concrete sediment, paint, dry wall mud, stucco, and

mortar

With Outpak Concrete Washouts your job site will be organized,

eco-friendly, and BMP compliant to avoid costly fines.

They are designed for

a simple and quick set-up in minutes and can remain for the duration of the

project.

Outpak Concrete Washout is compatible for both mixer, pump trucks

and wheel barrows. Dispose of after evaporation and job completion.

Easy Setup

Setup really couldn’t be easier:

Important - For exterior use only. Select an appropriate area to deploy washout. Outside with easy access

for mechanical lift (if necessary), where incidental splash out will not harm valuable property is

recommended. Limit child access at all times.

Step 1: Unpack the corrugated washout.

Step 2: Unfold the patented design.

Step 3: Cover the interior of washout with the enclosed 6mil poly bag. Fold top of bag over exterior sides of washout.

Setup literally takes seconds!

Tie off top of liner at the end of use to prevent child access to content.

Corrugate Washout

Outpak Corrugate Washout is a

Universal, “portable” washout

Good

for mixer truck, and wheel barrow

washout containment.

Dispose of

after job completion.

This manual is also suitable for