Dale Tiffany STT13025 Installation guide

ASSEMBLY INSTRUCTIONS:

Item No: STT13025

1. Insert the harp (B) into the saddle until it sits firmly

into the socket cup.

2. Adjust the knurl nut (C) on the harp (B).

This can be used to raise the shade (D) a little if necessary.

3. Place the shade (D) over the end of the harp (B) and tighten with

the finial (E) securing the shade (D) in place.

4. Insert the bulbs into the bulb sockets.

Uses (1) maximum 60 Watt Type “A” Bulb or

(1) maximum 13Watt CFL Bulb (Bulb not included).

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth. Do not use abrasives.

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China Revision -03/27/13

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL

PACKAGING TO MINIMIZE DAMAGE.

Page is loading ...

Download PDF