For desktop use suitable stands are available from ADAM
Audio that are designed to enhance the acoustic setup of the
following models: F5, A3X, A5X, ARTist 3 and ARTist 5.
These stands align the tweeters to ear level, minimize direct
desk surface reflectlions and by doing this, optimize the
amount of primary sound. Non-slip rubber coatings on both
the set-up area and underneath the stand ensure solid foothold
and acoustic decoupling of the speaker.
The desktop stands are available in black or white. Material:
coated MDF.
ADAM Desktop Stands
ADAM Audio GmbH
| GERMANY | phone: +49 30-863 00 97-0 | fax: +49 30-863 00 97-7 | email: [email protected]www.adam-audio.com
All dimensions in millimeters