Cannondale CAAD 4 Operating instructions

CAAD 4 ROAD BIKE ASSEMBLY SUPPLEMENT

The CAAD 4 road bike frame uses cable housing stops on the downtube for the routing of the shift

cables. In order to most easily adjust the shift cable tension, use the included adjusting barrels in

the cable stops before routing the cables through to the derailleurs.

See the following illustration regarding the proper installation of each adjusting barrel (part# 106373

or Quality Bicycle Products # BR4040) into the existing cable stops on the bike’s downtube. Position

the two small wings on the barrel against the frame to keep it from rotating in the cable stop.

NOTE: The use of these adjusting barrels is optional. They simply aid in

the adjusting of derailleur cable tension.

For more information on this or any Cannondale product, please feel free

to contact us.

USA and Canada: . . . . . . . . . . . . . . . . . . . (800) BIKE-USA

Europe (EC): . . . . . . . . . . . . . . . . . . (31) 5415-89898

Japan: . . . . . . . . . . . . . . . . . (81) 722-99-9399

Australia: . . . . . . . . . . . (612) 9979-5851

http://www.cannondale.com

CAAD4 Adjustment Barrel.qxp3 8/25/98 3:42 PM Page 1