External Notebook CPU Cooling Fan - Installation Guide
NNBBFFAANN
Revised: 12 December 2005 (A)
Press the button on the right side
of the Notebook Fan, in order to
adjust the spacing of the fastening
teeth so that they are properly
aligned with the perimeter of your
notebookâs vent. Insert the fasten-
ing teeth into the vent slots and
release the aforementioned but-
ton.
Tighten the dial until the Notebook
Fan is securely fastened to the
vent.
Insert the USB connector provided
by the Notebook Fan, to an avail-
able USB port on the notebook.
Once the USB connection is made
to a powered notebook, NBFAN will
engage and begin cooling. Please
note that this product offers two fan
speeds. To increase fan speed,
press the silver button located on
the attached dongle. To switch back
to aregular speed, click the button
again.
Installation is complete.
-
1
